Infiniti M45 (Y34). Manual — part 717
SQUEAK AND RATTLE TROUBLE DIAGNOSES
RF-9
C
D
E
F
G
H
J
K
L
M
A
B
RF
SBT844
RF-10
SUNROOF
SUNROOF
PFP:91210
Component Parts and Harness Connector Location
AIS001HW
System Description
AIS001HX
OUTLINE
Electric sunroof system consists of
●
Sunroof switch
●
Sunroof motor assembly
●
Front door switches
●
BCM (Body Control Module)
BCM is controls power supply for the operation of sunroof motor. Power is supplied to sunroof motor assembly
from BCM. Sunroof will be operated depending on sunroof switch condition.
OPERATION
●
The sunroof can be tilted up or down with the sunroof switch.
●
The sunroof can be opened or closed automatically with the sunroof switch.
PIIA3046E
SUNROOF
RF-11
C
D
E
F
G
H
J
K
L
M
A
B
RF
DELAYED POWER OPERATION
When the ignition switch is turned to OFF position from ON or START position, power is supplied for approxi-
mately 45 seconds
●
to sunroof motor assembly terminal 6
●
from BCM terminal 135.
Then the electrical sunroof can be operated.
The retained power operation is canceled when the driver or passenger side door is opened.
ANTI – PINCH SYSTEM
The CPU of sunroof motor monitors the sunroof motor operation and the sunroof position (full closed or other)
by the signals from sunroof motor. When sunroof motor detects interruption during the following close opera-
tion, sunroof switch controls the motor for open and the sunroof will operate about 150 mm (5.91 in).
The operation condition is the following
●
automatic close operation when ignition switch is in the ON position
●
automatic close operation during retained power operation.
INITIALIZATION PROCEDURE
If the battery is disconnected or the sunroof motor harness connector is disconnected or the sunroof cannot
close or open automatically, use the following procedure to return sunroof operation to normal.
1.
Make sure that glass lid is in CLOSE state.
NOTE:
When glass lid is not in CLOSE state, repeat and operate the CLOSE switch or TILT switch, and make it
operate to CLOSE state.
2.
Pressing the CLOSE switch or TILT switch to CLOSE for approximately 1 second or more.
3.
Operate the sunroof switch and make sure that auto operation functions normally.
RF-12
SUNROOF
Wiring Diagram — SROOF —
AIS001HY
TIWA0233E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст