Infiniti QX50/EX (2017 year). Manual — part 14
(218,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-48
Monitor, climate, audio, phone and voice recognition systems
objects surrounding the vehicle. When
maneuvering, always use the outside
mirror and rearview mirror and turn and
check the surrounding to ensure it is
safe to maneuver.
.
The system is deactivated at speeds
above 6 MPH (10 km/h). It is reactivated
at lower speeds.
.
The MOD system is not designed to
detect the surrounding stationary ob-
jects.
The Moving Object Detection (MOD) system
can inform the driver of the moving objects
surrounding the vehicle when driving out
of garages, maneuvering into parking lots
and in other such instances.
The MOD system detects moving objects by
using image processing technology on the
image shown on the display.
MOD SYSTEM OPERATION
The MOD system will turn on automatically
under the following conditions:
.
When the shift lever is in the “R”
(Reverse) position.
.
When the CAMERA button is pushed to
activate the camera view on the dis-
play.
.
When vehicle speed decreases below
approximately 5 MPH (8 km/h) and the
camera screen is displayed.
.
When the ignition switch is placed in
the OFF position and then back to the
ON position.
When the MOD system turns on, the MOD
icon is displayed.
JVH1146X
Bird’s-eye view
JVH1147X
Front view / rear view
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(219,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
JVH1148X
Front-wide view / rear-wide view
When the MOD system detects moving
objects near the vehicle, the yellow frame
will be displayed on the view where the
objects are detected and a chime will
sound once. While the MOD system con-
tinues to detect moving objects, the yellow
frame continues to be displayed.
In the bird’s-eye view, the yellow frame
*
1
is displayed on each camera image (front,
rear, right, left) depending on where
moving objects are detected.
The yellow frame
*
2
is displayed on each
view in the front view, front-wide view, rear
view and rear-wide view modes.
While the sonar is beeping, the MOD
system does not chime.
A blue MOD icon
*
3
is displayed in the
view where the MOD system is operative. A
gray MOD icon
*
3
is displayed in the view
where the MOD system is not operative.
If the MOD system is turned off, the MOD
icon
*
3
is not displayed.
The MOD system operates in the following
conditions when the camera view is dis-
played:
.
When the shift lever is in the “P” (Park)
or “N” (Neutral) position and the
vehicle is stopped, the MOD system
detects the moving objects in the
bird’s-eye view. The MOD system will
not operate if the outside mirror is
moving in or out or if either door is
opened.
.
When the shift lever is in the “D” (Drive)
position and the vehicle speed is below
approximately 5 MPH (8 km/h), the
MOD system detects moving objects in
the front view or front-wide view.
.
When the shift lever is in the “R”
(Reverse) position and the vehicle
speed is below approximately 5 MPH
(8 km/h), the MOD system detects
moving objects in the rear view or
rear-wide view. The MOD system will
not operate if the liftgate is open.
The MOD system does not detect moving
objects in the front-side view. The MOD
icon is not displayed on the screen when in
this view.
Monitor, climate, audio, phone and voice recognition systems
4-49
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(220,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-50
Monitor, climate, audio, phone and voice recognition systems
JVH1149X
TURNING ON AND OFF THE MOD
SYSTEM
When the MOD is active and the “
”
*
1
is selected, the MOD system will turn off
temporarily and the indicator
*
2
will turn
off. (A camera-aiding sonar will turn off at
the same time.) When the “
”
*
1
is
selected again, the indicator will turn on
and the MOD system will turn back on.
To enable or disable the MOD, use the
“Camera” menu. See “MOD function
setting” (P.4-50).
MOD function setting
To activate or deactivate the MOD function,
push the SETTING button, select “Others”
key, select the “Camera” key on the center
display, and then select the “Moving
Object Detection (MOD)” key.
JVH0269X
When this item is turned on, the MOD is
activated. When this item is turned off
(indicator turns off), the MOD system is
deactivated. When the MOD system is
deactivated, “MOD”
*
2
will disappear on
the
*
3
and the MOD icon
*
1
will
disappear as well. When the sonar is
turned off on the setting menu as well,
the
*
3
will disappear.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(221,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
MOD SYSTEM LIMITATIONS
WARNING
.
Excessive noise (for example, audio
system volume or open vehicle window)
will interfere with the chime sound, and
it may not be heard.
.
The MOD system performance will be
limited according to environmental con-
ditions and surrounding objects such as:
— When there is low contrast between
background and the moving objects.
— When there is blinking source of
light.
— When strong light such as another
vehicle’s headlight or sunlight is
present.
— When camera orientation is not in
its usual position, such as when
mirror is folded.
— When there is dirt, water drops or
snow on the camera lens.
— When the position of the moving
objects in the display is not changed.
.
The MOD system might detect flowing
water droplets on the camera lens, white
smoke from the muffler, moving sha-
dows, etc.
.
The MOD system may not function
properly depending on the speed, direc-
tion, distance or shape of the moving
objects.
.
If your vehicle sustains damage to the
parts where the camera is installed,
leaving it misaligned or bent, the sen-
sing zone may be altered and the MOD
system may not detect objects properly.
.
When the temperature is extremely high
or low, the screen may not display
objects clearly. This is not a malfunction.
JVH1138X
SYSTEM MAINTENANCE
CAUTION
.
Do not use alcohol, benzine or thinner to
clean the camera. This will cause dis-
coloration. To clean the camera, wipe
with a cloth dampened with diluted mild
cleaning agent and then wipe with a dry
cloth.
.
Do not damage the camera as the
monitor screen may be adversely af-
fected.
Monitor, climate, audio, phone and voice recognition systems
4-51
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(222,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-52
Monitor, climate, audio, phone and voice recognition systems
If dirt, rain or snow accumulates on any of
the cameras
*
1
, the MOD system may not
operate properly. Clean the camera by
wiping with a cloth dampened with a
diluted mild cleaning agent and then
wiping with a dry cloth.
SAA1981
Center ventilators
SAA1982
Side ventilators
SAA0564B
Rear
Open or close, and adjust the air flow
direction of ventilators.
: This symbol indicates that the vents are
closed.
: This symbol indicates that the vents are open.
VENTILATORS
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(223,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
WARNING
.
The air conditioner cooling function
operates only when the engine is run-
ning.
.
Do not leave children or adults who
would normally require the support of
others alone in your vehicle. Pets should
not be left alone either. On hot, sunny
days, temperatures in a closed vehicle
could quickly become high enough to
cause severe or possibly fatal injuries to
people or animals.
.
Do not use the recirculation mode for
long periods as it may cause the interior
air to become stale and the windows to
fog up.
Start the engine and operate the automatic
climate control system.
NOTE:
.
Odors from inside and outside the
vehicle can build up in the air condi-
tioner unit. Odor can enter the passen-
ger compartment through the vents.
.
When parking, set the heater and air
conditioner controls to turn off air
recirculation to allow fresh air into
the passenger compartment. This
should help reduce odors inside the
vehicle.
When the “STATUS” button is pushed, the
automatic climate control status screen
will appear. (See “How to use STATUS
button” (P.4-9).)
SAA2723
Models with navigation system
SAA1520
Models without navigation system
Monitor, climate, audio, phone and voice recognition systems
4-53
HEATER AND AIR CONDITIONER
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(224,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-54
Monitor, climate, audio, phone and voice recognition systems
You can individually set the driver and front
passenger side temperature using each
temperature control button.
SAA1527
Type A (if so equipped)
1.
“AUTO” automatic climate control ON
button/Temperature control dial (dri-
ver side)
2.
“A/C” air conditioner ON/OFF button
3.
“
” fan speed increase button
4.
“
” front defroster button
5.
“MODE” manual air flow control but-
ton
6.
“DUAL” zone control ON/OFF button/
Temperature control dial (passenger
side)
7.
“OFF” button for climate control sys-
tem
8.
“
” fan speed decrease button
9.
“
” rear window defroster button
(See “Rear window and outside mirror
defroster switch” (P.2-33).)
10. “
” intake air control button
AUTOMATIC CLIMATE CONTROL
(Type A) (if so equipped)
Automatic operation
Cooling and/or dehumidified heating
(AUTO):
This mode may be used all year round. The
system works automatically to control the
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(225,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
inside temperature, air flow distribution
and fan speed after the preferred tempera-
ture is set manually.
1. Push the “AUTO” button on. (The
indicator on the button will illuminate
and AUTO will be displayed.)
2. Turn the temperature control dial (dri-
ver side) to set the desired tempera-
ture.
.
The temperature can be set within
the following range.
— For U.S.: 60 to 908F
— For Canada: 18 to 328C
.
The temperature of the passenger
compartment will be maintained
automatically. Air flow distribution
and fan speed will also be controlled
automatically.
3. You can individually set driver and front
passenger side temperature using each
temperature control button. When the
“DUAL” button is pushed or the pas-
senger side temperature control button
is turned, the DUAL indicator will come
on. To turn off the passenger side
temperature control, push the “DUAL”
button.
4. To turn off the climate control system,
push the “OFF” button.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the
air is cooled rapidly. This does not indicate
a malfunction.
Dehumidified defrosting or defogging:
1. Push the “
” front defroster button.
(The indicator light on the button will
come on.)
2. Turn the temperature control dial to set
the desired temperature.
.
To quickly remove ice from the outside
of the windows, push the fan speed
increase button “
” and set it to the
maximum position.
.
As soon as possible after the wind-
shield is clean, push the “AUTO” button
to return to the auto mode.
.
When the “
” front defroster button
is pushed, the air conditioner will
automatically be turned on at outside
temperatures above 238F (−58C) to
defog the windshield, and the air
recirculate mode will automatically be
turned off. Outside air is drawn into the
passenger compartment to improve the
defogging performance.
Manual operation
Fan speed control:
Push the fan speed increase “
” or
decrease “
” buttons to manually con-
trol the fan speed.
Push the “AUTO” button to return to
automatic control of the fan speed.
Air flow control:
Push the “MODE” button to change the air
flow mode.
: Air flows from center and side ventilators.
: Air flows from center and side ventilators and
foot outlets.
: Air flows mainly from foot outlets.
: Air flows from defroster and foot outlets.
Temperature control:
Turn the temperature control dial to set the
desired temperature.
.
The temperature can be set within the
following range.
— For U.S.: 60 to 908F
— For Canada: 18 to 328C
Air intake control:
.
Push the intake air control button “
” to recirculate interior air inside
the vehicle. The indicator light on the
Monitor, climate, audio, phone and voice recognition systems
4-55
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(226,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-56
Monitor, climate, audio, phone and voice recognition systems
“
” side will come on.
The air recirculation mode cannot be
activated when the air conditioner is in
the front defrosting mode “
”.
.
Push the intake air control button “
” to draw outside air into the
passenger compartment. The indicator
light on the “
” side will come on.
.
To control the air intake mode auto-
matically, push the intake air control
button “
” for about 2 seconds.
The indicator lights (both air recircula-
tion and outside air circulation sides)
will flash twice, and then the intake air
will be controlled automatically.
To turn system off
Push the OFF button.
SAA3568
Type B (if so equipped)
1.
“AUTO” automatic climate control ON
button/Temperature control dial (dri-
ver side)
2.
“A/C” air conditioner ON/OFF button
3.
“
” fan speed increase button
4.
“
” front defroster button
5.
“MODE” manual air flow control but-
ton
6.
“DUAL” zone control ON/OFF button/
Temperature control dial (passenger
side)
7.
“OFF” button for climate control sys-
tem*
8.
“
” fan speed decrease button
9.
“
” rear window defroster button
(See “Rear window and outside mirror
defroster switch” (P.2-33).)
10. “
” auto-recirculation button/
intake air control button
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(227,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
AUTOMATIC CLIMATE CONTROL
(Type B) (if so equipped)
Automatic operation (AUTO)
The AUTO mode may be used year-round as
the system automatically controls constant
temperature, air flow distribution and fan
speed after the desired temperature is set
manually.
To turn off the heater and air conditioner,
push the “OFF” button.
Cooling and dehumidified heating:
1. Push the “AUTO” button.
(The AUTO indicator light will illuminate
and “AUTO” will appear on the display.)
2. If the A/C indicator light does not
illuminate, push the “A/C” button.
(The A/C indicator light will illuminate.)
3. Turn the temperature control dial (dri-
ver’s side) to set the desired tempera-
ture.
.
The temperature can be set within
the following range.
— For U.S.: 60 to 908F
— For Canada: 18 to 328C
.
When the DUAL indicator light is
turned off:
— Turning the driver’s side tempera-
ture control dial changes both the
driver’s and front passenger’s
side temperature.
— Turning the passenger’s side
temperature control dial changes
only the front passenger’s side
temperature. (The DUAL indicator
light will illuminate and “DUAL”
will appear on the display.)
.
To set separate desired tempera-
tures for the driver and front pas-
senger, push the “DUAL” button, the
indicator light illuminates, and then
turn the corresponding temperature
control dial.
.
To cancel the separate temperature
setting, push the “DUAL” button, the
indicator light turns off, and the
driver’s side temperature setting will
be applied to both the driver’s and
front passenger’s sides.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the
air is cooled rapidly. This does not indicate
a malfunction.
Dehumidified defrosting/defogging:
1. Push the “
” button. (The indicator
light will illuminate.)
2. Turn the temperature control dial to set
the desired temperature.
.
To remove frost from the outside
surface of the windshield quickly,
set the temperature control and fan
speed control to their maximum
position.
.
After the windshield is cleared, push
the “AUTO” button to set to the
automatic mode.
.
When the “
” button is pushed,
the air conditioner will automatically
turn on when the outside air tem-
perature is above 238F (−58C) to
defog the windshield. The air recir-
culation mode will automatically
turn off. The outside air circulation
mode will be selected to improve the
defogging performance.
Manual operation
The manual mode can be used to control
the heater and air conditioner to your
desired settings.
To turn off the heater and air conditioner,
push the “OFF” button.
Monitor, climate, audio, phone and voice recognition systems
4-57
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(228,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-58
Monitor, climate, audio, phone and voice recognition systems
Fan speed control:
Push the fan speed increase “
” or
decrease “
” buttons to manually con-
trol the fan speed.
Push the “AUTO” button to change the fan
speed to the automatic mode.
Air flow control:
Push the “MODE” button to change the air
flow mode.
: Air flows from center and side ventilators.
: Air flows from center and side ventilators and
foot outlets.
: Air flows mainly from foot outlets.
: Air flows from defroster and foot outlets.
Temperature control:
Turn the temperature control dial to set the
desired temperature.
.
The temperature can be set within the
following range.
— For U.S.: 60 to 908F
— For Canada: 18 to 328C
Air intake control:
.
Push the intake air control button “
” to recirculate interior air inside
the vehicle. The indicator light on the
“
” side will illuminate.
The air recirculation mode cannot be
activated when the air conditioner is in
the front defrosting mode “
”.
.
Push the intake air control button “
” to draw outside air into the
passenger compartment.
The indicator light on the “
” side
and “
” side will turn off.
.
To control the air intake mode auto-
matically, push the air intake control
button “
” repeatedly until the
indicator light on the “
” side
illuminates. The advanced climate con-
trol system turns on and the air intake
will be controlled automatically.
To turn system off
Push the OFF button.
Advanced climate control system
The advanced climate control system
keeps the air inside of the vehicle clean,
using the ion control and the automatic air
intake control with exhaust gas/outside
odor detecting sensor.
SAA2734
Models with navigation system
SAA2735
Models without navigation system
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(229,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
Ion control:
This unit generates highly concentrated
Plasmacluster
®
ions into the air blown
from the ventilators and reduces odor
absorbed into the interior trim.
The high-density Plasmacluster
®
ions gen-
erated in the air conditioner’s air stream
not only suppress airborne bacteria and
reduce the adherence of odors to the
interior trim, but also have a proven skin
moisture preserving effect.
When the air conditioner is turned on, the
system generates Plasmacluster
®
ions
automatically.
The amount of Plasmacluster
®
ions in-
creases according to the amount of air
flow. When the air flow is high, “
” is
displayed on the screen and when the air
flow is low, the indication in the screen
changes to “
”.
Plasmacluster
®
and Plasmacluster
®
ion
are trademarks of Sharp Corporation.
Exhaust gas/outside odor detecting sen-
sor:
This vehicle is equipped with an exhaust
gas/outside odor detecting sensor. When
the automatic intake air control is ON, the
sensor detects odors and exhaust gas and
the system then automatically changes
from the outside air circulation mode to
the recirculation mode.
When the intake air control button is
pushed under the following conditions,
the indicator light on the “
” side will
illuminate and the exhaust gas/outside
odor detecting sensor will turn on.
.
The air flow control is not in the front
defroster mode (the indicator light on
the “
” front defroster button is
turned off).
.
The outside temperature is about 328F
(08C) or more.
.
The exhaust gas/outside odor detecting
sensor detects industrial odors such as
pulp or chemicals and exhaust gas such
as gasoline or diesel.
When the automatic intake air control is
ON, for the first 5 minutes, the recircula-
tion mode is selected to prevent dust, dirt
and pollen from entering the vehicle and
cleans the air inside of the vehicle with
Plasmacluster
®
ions that are emitted from
the ventilator.
After 5 minutes, the sensor detects outside
odor and exhaust gas and automatically
alternates between the recirculation mode
and outside air circulation mode.
OPERATING TIPS
When the engine coolant temperature and
outside air temperature are low, the air
flow from the foot outlets may not operate.
This is not a malfunction. After the coolant
temperature warms up, air will flow nor-
mally from the foot outlets.
Monitor, climate, audio, phone and voice recognition systems
4-59
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(230,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-60
Monitor, climate, audio, phone and voice recognition systems
SAA1983
The sunload sensor
*
A
on the instrument
panel helps maintain a constant tempera-
ture. Do not put anything on or around this
sensor.
IN-CABIN MICROFILTER
To make sure that the air conditioner heats,
defogs/defrosts and ventilates efficiently,
replace the filter according the specified
maintenance intervals listed in the “9.
Maintenance and schedules” section. If
replacement is required, it is recom-
mended you visit an INFINITI retailer for
this service.
The filter should be replaced if the air flow
decreases significantly or if windows fog
up easily when operating the heater or air
conditioner. A natural grape seed polyphe-
nol filter (if so equipped) collects and
neutralizes dirt, pollen, dust, etc.
SERVICING CLIMATE CONTROL
The climate control system in your INFINITI
is charged with a refrigerant designed with
the environment in mind. This refrigerant
will not harm the earth’s ozone layer.
However, special charging equipment and
lubricant are required when servicing your
INFINITI air conditioner. Using improper
refrigerants or lubricants will cause severe
damage to your climate control system.
(See “Capacities and recommended fluids/
lubricants” (P.10-2) for climate control
system refrigerant and lubricant recom-
mendations.)
Your INFINITI retailer will be able to service
your environmentally friendly climate con-
trol system.
WARNING
The system contains refrigerant under high
pressure. To avoid personal injury, any air
conditioner service should be done only by
an experienced technician with the proper
equipment.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(231,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
AUDIO OPERATION PRECAUTIONS
Radio
Push the ignition switch to the ACC or ON
position and push the radio band select
button to turn on the radio. If you listen to
the radio with the engine not running, the
ignition switch should be pushed to the
ACC position.
Radio reception is affected by station
signal strength, distance from radio trans-
mitter, buildings, bridges, mountains and
other external influences. Intermittent
changes in reception quality normally are
caused by these external influences.
Using a cellular phone in or near the
vehicle may influence radio reception
quality.
Radio reception:
Your INFINITI radio system is equipped with
state-of-the-art electronic circuits to en-
hance radio reception. These circuits are
designed to extend reception range, and to
enhance the quality of that reception.
However there are some general character-
istics of both FM and AM radio signals that
can affect radio reception quality in a
moving vehicle, even when the finest
equipment is used. These characteristics
are completely normal in a given reception
area, and do not indicate any malfunction
in your INFINITI radio system.
Reception conditions will constantly
change because of vehicle movement.
Buildings, terrain, signal distance and
interference from other vehicles can work
against ideal reception. Described below
are some of the factors that can affect your
radio reception.
Some cellular phones or other devices may
cause interference or a buzzing noise to
come from the audio system speakers.
Storing the device in a different location
may reduce or eliminate the noise.
SAA0306
FM radio reception:
Range: FM range is normally limited to 25
to 30 miles (40 to 48 km), with monaural
(single channel) FM having slightly more
range than stereo FM. External influences
may sometimes interfere with FM station
reception even if the FM station is within
25 miles (40 km). The strength of the FM
signal is directly related to the distance
between the transmitter and receiver. FM
signals follow a line-of-sight path, exhibit-
ing many of the same characteristics as
light. For example they will reflect off
objects.
Fade and drift: As your vehicle moves away
Monitor, climate, audio, phone and voice recognition systems
4-61
AUDIO SYSTEM
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(232,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
4-62
Monitor, climate, audio, phone and voice recognition systems
from a station transmitter, the signals will
tend to fade and/or drift.
Static and flutter: During signal interfer-
ence from buildings, large hills or due to
antenna position, usually in conjunction
with increased distance from the station
transmitter, static or flutter can be heard.
This can be reduced by lowering the treble
setting to reduce the treble response.
Multipath reception: Because of the reflec-
tive characteristics of FM signals, direct
and reflected signals reach the receiver at
the same time. The signals may cancel
each other, resulting in momentary flutter
or loss of sound.
AM radio reception:
AM signals, because of their low frequency,
can bend around objects and skip along
the ground. In addition, the signals can be
bounced off the ionosphere and bent back
to earth. Because of these characteristics.
AM signals are also subject to interference
as they travel from transmitter to receiver.
Fading: Occurs while the vehicle is passing
through freeway underpasses or in areas
with many tall buildings. It can also occur
for several seconds during ionospheric
turbulence even in areas where no obsta-
cles exist.
Static: Caused by thunderstorms, electrical
power lines, electric signs and even traffic
lights.
Satellite radio reception:
When the satellite radio is used for the first
time or the battery has been replaced, the
satellite radio may not work properly. This
is not a malfunction. Wait more than 10
minutes with the satellite radio ON and the
vehicle outside of any metal or large
building for the satellite radio to receive
all of the necessary data.
The satellite radio mode requires an active
SiriusXM Satellite Radio subscription. The
satellite radio is not available in Alaska,
Hawaii and Guam.
The satellite radio performance may be
affected if cargo carried on the roof blocks
the satellite radio signal.
If possible, do not put cargo near the
satellite antenna.
A build up of ice on the satellite radio
antenna can affect satellite radio perfor-
mance. Remove the ice to restore satellite
radio reception.
SAA0480
Compact Disc (CD) player
.
Do not force a compact disc into the CD
insert slot. This could damage the CD
and/or CD changer/player.
.
Trying to load a CD with the CD door
closed could damage the CD and/or CD
changer.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(233,1)
Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]
.
During cold weather or rainy days, the
player may malfunction due to the
humidity. If this occurs, remove the
CD and dehumidify or ventilate the
player completely.
.
The player may skip while driving on
rough roads.
.
The CD player sometimes cannot func-
tion when the passenger compartment
temperature is extremely high. De-
crease the temperature before use.
.
Only use high quality 4.7 in (12 cm)
round discs that have the “COMPACT
disc DIGITAL AUDIO” logo on the disc or
packaging.
.
Do not expose the CD to direct sunlight.
.
CDs that are of poor quality, dirty,
scratched, covered with fingerprints,
or that have pin holes may not work
properly.
.
The following CDs may not work prop-
erly:
— Copy control compact discs (CCCD)
— Recordable compact discs (CD-R)
— Rewritable compact discs (CD-RW)
.
Do not use the following CDs as they
may cause the CD player to malfunc-
tion.
— 3.1 in (8 cm) discs
— CDs that are not round
— CDs with a paper label
— CDs that are warped, scratched, or
have abnormal edges
.
This audio system can only play pre-
recorded CDs. It has no capabilities to
record or burn CDs.
.
If the CD cannot be played, one of the
following messages will be displayed.
CHECK DISC:
— Confirm that the CD is inserted
correctly (the label side is facing
up, etc.).
— Confirm that the CD is not bent or
warped and it is free of scratches.
PUSH EJECT:
This is an error due to the temperature
inside the player is too high. Remove
the CD by pushing the EJECT button,
and after a short time reinsert the CD.
The CD can be played when the
temperature of the player returns to
normal.
UNPLAYABLE:
The file is unplayable in this audio
system (only MP3 or WMA CD).
LHA0484
DVD (Digital Versatile Disc) player
(models with navigation system)
.
Do not force a compact disc into the CD/
DVD insert slot. This could damage the
CD/DVD player.
.
During cold weather or rainy days, the
player may malfunction due to humid-
Monitor, climate, audio, phone and voice recognition systems
4-63
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст