Infiniti M35/M45 Y50. Manual — part 102
REPAIR FOR COMPONENT PARTS
AT-331
D
E
F
G
H
I
J
K
L
M
A
B
AT
CAUTION:
If necessary, replace the input clutch assembly.
Front Carrier
●
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the front carrier assembly.
Rear Internal Gear
●
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the rear internal gear.
ASSEMBLY
1.
Install input clutch.
a.
Install drive plates, driven plates and retaining plate in input
clutch drum.
●
Snap ring (1)
●
Retaining plate (2)
●
Drive plate (3)
●
Driven plate (4)
●
Drive plate/Driven plate: 7/7
CAUTION:
Take care with order of plates.
b.
Using a flat-bladed screwdriver, install snap ring in input clutch
drum.
c.
Install needle bearing in input clutch assembly.
CAUTION:
●
Take care with the direction of needle bearing. Refer to
AT-298, "Locations of Adjusting Shims, Needle Bearings,
Thrust Washers and Snap Rings"
●
Apply petroleum jelly to needle bearing.
SCIA7133E
SCIA2864E
SCIA2853E
AT-332
REPAIR FOR COMPONENT PARTS
d.
Install O-ring and seal rings in input clutch assembly.
CAUTION:
●
Do not reuse O-ring and seal rings.
●
Apply ATF to O-ring.
●
Apply petroleum jelly to seal rings.
2.
Install front carrier assembly.
a.
Install snap ring to front carrier assembly.
CAUTION:
Do not expand snap ring excessively.
b.
Install needle bearing in front carrier assembly.
CAUTION:
●
Take care with the direction of needle bearing. Refer to
AT-298, "Locations of Adjusting Shims, Needle Bearings,
Thrust Washers and Snap Rings"
.
●
Apply petroleum jelly to needle bearing.
c.
Install bearing race in front carrier assembly.
CAUTION:
Apply petroleum jelly to bearing race.
d.
Install front carrier assembly to input clutch assembly.
3.
Compress snap ring using 2 flat-bladed screwdrivers.
4.
Install front carrier assembly and input clutch assembly to rear
internal gear.
SCIA5235E
SCIA5476E
SCIA5233E
SCIA2847E
SCIA5339E
REPAIR FOR COMPONENT PARTS
AT-333
D
E
F
G
H
I
J
K
L
M
A
B
AT
Mid Sun Gear, Rear Sun Gear, High and Low Reverse Clutch Hub
NCS001R7
COMPONENTS
VQ35DE models
VK45DE models
SCIA7071E
1.
Needle bearing
2.
Bearing race
3.
Snap ring
4.
High and low reverse clutch hub
5.
Needle bearing
6.
Snap ring
7.
1st one-way clutch
8.
Rear sun gear
9.
Seal ring
10. Mid sun gear
Refer to GI section to make sure icons (symbol marks) in the figure. Refer to
.
SCIA7072E
1.
Needle bearing
2.
Bearing race
3.
Snap ring
4.
High and low reverse clutch hub
5.
Needle bearing
6.
Snap ring
7.
1st one-way clutch
8.
Rear sun gear
9.
Seal ring
10. Mid sun gear
Refer to GI section to make sure icons (symbol marks) in the figure. Refer to
.
AT-334
REPAIR FOR COMPONENT PARTS
DISASSEMBLY
1.
Remove needle bearing and bearing races from high and low reverse clutch hub.
●
VQ35DE models
●
VK45DE models
2.
Using a pair of snap ring pliers, remove snap ring from mid sun
gear assembly.
CAUTION:
Do not expand snap ring excessively.
3.
Remove high and low reverse clutch hub from mid sun gear
assembly.
SCIA2854E
SCIA5238E
SCIA2855E
SCIA2856E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст