Infiniti M45 (Y34). Manual — part 119
REPAIR FOR COMPONENT PARTS
AT-361
D
E
F
G
H
I
J
K
L
M
A
B
AT
CAUTION:
If necessary, replace the snap ring.
Front Sun Gear
●
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the front sun gear.
ASSEMBLY
1.
Install 3rd one-way clutch in front sun gear.
CAUTION:
Apply ATF to 3rd one-way clutch.
2.
Using a flat-bladed screwdriver, install snap ring in front sun
gear.
3.
Check operation of 3rd one-way clutch.
a.
Hold oil pump assembly and turn front sun gear.
b.
Check 3rd one-way clutch for correct locking and unlocking
directions.
CAUTION:
If not as shown in the figure, check installation direction of
3rd one-way clutch.
SCIA3111E
SCIA3110E
SCIA3131E
AT-362
REPAIR FOR COMPONENT PARTS
Front Carrier, Input Clutch, Rear Internal Gear
ACS004HE
COMPONENTS
1.
Seal ring
2.
O-ring
3.
Needle bearing
4.
Bearing race
5.
Front carrier assembly
6.
Snap ring
7.
Snap ring
8.
Retaining plate
9.
Driven plate
10. Input clutch drum
11.
Drive plate
12. Rear internal gear
SCIA5426E
REPAIR FOR COMPONENT PARTS
AT-363
D
E
F
G
H
I
J
K
L
M
A
B
AT
DISASSEMBLY
1.
Compress snap ring using 2 flat-bladed screwdrivers.
2.
Remove front carrier assembly and input clutch assembly from
rear internal gear.
3.
Remove front carrier assembly from input clutch assembly.
a.
Remove bearing race from front carrier assembly.
b.
Remove snap ring from front carrier assembly.
CAUTION:
Do not expand snap ring excessively.
4.
Disassemble input clutch assembly.
a.
Remove O-ring and seal rings from input clutch assembly.
SCIA5339E
SCIA2847E
SCIA5476E
SCIA5235E
AT-364
REPAIR FOR COMPONENT PARTS
b.
Remove needle bearing from input clutch assembly.
c.
Using a flat-bladed screwdriver, remove snap ring from input
clutch drum.
d.
Remove drive plates, driven plates and retaining plate from input
clutch drum.
INSPECTION
Front Carrier Snap Ring
●
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the snap ring.
Input Clutch Snap Ring
●
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the input clutch assembly.
Input Clutch Drum
●
Check for deformation, fatigue or damage or burns.
CAUTION:
If necessary, replace the input clutch assembly.
Input Clutch Drive Plates
●
Check facing for burns, cracks or damage.
CAUTION:
If necessary, replace the input clutch assembly.
Input Clutch Retaining Plate and Driven Plates
●
Check facing for burns, cracks or damage.
CAUTION:
If necessary, replace the input clutch assembly.
Front Carrier
●
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the front carrier assembly.
Rear Internal Gear
●
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the rear internal gear assembly.
SCIA2853E
SCIA2864E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст