Infiniti Q45 (FY33). Manual — part 363
INITIALIZATION
After reconnecting battery cable, perform initialization procedure A or B. If initialization has not been performed,
automatic drive positioner will not operate.
PROCEDURE A
(1) Insert key in the ignition key cylinder. (Ignition switch is in “OFF” position.)
(2) Open
,
close
,
open driver side door. (Do not perform with the door switch operation.)
(3) End
PROCEDURE B
(1) Drive the vehicle at more than 30 km/h (19 MPH).
(2) End
MEMORY AUTOMATIC SET
Two drive positions can be retained in the memory. Press memory switch to set driver’s seat to preset posi-
tion.
(1) PROCEDURE FOR STORING MEMORY
Adjust the position of driver’s seat, steering column with manual set operations.
Ignition switch “ON”.
H
Touch set switch.
Indicator LEDs
(1) Indicator LED for which driver’s seat positions are already retained in memory illuminates
for 5 seconds.
(2) Indicator LED for which driver’s seat positions are not entered in memory illuminates for
0.5 seconds.
Within 5 seconds.
H
Press memory switch for which driv-
er’s seat positions are to be entered
in memory for more than 0.5 sec-
onds. (2 driver’s seat positions can
be memorized.)
Indicator LEDs
(1) To modify driver’s seat positions, press memory switch.
Indicator LED will then go out for 0.5 seconds and then illuminate for 5 seconds.
(2) To enter driver’s seat positions in blank memory, indicator LED illuminates for 5 seconds
after memory switch is pressed.
H
END OF MEMORY SETTING
NOTE: (1) When memory switch for which driver’s seat positions are already retained in memory is pressed, new seat positions will
be retained in memory in place of the previously set positions.
(2) Drive position is erased from the memory when battery cable is disconnected. After connecting battery cable, perform ini-
tialization procedures.
GI
MA
EM
LC
EC
FE
AT
PD
FA
RA
BR
ST
RS
BT
HA
IDX
AUTOMATIC DRIVE POSITIONER — IVMS
System Description (Cont’d)
EL-443
(2) SELECTING THE MEMORIZED POSITION
PROCEDURE-A
Turn ignition switch “ON” and press desired memory switch for
more than 0.3 seconds. (Indicator LED illuminates.)
H
PROCEDURE-B
Open driver’s door and withdraw key from ignition key cylinder.
Then press desired memory switch for more than 0.3 seconds.
(Indicator LED illuminates.) (See NOTE 2.)
(See NOTE 1.)
Within 1 minute
Insert key into ignition key cylinder. (Memory indicator illuminates.)
H
The driver’s seat and steering wheel will move to the memorized posi-
tion. (During adjustments, indicator LED flashes, then illuminates for 5
seconds after adjustment.)
(See NOTE 3.)
NOTES: (1) Do not keep cancel switch pressed as it will not operate.
(2) Automatic exiting setting will be performed.
(3) The driver’s seat position and steering adjustment (see the following Table) operate simultaneously in the order of prior-
ity.
The order of priority
Operated portion
1
Seat sliding
2
Steering telescopic
3
Steering tilt
4
Seat reclining
5
Seat front lifting
6
Seat rear lifting
AUTOMATIC DRIVE POSITIONER — IVMS
System Description (Cont’d)
H
H
EL-444
AUTOMATIC EXITING SETTING
For ease of entry and exit, move driver’s seat to “exiting” position.
“Exiting” positions:
Driver’s seat ... Slides about 40 mm (1.57 in) rear from normal sitting position.
Remove ignition key from ignition key
cylinder.
Open driver’s door while ignition key
is inserted.
Turn ignition switch from “ACC” to
“OFF” with driver’s door opened.
E F
The seat will slide backward, the
steering column tilts up and moves
away simultaneously.
AUTOMATIC SET RETURN
With driver’s seat set to the “exiting” position, operating one of the following procedures moves it to the posi-
tion previously retained in memory.
Insert ignition key.
After 0.45
seconds
Close driver’s door while ignition key
is inserted.
Turn ignition switch from “ACC” to
“ON”.
E F
Driver’s seat and steering column
return to the original position. (The
seat and steering column will move
simultaneously.)
GI
MA
EM
LC
EC
FE
AT
PD
FA
RA
BR
ST
RS
BT
HA
IDX
AUTOMATIC DRIVE POSITIONER — IVMS
System Description (Cont’d)
H
H
EL-445
Schematic
TEL033M
AUTOMATIC DRIVE POSITIONER — IVMS
EL-446
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст