Infiniti Q45 (FY33). Manual — part 296
Wiring Diagram — CHIME —
TEL093M
GI
MA
EM
LC
EC
FE
AT
PD
FA
RA
BR
ST
RS
BT
HA
IDX
WARNING CHIME
EL-175
TEL094M
WARNING CHIME
Wiring Diagram — CHIME — (Cont’d)
EL-176
SEF046TA
CONSULT-II
CONSULT-II INSPECTION PROCEDURE
1.
Turn ignition switch “OFF”.
2.
Connect “CONSULT-II” to the data link connector.
PBR455D
3.
Turn ignition switch “ON”.
4.
Touch “START”.
SEL471W
5.
Touch “IVMS”.
SEL487W
6.
Touch “IGN KEY WARN ALM”, “LIGHT WARN ALM” or “SEAT
BELT TIMER”.
SEL480W
I
DATA MONITOR and ACTIVE TEST are available for the warn-
ing chime.
GI
MA
EM
LC
EC
FE
AT
PD
FA
RA
BR
ST
RS
BT
HA
IDX
WARNING CHIME
EL-177
Trouble Diagnoses
WORK FLOW
CHECK IN
LISTEN TO CUSTOMER COMPLAINT
IVMS COMMUNICATION DIAGNOSIS (EL-291 or EL-297)
Do self-diagnostic results exist?
Yes
No
SYMPTOM
BASIS
E
Repair/Replace according to
the self-diagnostic results.
(EL-293)
Select diagnostic procedure on
the basis of symptom.
F
NG
IVMS COMMUNICATION
DIAGNOSIS (EL-291 or
EL-297)
OK
H
REPAIR/REPLACE
FINAL CHECK
Confirm that the malfunction is completely fixed by operating the
system.
OK
NG
CHECK OUT
NOTICE:
I
When LCU connectors are disconnected for more than 1 minute such as during trouble diagnoses,
the “disconnected” data will be memorized by the BCM. (While BCM memorizes the “disconnected”
data, IVMS communication diagnosis of CONSULT-II will display “PAST NO RESPONSE”.)
Therefore, after reconnecting the LCU connectors, erase the memory.
I
To erase the memory, perform the procedure below.
Erase the memory with CONSULT-II (Refer to EL-291.) or turn the ignition switch to “OFF” position
and remove 7.5A fuse [No.
14
located in the fuse block (J/B)].
WARNING CHIME
H
H
H
H
H
H
H
H
EL-178
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст