Infiniti M35/M45 Y50. Manual — part 254
INTELLIGENT KEY SYSTEM
BL-85
C
D
E
F
G
H
J
K
L
M
A
B
BL
REMOTE KEYLESS ENTRY FUNCTION MALFUNCTION
NOTE:
●
Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to
77, "Trouble Diagnosis Procedure"
●
Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.
●
If the following “symptoms” are detected, check systems shown in the “Diagnosis/service procedure” col-
umn in this order.
Conditions of Vehicle (Operating Conditions)
●
Intelligent Key is out of key slot.
●
Ignition switch is not ON position.
●
All doors are closed.
Door lock/unlock does not operate by request
switch (driver side).
1.
Check door request switch (driver side).
2.
Check outside key antenna (driver side).
3.
Replace Intelligent Key unit.
Door lock/unlock does not operate by request
switch (passenger side).
1.
Check door request switch (passenger side).
2.
Check outside key antenna (passenger side).
3.
Replace Intelligent Key unit.
Selective unlock function does not operate by
door request switch (driver side) (other door
lock function operate).
1.
Check “SELECT UNLOCK FUNCTION” setting in
“WORK SUPPORT”.
2.
Check selective unlock function with a remote control-
ler or door key cylinder.
3.
Replace BCM.
Selective unlock function does not operate by
door request switch (passenger side) (other
door lock function operate).
1.
Check “SELECT UNLOCK FUNCTION” setting in
“WORK SUPPORT”.
2.
Replace Intelligent Key unit.
Auto lock function does not operate.
1.
Check “AUTO RELOCK TIMER” setting in “WORK
SUPPORT”.
2.
Check door switch.
3.
Check key slot.
4.
Replace BCM.
Key reminder function does not operate.
1.
Check “ANTI KEY LOCK IN FUNCTION” setting in
“WORK SUPPORT”.
2.
Check door switch.
3.
Check inside key antenna.
4.
Check unlock sensor.
5.
Check Intelligent Key battery inspection.
6.
Replace Intelligent Key unit.
Symptom
Diagnosis/service procedure
Reference page
Symptom
Diagnosis/service procedure
Reference
page
All of the remote keyless entry functions
do not operate.
1.
Check Intelligent Key battery inspection.
2.
Replace Intelligent Key unit.
Selective unlock function does not operate
by Intelligent Key.
1.
Check “SELECT UNLOCK FUNCTION” setting in “WORK SUP-
PORT”.
2.
Check Intelligent Key battery inspection.
3.
Replace Intelligent Key unit.
BL-86
INTELLIGENT KEY SYSTEM
TRUNK OPEN FUNCTION MALFUNCTION
NOTE:
●
Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to
77, "Trouble Diagnosis Procedure"
●
Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.
●
If the following “symptoms” are detected, check systems shown in the “Diagnosis/service procedure” col-
umn in this order.
Conditions of Vehicle (Operating Conditions)
●
Intelligent Key is out of key slot.
●
All doors are closed.
Auto lock function does not operate prop-
erly.
1.
Check “AUTO RELOCK TIMER” setting in “WORK SUPPORT”.
2.
Check door switch.
3.
Check key slot.
4.
Replace BCM.
Key reminder function does not operate.
1.
Check “ANTI KEY LOCK IN FUNCTION” setting in “WORK SUP-
PORT”.
2.
Check door switch.
3.
Check inside key antenna.
4.
Check unlock sensor.
5.
Check Intelligent Key battery inspection.
6.
Replace Intelligent Key unit.
Panic alarm function does not operate.
1.
Check “PANIC ALARM DELAY” setting in “WORK SUPPORT”.
2.
Check theft warning operation.
3.
Check Intelligent Key battery inspection.
4.
Check key slot.
5.
Replace Intelligent Key unit.
Symptom
Diagnosis/service procedure
Reference
page
Symptom
Diagnosis/service procedure
Reference page
Trunk open function does not operate by trunk
opener request switch.
1.
Check trunk opener request switch.
2.
Check trunk lid opener cancel switch.
3.
Check outside key antenna (trunk room).
4.
Replace Intelligent Key unit.
Trunk open function does not operate by Intelli-
gent Key.
1.
Check “TRUNK OPEN DELAY” setting in “WORK
SUPPORT”.
2.
Check trunk lid opener system.
3.
Check trunk room lamp switch.
4.
Check Intelligent Key battery inspection.
5.
Replace Intelligent Key unit.
Key reminder function does not operate.
1.
Check door switch.
2.
Check trunk room lamp switch.
3.
Check inside key antenna (trunk room).
4.
Check trunk lid opener system.
5.
Replace Intelligent Key unit.
INTELLIGENT KEY SYSTEM
BL-87
C
D
E
F
G
H
J
K
L
M
A
B
BL
HAZARD AND BUZZER REMINDER FUNCTION MALFUNCTION
NOTE:
●
Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to
77, "Trouble Diagnosis Procedure"
●
If the following “symptoms” are detected, check systems shown in the “Diagnosis/service procedure” col-
umn in this order.
Conditions of Vehicle (Operating Conditions)
●
“LOCK/UNLOCK BY I-KEY” is ON when setting on CONSULT-II.
●
“ANSWER BACK FUNCTION” is ON when setting on CONSULT-II.
●
Ignition switch is in OFF position.
●
All doors are closed.
●
Intelligent Key is out of key slot.
HAZARD AND HORN REMINDER FUNCTION MALFUNCTION
NOTE:
●
Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to
77, "Trouble Diagnosis Procedure"
●
Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.
●
If the following “symptoms” are detected, check systems shown in the “Diagnosis/service procedure” col-
umn in this order.
Conditions of Vehicle (Operating Conditions)
●
“ANSWER BACK FUNCTION” is ON when setting on CONSULT-II.
●
Ignition switch is in OFF position.
●
All doors are closed.
Symptom
Diagnosis/service procedure
Reference page
Hazard reminder does not operate by
request switch.
(Horn reminder operate.)
1.
Check “HAZARD ANSWER BACK” setting in “WORK
SUPPORT”.
2.
Check hazard function with hazard switch.
3.
Replace Intelligent Key unit.
Buzzer reminder does not operate by request
switch.
(Hazard reminder operate.)
1.
Check “ANSWER BACK WITH I-KEY LOCK” or
“ANSWER BACK WITH I-KEY UNLOCK” setting in
“WORK SUPPORT”.
2.
Check Intelligent Key warning buzzer.
3.
Replace Intelligent Key unit.
Buzzer reminder does not operate by trunk
opener request switch.
1.
Check “TRUNK/GLASS HATCH OPEN” setting in “WORK
SUPPORT”.
2.
Check Intelligent Key warning buzzer.
3.
Check trunk opener lid system.
4.
Replace Intelligent Key unit
Symptom
Diagnosis/service procedure
Reference page
Hazard reminder does not operate by Intelli-
gent Key button.
(Horn reminder operate.)
1.
Check “HAZARD ANSWER BACK” setting in “WORK
SUPPORT”.
2.
Check hazard function with hazard switch.
3.
Replace Intelligent Key
Horn reminder does not operate by Intelligent
Key button (door lock/unlock button).
(Hazard reminder operate.)
1.
Check “HORN WITH KEYLESS LOCK” setting in “WORK
SUPPORT”.
2.
Check horn function.
3.
Replace Intelligent Key unit
BL-88
INTELLIGENT KEY SYSTEM
POWER WINDOW DOWN FUNCTION MALFUNCTION
NOTE:
●
Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to
77, "Trouble Diagnosis Procedure"
●
If the following “symptoms” are detected, check systems shown in the “Diagnoses/service procedure” col-
umn in this order.
Conditions of Vehicle (Operating Conditions)
●
Ignition switch is in OFF or ACC position.
●
Retained power operation does not operate. Refer to
GW-17, "RETAINED POWER OPERATION"
WARNING FUNCTION MALFUNCTION
NOTE:
●
Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to
77, "Trouble Diagnosis Procedure"
●
Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.
●
If the following “symptoms” are detected, check systems shown in the “Diagnosis/service procedure” col-
umn in this order.
Conditions of Vehicle (Operating Conditions)
Warning chime functions operating condition is extremely complicated, during operating confirmations, recon-
firm the list above twice in order to ensure proper operation.
Symptom
Diagnosis/service procedure
Reference page
Power window down function does not
operate.
1.
Check “P/W DOWN DELAY” setting in “WORK SUPPORT”.
2.
Check Intelligent Key battery inspection.
Symptom
Diagnosis/service procedure
Reference page
OFF position warn-
ing does not oper-
ate.
For internal
1.
Check ignition switch position.
2.
Check door switch.
3.
Check warning chime function.
4.
Replace Intelligent Key unit.
For external
1.
Check ignition switch position.
2.
Check door switch.
3.
Check Intelligent Key warning buzzer.
4.
Replace Intelligent Key unit.
P position warning does not operate.
1.
Check Park position switch.
2.
Check door switch.
3.
Check Intelligent Key warning buzzer.
4.
Check warning chime function.
5.
Check combination meter display.
6.
Replace Intelligent Key unit.
ACC warning does not operate
1.
Check ignition switch position.
2.
Check warning chime function.
3.
Check combination meter display.
4.
Replace Intelligent Key unit.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст