Infiniti FX35 / FX45. Manual — part 198
REMOTE KEYLESS ENTRY SYSTEM
BL-59
< SERVICE INFORMATION >
C
D
E
F
G
H
J
K
L
M
A
B
BL
N
O
P
*
1
: In the state that hazard reminder operates.
*
2
: In the state that room lamp switch is in “DOOR” position.
Terminal and Reference Value for IPDM E/R
INFOID:0000000001327819
*: In the state that horn reminder operates.
44
Y
Driver door lock actuator
(Unlock)
Output
Door lock / unlock switch
(Free
→
Unlock)
0
→
Battery voltage
45
G/W
Left turn signal lamp
Output
When door lock or unlock is operat-
ed using key fob.*
1
(ON
→
OFF)
Battery voltage
→
0
46
BR/W
Right turn signal lamp
Output
When door lock or unlock is operat-
ed using key fob.*
1
(ON
→
OFF)
Battery voltage
→
0
47
Y/R
Step lamp output signal
Output
Step lamp is lighting.
0
Step lamp is being turned off.
Battery voltage
48
PU/W
Room lamp output signal
Output
Room lamp is lighting.*
2
0
Room lamp is being turned off.*
2
Battery voltage
49
B
Ground
—
—
0
50
PU
Door lock actuator (Lock)
Output
Door lock / unlock switch
(Free
→
Lock)
0
→
Battery voltage
51
W/B
Passenger and rear doors
lock actuator (Unlock)
Output
Door lock / unlock switch
(Free
→
Unlock)
0
→
Battery voltage
52
B
Ground
—
—
0
54
W
Battery power supply
(power window)
Input
—
Battery voltage
55
G
Battery power supply (Fus-
ible link)
Input
—
Battery voltage
58
L
Back door switch
Input
OFF (Door close)
→
ON (Door
open)
9
→
0
62
W
Front door switch (Driver
side)
Input
OFF (Door close)
→
ON (Door
open)
Battery voltage
→
0
63
P
Rear door switch LH
Input
OFF (Door close)
→
ON (Door
open)
Battery voltage
→
0
Termi-
nal
Wire
Color
Item
Signal In-
put/ out-
put
Condition
Voltage (V)
Approx.
Termi-
nal
Wire
Color
Item
Signal
Input/
Output
Condition
Voltage (V)
Approx.
38
B
Ground
—
—
0
48
L
CAN H
Input/
Output
—
—
49
R
CAN L
Input/
Output
—
—
51
SB
Horn relay
Output
When door lock is operated using
key fob* (OFF
→
ON)
Battery voltage
→
0
60
B
Ground
—
—
0
BL-60
< SERVICE INFORMATION >
REMOTE KEYLESS ENTRY SYSTEM
CONSULT-III Function (BCM)
INFOID:0000000001327820
*: Refer to
LAN-43, "CAN System Specification Chart"
.
DATA MONITOR
ACTIVE TEST
BCM diagnosis
position
Inspection items and diagnosis mode
Description
BCM C/U*
Self-diagnosis results
Carries out the self-diagnosis.
DATA MONITOR
Displays the input data to BCM on real-time basis.
CAN DIAG SUPPORT MNTR
Displays CAN communication system diagnosis, disabled
transmission status, and communication status of each unit
communicated with BCM.
MULTI REMOTE
ENT
DATA MONITOR
Displays the input remote keyless entry system data to BCM on
real–time basis.
ACTIVE TEST
Gives a drive to a load to check the operation.
WORK SUPPORT
Changes the setting for each function.
Monitored Item
Description
IGN ON SW
Indicates [ON/OFF] condition of ignition switch in ON position.
KEY ON SW
Indicates [ON/OFF] condition of key switch.
ACC ON SW
Indicates [ON/OFF] condition of ignition switch in ACC position.
KEYLESS LOCK
Indicates [ON/OFF] condition of lock signal from key fob.
KEYLWSS UNLOCK
Indicates [ON/OFF] condition of unlock signal from key fob.
KEYLESS PANIC
Indicates [ON/OFF] condition of panic signal from key fob.
KEYLESS TRUNK
This is displayed even when it is not equipped.
DOOR SW-DR
Indicates [ON/OFF] condition of front door switch driver side.
DOOR SW-AS
Indicates [ON/OFF] condition of door switch passenger side.
DOOR SW-RR
Indicates [ON/OFF] condition of front door switch RH.
DOOR SW-RL
Indicates [ON/OFF] condition of door switch LH.
BACK DOOR SW
Indicates [ON/OFF] condition of back door switch.
TRUNK OPN MNTR
This is displayed even when it is not equipped.
CDL LOCK SW
Indicates [ON/OFF] condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW
Indicates [ON/OFF] condition of unlock signal from door lock and unlock switch.
RKE LCK-UNLOCK
Indicates [ON/OFF] condition of simultaneous signal of lock and unlock from key fob.
RKE KEEP UNLK
Indicates [ON/OFF] condition of unlock continuousness signal from key fob.
KEY CYL LK-SW
Indicates [ON/OFF] condition of lock signal from door key cylinder switch.
KEY CYL UN-SW
Indicates [ON/OFF] condition of unlock signal from door key cylinder switch.
Test Item
Description
FLASHER
This test is able to check right hazard reminder operation.
The right hazard lamp turns on when “ON” on CONSULT-III screen is touched.
POWER WINDOW DOWN
This test is able to check power window open operation.
The front power windows activate for 10 seconds after “ON” on CONSULT-III screen is touched.
HORN
This test is able to check panic alarm and horn reminder operations.
The horn activate for 0.5 seconds after “ON” on CONSULT-III screen is touched.
REMOTE KEYLESS ENTRY SYSTEM
BL-61
< SERVICE INFORMATION >
C
D
E
F
G
H
J
K
L
M
A
B
BL
N
O
P
WORK SUPPORT
*: Perform this mode always in the state of C mode. Refer to
.
Horn Chirp Set*
*: Perform this mode always in the state of C mode. Refer to
.
This mode can be changed also on the display.
Hazard Lamp Set*
*: Perform this mode always in the state of C mode. Refer to
.
This mode can be changed also on the display.
Multi Answer Back Set
Auto Lock Set
Panic Alarm Set
DOOR LOCK
This test is able to check door lock actuator operation.
• The all door lock actuator are locked when “ALL LOCK” on CONSULT-III screen is touched.
• The all door lock actuator are unlocked when “ALL UNLOCK” on CONSULT-III screen is touched.
• The door lock actuator (driver side) is unlocked when “DR UNLOCK” on CONSULT-III screen is
touched.
• The all door lock actuator (except driver side) are unlocked when “OTHER UNLOCK” on CONSULT-
III screen is touched.
TRUNK/BACK DOOR
This is displayed even when it is not equipped.
Test Item
Description
Test Item
Description
HORN CHIRP SET*
Horn reminder mode can be changed in this mode. The horn reminder mode will be changed
when “CHANGE SETT” on CONSULT-III screen is touched.
HAZARD LAMP SET*
Hazard reminder mode can be changed in this mode. The hazard reminder mode will be
changed when “CHANGE SETT” on CONSULT-III screen is touched.
MULTI ANSWER BACK SET
Hazard and horn reminder mode can be changed in this mode. The hazard and horn remind-
er mode will be changed when “CHANGE SETT” on CONSULT-III screen is touched.
AUTO LOCK SET
Auto locking function mode can be changed in this mode. The function mode will be changed
when “CHANGE SETT” on CONSULT-III screen is touched.
PANIC ALRM SET
Panic alarm operation mode can be changed in this mode. The operation mode will be
changed when “CHANGE SETT” on CONSULT-III screen is touched.
PW DOWN SET
Keyless power window down (open) operation mode can be changed in this mode. The op-
eration mode will be changed when“CHANGE SETT” on CONSULT-III screen is touched.
Horn chirp function
ON
OFF
MODE1
MODE2
MODE3
MODE4
Hazard lamp operation mode
Nothing
Unlock only
Lock only
Lock and Unlock
MODE 1
(C mode)
MODE 2
(S mode)
Key fob operation
Lock
Unlock
Lock
Unlock
Hazard warning lamp flash
Twice
Once
Twice
—
Horn sound
Once
—
—
—
MODE 1
MODE 2
MODE 3
Auto locking function
1 minutes
Nothing
5 minutes
MODE 1
MODE 2
MODE 3
Key fob operation
0.5 seconds
Nothing
1.5 seconds
BL-62
< SERVICE INFORMATION >
REMOTE KEYLESS ENTRY SYSTEM
PW Down Set
Work Flow
INFOID:0000000001327821
1.
Check the symptom and customer's requests.
2.
Understand outline of system. Refer to
.
3.
Confirm that power door lock system operates normally.
Refer to
.
4.
Repair or replace any malfunctioning parts.
Refer to
BL-62, "Trouble Diagnosis Chart by Symptom"
.
5.
INSPECTION END
Trouble Diagnosis Chart by Symptom
INFOID:0000000001327822
NOTE:
• Always check the “Work Flow” before troubleshooting. Refer to
.
• Always check key fob battery before replacing key fob.
MODE 1
MODE 2
MODE 3
Key fob operation
3 seconds
Nothing
5 seconds
Symptom
Diagnoses/service procedure
Reference
page
All function of remote keyless entry system do not
operate.
1. Check key fob battery and function.
2. Replace key fob. Refer to ID Code Entry Procedure.
NOTE:
If the result of key fob function check with CONSULT-III is OK, key
fob is not malfunctioning.
3. Check remote keyless entry receiver.
4. Replace BCM.
The new ID of key fob cannot be entered.
1. Check key fob battery and function.
2. Check key switch.
3. Check door switch.
4. Check ACC switch.
5. Replace key fob. Refer to ID Code Entry Procedure.
NOTE:
If the result of key fob function check with CONSULT-III is OK, key
fob is not malfunctioning.
6. Replace BCM.
Door lock or unlock does not function with key fob.
(Power door lock system is “OK”.)
1. Check key fob battery and function.
2. Replace key fob. Refer to ID Code Entry Procedure.
NOTE:
If the result of key fob function check with CONSULT-III is OK, key
fob is not malfunctioning.
3. Replace BCM.
Hazard and horn reminder does not activate properly
when pressing lock or unlock button of key fob.
1. Check hazard and horn reminder mode.*
*: Hazard and horn reminder mode can be changed.
First check the hazard and horn reminder setting.
2. Check door switch.
3. Replace BCM.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст