Infiniti M35/M45 Y50. Manual — part 747
COWL TOP
EI-19
C
D
E
F
G
H
J
K
L
M
A
B
EI
●
Slide the pin while aligning with the concave part of E.
●
Engage the joint of plastic pawl of A with D, and then assemble
cowl top covers LH (1) and RH (2).
CAUTION:
After installing, perform adjustment of wiper arm. Refer to
WW-43, "Removal and Installation of Front
Wiper Arms, Adjustment of Wiper Arms Stop Location"
PIIB5079E
EI-20
FENDER PROTECTOR
FENDER PROTECTOR
PFP:63840
Removal and Installation
NIS0024J
REMOVAL
1.
Remove rear end screw of fender protector (rear).
2.
Remove clips of fender protector (rear).
3.
Remove plastic clamp from wheelhouse arches, and then remove fender protector (rear) from wheel
house.
4.
Remove screws of front under cover.
5.
Remove front end screw of fender protector (front).
6.
Remove front end clip of fender protector (front).
7.
Remove fender protector (front) from wheel house.
INSTALLATION
Install in the reverse order of removal.
1.
Fender protector (front)
2.
Fender protector (rear)
PIIB2940J
FENDER PROTECTOR
EI-21
C
D
E
F
G
H
J
K
L
M
A
B
EI
Rear Wheel House Protector
NIS0024K
REMOVAL AND INSTALLATION
REMOVAL
1.
Remove screw of rear portion wheel house protector. (rear bumper side)
2.
Remove screw of front portion wheel house protector. (center mud guard side)
3.
Remove clips of wheel house protector.
4.
Remove resin nuts of arch portion wheel house protector and remove rear wheel house protector.
INSTALLATION
Install in reverse order of removal.
1.
Rear wheel house protector
PIIB3602J
EI-22
CENTER MUD GUARD
CENTER MUD GUARD
PFP:76850
Removal and Installation
NIS0024L
REMOVAL
1.
Remove screw and nuts of wind deflector and remove wind
deflector.
2.
Remove screws of mudguard front/rear side.
3.
Remove screws of mudguard lower side.
4.
Fully open front door and rear door.
5.
Remove clips from back of mudguard using clip clamp remover.
6.
Remove center mudguard from body side.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
When installing center mud guard, make sure that clips are securely fitted in panel holes on body, and
then press them in.
1.
Center mud guard
PIIB2941J
PIIB3973J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст