Infiniti M45 (Y34). Manual — part 511
DRIP MOLDING
EI-25
C
D
E
F
G
H
J
K
L
M
A
B
EI
DRIP MOLDING
PFP:76810
Removal and Installation
AIS004VG
REMOVAL
1.
Remove clips of body side weatherstrip, then remove body side weatherstrip.
2.
Remove screws of retainer center, then remove retainer center.
3.
Remove screw and clips of drip molding, then remove drip molding.
INSTALLATION
Install in the reverse order of removal.
CENTER PILLAR COVER
Removal
Lift and twist center pillar cover up from center pillar. Disconnect
clips, and remove center pillar molding.
PIIA2714E
1.
Drip molding
2.
Retainer center
3.
Body side weatherstrip
PIIA2718E
EI-26
DRIP MOLDING
Installation
Install in the reverse order of removal.
DOOR OUTSIDE MOLDING
EI-27
C
D
E
F
G
H
J
K
L
M
A
B
EI
DOOR OUTSIDE MOLDING
PFP:82820
Removal and Installation
AIS001IQ
FRONT DOOR OUTSIDE MOLDING
Removal
1.
Open windows fully.
2.
Remove screw of rear edge.
3.
Lift and twist from rear side, disconnect clips from flange, and pull out molding to backward.
Installation
Install in the reverse order of removal.
REAR DOOR OUTSIDE MOLDING
Removal
1.
Open windows fully.
2.
Remove screws of front and rear edge.
3.
Lift and twist from rear side, and disconnect clip from flange, and pull out molding to backward.
Installation
Install in the reverse order of removal.
PIIA2715E
1.
Front door outside molding
2.
Rear door outside molding
EI-28
DOOR OUTSIDE LOWER MOLDING
DOOR OUTSIDE LOWER MOLDING
PFP:82877
Removal and Installation
AIS001NT
FRONT AND REAR DOOR OUTSIDE LOWER MOLDING
Removal
1.
Open front and rear door.
2.
Remove screws and clips of door outside lower molding.
Installation
Install in the reverse order of removal.
PIIA2717E
1.
Front door outside lower molding
2.
Rear door outside lower molding
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст