Infiniti M45 (Y34). Manual — part 185
NAVIGATION SYSTEM
AV-73
C
D
E
F
G
H
I
J
L
M
A
B
AV
Confirmation/Adjustment Mode
AKS003XL
OPERATION PROCEDURE
1.
Start the engine.
2.
Turn the audio system off.
3.
While pressing the “INFO” switch, turn the volume control dial
clockwise or counterclockwise for 30 clicks or more. (When the
self-diagnosis mode is started, a short beep will be heard.)
●
Shifting from current screen to previous screen is performed
by pressing “PREV” switch.
4.
The initial trouble diagnosis screen will be shown, and items
“Self Diagnosis” and “Confirmation/Adjustment” will become
selective.
5.
When “Confirmation/Adjustment Mode” is selected on the initial
trouble diagnosis screen, the operation will enter the Confirma-
tion/Adjustment Mode mode. In this mode, check and adjust-
ment of each item will become possible.
6.
Select each switch on “CONFIRMATION/ADJUSTMENT”
screen to display the relevant diagnosis screen.
SKIA3512E
SKIA0381E
SKIA3922E
AV-74
NAVIGATION SYSTEM
DISPLAY DIAGNOSIS
●
When RGB signal error occurred in the RGB system, tone of the color bar will change as follows.
●
When the color of the screen looks unusual, refer to
AV-88, "Color of RGB Image is Not Proper"
SKIA0362E
R (red) signal error
: Screen looks bluish
G (green) signal error
: Screen looks yellowish
B (blue) signal error
: Screen looks reddish
NAVIGATION SYSTEM
AV-75
C
D
E
F
G
H
I
J
L
M
A
B
AV
VEHICLE SIGNALS
●
A comparison check can be made of each actual vehicle signal
and the signals recognized by the system.
●
If vehicle speed is NG, refer to
AV-84, "Vehicle Speed Signal Check"
●
AV-84, "Illumination Control Signal Check"
●
AV-85, "Ignition Signal Check"
●
AUTO CLIMATE CONTROL
●
Refer to ATC Automatic Air Conditioner
ATC-49, "Self-Diagnosis Function"
NAVIGATION
Angle Adjustment
●
Adjusts turning angle output detected by the gyroscope.
SKIA3722E
Diagnosis item
Display
Condition
Remarks
Vehicle speed
ON
Vehicle speed > 0 km/h (0 MPH)
Changes in indication may be delayed by
approx. 1.5 seconds. This is normal.
OFF
Vehicle speed = 0 km/h (0 MPH)
-
Ignition switch in ACC position
Light
ON
Lighting switch ON
-
OFF
Lighting switch OFF
IGN
ON
Ignition switch ON
-
OFF
Ignition switch ACC or OFF
Reverse
ON
Selector lever in R-position
Changes in indication may be delayed by
approx. 1.5 seconds. This is normal.
OFF
Selector lever in other than R-position
-
Ignition switch in ACC position
SKIA0364E
AV-76
NAVIGATION SYSTEM
Speed Calibration
●
During normal driving, distance error caused by tire wear and
tire pressure change is automatically adjusted for by the auto-
matic distance correction function. This function, on the other
hand, is for immediate adjustment, in cases such as driving with
tire chain fitted on tires.
HISTORY OF ERRORS
SKIA0365E
SKIA0366E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст