Infiniti FX35 / FX45. Manual — part 175
AV-154
< SERVICE INFORMATION >
INFINITI MOBILE ENTERTAINMENT SYSTEM
1.
Turn ignition switch ACC.
2.
Press “POWER” switch of DVD player and operate DVD player switch.
Dose the DVD player switches work?
YES
>> Replace remote controller.
NO
>> GO TO 2.
2.
CHECK REMOTE CONTROLLER AND SENSOR
Check the inspection items below to diagnose the malfunction.
• Check that remote controller is facing to the sensor.
• Check that sensor does not have any seals or dirt that is interrupt-
ing signal.
• Check that the remote controller battery has run down.
OK or NG
OK
>> GO TO 3.
NG
>> • When operating, face remote controller to the sensor.
• Remove seal or dirt that is interrupting signal.
• If the battery has run down, replace it with new one.
3.
CHECK HARNESS
1.
Turn ignition switch OFF.
2.
Disconnect DVD player and DVD display connectors.
3.
Check continuity between DVD player harness connector B19
terminal 30 and DVD display harness connector B61 terminal
14.
4.
Check continuity between DVD player harness connector B19
terminal 30 (BR) and ground.
OK or NG
OK
>> GO TO 4.
NG
>> Repair harness or connector.
4.
CHECK DATA (LCD – DVD) SIGNAL
1.
Connect DVD display connector.
2.
Turn ignition switch ACC.
3.
Check the signal between DVD player harness connector B19
terminal 30 and ground.
OK or NG
OK
>> Replace DVD player.
NG
>> Replace DVD display.
No CD·DVD Sound from All Speakers
INFOID:0000000001328786
1.
VERIFY THE PHENOMENON
1.
Turn ignition switch ACC.
2.
Turn on the radio, receive radio program, check that the sound is heard from all the speakers.
SKIA5855E
30 – 14
: Continuity should exist.
30 – Ground
: Continuity should not exist.
SKIB0335E
30 – Ground:
SKIA7043E
SKIA5832E
INFINITI MOBILE ENTERTAINMENT SYSTEM
AV-155
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
M
A
B
AV
N
O
P
OK or NG
OK
>> GO TO 2.
NG
>> Replace audio unit.
2.
CHECK A/C AND AV SWITCH SELF-DIAGNOSIS
A/C and AV switch self-diagnosis. Check “REAR AV” switch. Refer to
AV-78, "A/C and AV Switch Self-Diagno-
.
OK or NG
OK
>> GO TO 3.
NG
>> Replace A/C and AV switch.
3.
CHECK HARNESS
1.
Turn ignition switch OFF.
2.
Disconnect DVD player and audio unit connectors.
3.
Check continuity between DVD player harness connector M73
terminals 1, 2, 3, 4 and audio unit harness connector M65 termi-
nals 37, 39, 43, 42.
4.
Check continuity between DVD player harness connector M73
terminals 1, 2, 3, 4 and ground.
OK or NG
OK
>> GO TO 4.
NG
>> Repair harness or connector.
4.
CHECK MES SOUND SIGNAL
1.
Connect DVD player and audio unit connectors.
2.
Turn ignition switch ACC and Press “POWER” switch of DVD player.
3.
Check the signal between DVD player harness connector M73
terminals 1 and 2, 3 and 4 with CONSULT-III or oscilloscope.
OK or NG
OK
>> Replace audio unit.
NG
>> Replace DVD player.
Removal and Installation for DVD Player
INFOID:0000000001328787
REMOVAL
1.
Remove center console. Refer to
.
2.
Remove center console rear finisher. Refer to
IP-11, "Removal and Installation"
.
1 – 37
: Continuity should exist.
2 – 39
: Continuity should exist.
3 – 43
: Continuity should exist.
4 – 42
: Continuity should exist.
1, 2, 3, 4 – Ground
: Continuity should not exist.
SKIA7034E
Terminal
Condition
Reference value
(+)
(–)
1
2
Play CD or DVD video.
3
4
SKIA7035E
SKIA8863J
AV-156
< SERVICE INFORMATION >
INFINITI MOBILE ENTERTAINMENT SYSTEM
3.
Remove screws (2) with power tool and remove DVD player.
4.
Remove screws (4) with power tool and remove brackets.
INSTALLATION
Installation is the reverse order of removal.
Removal and Installation for DVD Display Unit
INFOID:0000000001328788
REMOVAL
1.
Insert cloth-covered driver into gaps between rear display cover
and head lining, and remove rear display cover.
2.
Press pawl on rear side and remove inner cover.
SKIA5810E
SKIA5811E
SKIA5812E
SKIA5813E
INFINITI MOBILE ENTERTAINMENT SYSTEM
AV-157
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
M
A
B
AV
N
O
P
3.
Remove screws (4) with power tool.
4.
Pull DVD display unit to downside, and remove rear display unit
from mounting plate.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
Put metal clip hook in mounting plate, and press it securely.
SKIA5814E
SKIA5815E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст