Infiniti QX50/EX (2017 year). Manual — part 19
(298,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-128
Monitor, climate, audio, phone and voice recognition systems
completed.
Selecting the “Help” key can display
the detailed information of the each
command.
Operating tips:
.
Say a command after the tone.
.
Commands that are available are al-
ways shown on the display and spoken
through voice menu prompts. Com-
mands other than those that are
displayed are not accepted. Please
follow the prompts given by the sys-
tem.
.
If the command is not recognized, the
system announces, “Please say again”.
Repeat the command in a clear voice.
.
Push the BACK button once to return to
the previous screen.
.
To exit the voice recognition system,
push and hold the TALK
switch. The
message, “Voice canceled” will be
announced.
Voice Prompt Interrupt:
To skip the voice guidance function and
give the command immediately, press the
TALK
switch to interrupt the system.
Remember to speak after the tone.
How to speak numbers:
INFINITI Voice Recognition requires a cer-
tain way to speak numbers when giving
voice commands. Refer to the following
examples.
General rule
Only single digits 0 (zero) to 9 can be used.
(For example, if you would like to say 500,
“five zero zero” can be used, but “five
hundred” cannot.)
Examples
.
1-800-662-6200
— “One eight zero zero six six two six
two zero zero”
Improving Recognition of Phone numbers
You can improve the recognition of phone
numbers by saying the phone number in
three groups of numbers. For example,
when you try to call 800-662-6200, say
“eight zero zero” first, and the system will
then ask you for the next three digits. Then,
say “six six two”. After recognition, the
system will then ask for the last four digits.
Say, “six two zero zero”. Using this method
of phone digit entry can improve recogni-
tion performance.
When speaking a house number, speak the
number “0” as “zero”. If the letter “o (Oh)”
is included in the house number, it will not
be recognized as the number “0 (zero)”
even if you speak “oh” instead of “zero”.
Please speak “zero” for the number “0
(zero)”, “oh” for the letter “o (oh)”
Send digits using dial tone:
.
Press the TALK
switch during a
phone call.
.
The menu will be launched and you will
be provided with the following gui-
dance: "Please say the digits to dial".
.
After guidance, say the digits of the
number you want to send. After this,
the digits that have been recognized
will be read out.
.
If you press the ENTER button on the
steering wheel or on the INFINITI con-
troller, the selected digits will be sent.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(299,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
Command List
Category Command:
Command
Action
Call (Optional)
Makes a call to a contact that is stored in either phonebook. Please say "Call" followed by a stored name.
Phone
Operates the Phone function
Navigation
Operates the Navigation function
Information
Displays the vehicle Information function
Audio
Operates the Audio function.
Help
Displays User Guide
.
Phone Command:
Command
Action
Dial Number
Makes a call to a spoken phone number up to 10 digits.
Quick Dial
Makes a call to a contact that is stored in the Quick Dial.
Phonebook
Makes a call to a contact that is stored in the mobile phone.
Call history
Incoming Calls
Makes a call to the incoming call number.
Outgoing Calls
Makes a call to the dialed number.
Missed Calls
Makes a call to the Missed calls number.
International Call
Makes an international call by allowing more than 10 digits to be spoken.
Change Number
Corrects the recognized phone number (available during phone number entry).
Monitor, climate, audio, phone and voice recognition systems
4-129
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(300,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-130
Monitor, climate, audio, phone and voice recognition systems
.
Navigation Command:
Command
Action
Destination Home
Sets a route to your home that is stored in the Address Book.
Address
Searches for a location by the street address specified, and sets a route to the location.
Places
Sets a route to a facility near the current vehicle location.
Address Book
Searches for stored information in the Address Book.
Previous Destinations
Sets a route to a previous destination.
.
Information Command:
Command
Action
Fuel Economy
Displays fuel economy information.
Maintenance
Displays maintenance information.
Traffic Information
Displays the [Info On Route] screen when a route to the destination is set.
Displays the [Nearby Traffic Info.] screen when a route to the destination is not set.
Where am I?
Displays your current location.
.
Audio Command:
Command
Action
AM
Turns to the AM band, selecting the station last played.
FM
Turns to the FM band, selecting the station last played.
XM
Turns to the SiriusXM Satellite Radio band, selecting the channel last played.
CD
Starts to play a CD.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(301,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
.
General Commands
Command
Action
Go back
Corrects the last recognition result to return to the previous screen
Exit
Cancels Voice Recognition
Monitor, climate, audio, phone and voice recognition systems
4-131
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(302,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-132
Monitor, climate, audio, phone and voice recognition systems
Voice command examples
To use the INFINITI Voice Recognition
function, speaking one command is some-
times sufficient, but at other times it is
necessary to speak two or more com-
mands. As examples, some additional
basic operations by voice commands are
described here.
For navigation system commands, see the
separate Navigation System Owner’s Man-
ual.
SAA1588
Example 1 - Placing a call to the phone
number 800-662-6200:
1. Push the TALK
switch located on
the steering wheel. You will hear a
prompt.
2. Speak “Phone”.
JVH0481X
3. Speak “Dial Number”.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(303,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
SAA2537
4. Speak “8 0 0”.
Selecting the “Manual Controls” key
switches the screen to the keypad to
input the phone number manually.
SAA2538
5. The system announces, “Please say the
next three digits or dial, or say change
number.”
6. Speak “6 6 2”.
SAA2539
7. The system announces, “Please say the
last four digits” or say change number.
8. Speak “6 2 0 0”.
Monitor, climate, audio, phone and voice recognition systems
4-133
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(304,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-134
Monitor, climate, audio, phone and voice recognition systems
SAA2540
9. The system announces, “Dial or Change
Number?”
10.Speak “Dial”.
11.The system makes a call to 800-662-
6200.
NOTE:
.
You can also speak “800-662-6200”
(10 continuous digits) or “662-6200”
(7 continuous digits), if the area code is
not necessary. However, the 3-3-4 digit
grouping is recommended for improved
recognition. (See “How to speak num-
bers” earlier in this section.)
.
You can only say a phone number using
the 3-3-4 grouping, 7 digits, and 10
digits using this command. Please use
the “International Call” command for
all other formats.
.
If you say “Change Number” during
phone number entry, the system will
automatically request that you repeat
the number using the 3-3-4 format. In
this case please say the area code first
and then follow the prompts.
.
Do not add a “1” in front of the area
code when speaking phone numbers.
.
If the system does not recognize your
command, please try repeating the
command using a natural voice. Speak-
ing too slow or too loudly may further
decrease recognition performance.
SAA1588
Example 2 - Placing an international call to
the phone number 011-81-111-222-3333:
1. Push the TALK
switch located on
the steering wheel. You will hear a
prompt.
2. Speak “Phone”.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(305,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
JVH0481X
3. Speak “International Call”.
SAA2541
4. Speak “011811112223333”.
SAA2542
5. Speak “Dial”.
6. System makes a call to 011-81-111-
222-3333.
NOTE:
Any digit input format is available in the
International Number input process.
Monitor, climate, audio, phone and voice recognition systems
4-135
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(306,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-136
Monitor, climate, audio, phone and voice recognition systems
INFINITI VOICE RECOGNITION AL-
TERNATE COMMAND MODE
The following section is applicable when
Alternate Command Mode is activated.
When Alternate Command Mode is acti-
vated, an expanded list of commands can
be used after pressing the TALK
switch.
In this mode, available commands are not
fully shown on the display or prompted.
Review the expanded command list when
this mode is active. See examples of
Alternate Command Mode screens.
Please note that in this mode the recogni-
tion success rate may be affected as the
number of available commands and ways
of speaking each command are increased.
To improve the recognition success rate,
try using the Speaker Adaptation Function
available in that mode. (See “Speaker
adaptation function (for Alternate Com-
mand Mode)” (P.4-146).) Otherwise it is
recommended that Alternate Command
Mode be turned OFF and Standard Mode
be used for the best recognition perfor-
mance.
Activating Alternate Command
Mode
When the Standard Mode is active, perform
the following steps to switch to the
Alternate Command Mode.
1. Push the SETTING button on the instru-
ment panel.
2. Highlight the “Others” key.
3. Highlight the “Voice Recognition” key.
SAA2543
4. Highlight the “Alternate Command
Mode” key.
5. The confirmation message is displayed
on the screen. Push the “OK” key to
activate the Alternate Command Mode.
Displaying command list
If you are controlling the system by voice
commands for the first time or do not know
the appropriate voice command, perform
the following procedure for displaying the
voice command list (available only in
Alternate Command Mode).
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(307,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
SAA2544
1. Push the INFO button on the instrument
panel.
2. Select the “Others” key.
3. Select the “Voice Recognition” key.
4. Select the “Command List” key.
SAA2545
5. Select a category from the list.
JVH0483X
6. Select an item.
7. If necessary, scroll the screen using the
INFINITI controller to view the entire
list.
8. Press the BACK button to return to the
previous screen.
Monitor, climate, audio, phone and voice recognition systems
4-137
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(308,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-138
Monitor, climate, audio, phone and voice recognition systems
Command List
Phone Commands:
Command
Action
Dial Number
Makes a call to a spoken phone number.
Quick Dial
Makes a call to a contact that is stored in the Quick Dial.
Phonebook
Makes a call to a contact that is stored in the mobile phone.
Call History
Incoming Calls
Makes a call to the incoming call number.
Outgoing Calls
Makes a call to the dialed number.
Missed Calls
Makes a call to the Missed calls number.
International Call
Makes an international call by allowing more than 10 digits to be spoken.
Call <name>
Makes a call to a contact that is stored in either Quick Dial or Phonebook. Please say “Call” followed by a stored name.
Change Number
Corrects the recognized phone number (available during phone number entry).
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(309,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
Navigation Commands:
Command
Action
Destination Home
Sets a route to your home that is stored in the Address Book.
Address
Searches for a location by the street address specified, and sets a route to the location.
Places
Sets a route to a facility near the current vehicle location.
Address Book
Searches for stored information in the Address Book.
Previous Destinations
Sets a route to a previous destination.
Previous Start Point
Sets a route to a previous starting point.
Delete Destination
Deletes a destination.
Monitor, climate, audio, phone and voice recognition systems
4-139
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(310,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-140
Monitor, climate, audio, phone and voice recognition systems
Information Commands:
Command
Action
Fuel Economy
Displays fuel economy information.
Maintenance
Displays maintenance information.
Where am I?
Displays your current location.
Traffic Information
Displays the [Info On Route] screen when a route to the destination is set.
Displays the [Nearby Traffic Info.] screen when a route to the destination is not set.
Weather Information
Displays weather information.
Weather Map
Displays a weather map.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(311,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
Audio Commands:
Command
Action
CD
Starts to play a CD.
FM
Turns to the FM band, selecting the station last played.
AM
Turns to the AM band, selecting the station last played.
XM
Turns to the SiriusXM Satellite Radio band, selecting the channel last played.
USB
Turns on the USB memory.
Bluetooth
®
Audio
Turns on the Bluetooth
®
audio player.
Monitor, climate, audio, phone and voice recognition systems
4-141
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(312,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-142
Monitor, climate, audio, phone and voice recognition systems
Help Commands:
Command
Action
Command List
Navigation Commands Displays the navigation command list.
Phone Commands
Displays the phone command list.
Audio Commands
Displays the audio command list.
Information Com-
mands
Displays the information command list.
Help Commands
Displays the help command list.
User Guide
Displays the User Guide.
Speaker Adaptation
The system can memorize the voices of up to three persons.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(313,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
General Commands:
Command
Action
Go back
Corrects the last recognition result to return to the previous screen
Exit
Cancels Voice Recognition
Monitor, climate, audio, phone and voice recognition systems
4-143
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст