Infiniti FX35 / FX45. Manual — part 457
SNOW MODE SWITCH
EC-589
< SERVICE INFORMATION >
[VQ35DE]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
4.
Also check harness for short to ground and short to power.
OK or NG
OK
>> GO TO 9.
NG
>> Repair open circuit or short to ground or short to power in harness or connectors.
7.
CHECK GROUND CONNECTIONS
1.
Turn ignition switch OFF.
2.
Loosen and retighten ground screw on the body.
Refer to
OK or NG
OK
>> GO TO 8.
NG
>> Repair or replace ground connections.
8.
CHECK SNOW MODE INDICATOR LAMP GROUND CIRCUIT FOR OPEN AND SHORT
1.
Check harness continuity between snow mode switch terminal 2 and ground.
Refer to Wiring Diagram.
2.
Also check harness for short to power.
OK or NG
OK
>> GO TO 9.
NG
>> Repair open circuit or short to power in harness or connectors.
9.
CHECK SNOW MODE SWITCH
EC-1185, "Component Inspection"
.
OK or NG
OK
>> GO TO 10.
NG
>> Replace snow mode switch.
10.
CHECK INTERMITTENT INCIDENT
>> INSPECTION END
Component Inspection
INFOID:0000000001326468
SNOW MODE SWITCH
Continuity should exist.
PBIB2625E
Continuity should exist.
EC-590
< SERVICE INFORMATION >
[VQ35DE]
SNOW MODE SWITCH
1.
Check continuity between snow mode switch terminals 1 and 4
under the following conditions.
If NG, replace snow mode switch.
If OK, go to following step.
2.
Check continuity between snow mode switch terminals 2 and 4
under the following conditions.
If NG, replace snow mode switch.
CONDITION
CONTINUITY
Snow mode switch: ON
Should exist.
Snow mode switch: OFF
Should not exist.
PBIB2563E
CONDITION
CONTINUITY
1
Should exist.
2
Should not exist.
PBIB2564E
MIL AND DATA LINK CONNECTOR
EC-591
< SERVICE INFORMATION >
[VQ35DE]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
MIL AND DATA LINK CONNECTOR
Wiring Diagram
INFOID:0000000001326469
TBWM1413E
EC-592
< SERVICE INFORMATION >
[VQ35DE]
MIL AND DATA LINK CONNECTOR
TBWM1414E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст