Infiniti M45 (Y34). Manual — part 514
REAR PARCEL SHELF FINISHER
EI-37
C
D
E
F
G
H
J
K
L
M
A
B
EI
REAR PARCEL SHELF FINISHER
PFP:79910
Removal and Installation
AIS001IW
REMOVAL
1.
Remove rear seat. Refer to
2.
Remove rear seat belt floor anchor bolts. Refer to
SB-6, "Removal and Installation of Rear Seat Belt"
.
3.
Remove rear pillar finisher. Refer to
.
4.
Remove high-mounted stop lamp, and disconnect harness connectors.
5.
Remove woofer grille and top tether strap child restraint.
6.
Remove seat belt escutcheon.
7.
Remove clips, and remove rear parcel shelf finisher.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
●
Confirm hooks of rear parcel shelf finisher are completely inserted into holes on vehicle side.
●
Confirm clips are matched over holes on vehicle side, then push in.
PIIA2722E
1.
Rear parcel shelf finisher
2.
High-mounted stop lamp
3.
Top tether strap child restraint cover
(right)
4.
Top tether strap child restraint cover
(center)
5.
Woofer grille
6.
Top tether strap child restraint cover
(left)
EI-38
FLOOR TRIM
FLOOR TRIM
PFP:74902
Removal and installation
AIS004VJ
REMOVAL
1.
Remove front seat and rear seat. Refer to
and
.
2.
Remove center console and ashtray. Refer to
IP-10, "INSTRUMENT PANEL ASSEMBLY"
.
3.
Remove front and rear kicking plate. Refer to
.
4.
Remove front and rear body side welt. Refer to
5.
Remove center pillar finisher lower. Refer to
6.
Remove dash side finisher. Refer to
7.
Turn hexagon wrench in counterclockwise, and remove acceler-
ator pedal stopper from stud bolts on vehicle.
NOTE:
To install, match holes of foot-rest over stud bolts on vehicle.
SIIA0816E
1.
Floor carpet
2.
Foot-rest
3.
Carpet hook
4.
Accelerator pedal stopper
5.
Heater nozzle (left)
6.
Heater nozzle (right)
SIIA0817E
FLOOR TRIM
EI-39
C
D
E
F
G
H
J
K
L
M
A
B
EI
8.
Remove heater nozzle.
9.
Remove wheel house garnish inner.
10. Remove front seat belt ancker. Refer to
Installation of Front Seat Belt"
INSTALLATION
Install in the reverse order of removal.
FOOT-REST
Removal
1.
Remove front kicking plate inner. Refer to
.
2.
Remove front body side welt. Refer to
3.
Remove dash side finisher. Refer to
4.
Turn up floor carpet on driver's seat.
5.
Turn hexagon wrench to counterclockwise, and remove foot-rest
from stud bolts on vehicle.
Installation
Install in the reverse order of removal.
SIIA0359E
SIIA0819E
EI-40
HEADLINING
HEADLINING
PFP:73910
Removal and Installation
AIS004VK
REMOVAL
1.
Remove front and rear kicking plate. Refer to
.
2.
Remove body side welt. Refer to
.
3.
Remove front pillar and center pillar finisher. Refer to
4.
Remove assist grip.
PIIA2723E
1.
Headlining (standard)
2.
Sun-visor (left)
3.
Sun-visor (right)
4.
Holder retainer
5.
Map lamp
6.
Assist grip (standard/left)
7.
Assist grip (standard/right)
8.
Personal lamp
9.
Headlining (sunroof)
10. Map lamp and sunroof switch
11. Assist grip (sunroof/right)
12. Assist grip (sunroof/left)
13. Cover sun-visor
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст