Infiniti FX35 / FX45. Manual — part 130
ATC-116
< SERVICE INFORMATION >
DUCTS AND GRILLES
DUCTS AND GRILLES
Removal and Installation
INFOID:0000000001328216
COMPONENT LAYOUT
REMOVAL
Removal of Center Ventilator Grilles
1.
Remove cluster lid C. Refer to
.
2.
Remove mounting screws, and then remove center ventilator
grilles.
Removal of Side Ventilation
Remove side ventilation. Refer to
.
Removal of Rear Ventilator Grilles
1.
Remove center pillar lower garnish. Refer to
.
1.
Defroster nozzle
2.
Side defroster duct (left)
3.
Side ventilator duct (left)
4.
Instrument panel
5.
Side ventilation (left)
6.
Center ventilator grille (left)
7.
Center ventilator grille (right)
8.
Side ventilation (right)
9.
Center ventilator duct (right)
10. Side ventilator duct (right)
11. Side defroster duct (right)
12. Center ventilator duct
13. Center ventilator duct (left)
PJIA0166E
RJIA2048E
DUCTS AND GRILLES
ATC-117
< SERVICE INFORMATION >
C
D
E
F
G
H
I
K
L
M
A
B
ATC
N
O
P
2.
Remove mounting clips, and then remove rear ventilator grilles.
Removal of Defroster Nozzle, Ducts and Ventilator Ducts
1.
Remove instrument panel and pad. Refer to
2.
Remove mounting screws, and then remove side defroster ducts.
3.
Remove mounting screws, and then remove defroster nozzle.
4.
Remove mounting screws, and then remove side ventilator ducts (right and left).
5.
Remove mounting screws, and then remove center ventilator duct.
Removal of Rear Ventilator Ducts
1.
Remove center console. Refer to
.
2.
Slide rear ventilator duct 2 toward vehicle front, and then remove it.
3.
Remove floor carpet. Refer to
RJIA2050E
RJIA2051E
SJIA1227E
ATC-118
< SERVICE INFORMATION >
DUCTS AND GRILLES
4.
Remove mounting clips, and then remove rear ventilator duct 3.
5.
Remove instrument panel and pad. Refer to
.
6.
Remove rear ventilator duct 1 with center floor duct attached.
7.
Remove rear ventilator duct 1 from center floor duct.
Removal of Foot Ducts
1.
Remove heater & cooling unit assembly. Refer to
.
2.
Remove mounting screws, and then remove air mix door motor
(right), mode door motor, evaporator cover and foot duct (right).
3.
Remove foot duct (left).
Removal of Floor Ducts
1.
Remove floor carpet. Refer to
2.
Remove mounting clips, and then remove side floor ducts.
3.
Remove instrument panel and pad. Refer to
.
RJIA2053E
RJIA2054E
RJIA0962E
RJIA2055E
DUCTS AND GRILLES
ATC-119
< SERVICE INFORMATION >
C
D
E
F
G
H
I
K
L
M
A
B
ATC
N
O
P
4.
Remove mounting clip, and then remove center floor duct with
rear ventilator duct 1 attached.
5.
Remove center floor duct from rear ventilator duct 1.
INSTALLATION
Installation is basically the reverse order of removal.
RJIA2054E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст