Infiniti M45 (Y34). Manual — part 161
MODE DOOR MOTOR
ATC-129
C
D
E
F
G
H
I
K
L
M
A
B
ATC
MODE DOOR MOTOR
PFP:27731
Removal and Installation
AJS000QR
REMOVAL
Driver Side Mode Door Motor
1.
Remove instrument panel. Refer to
.
2.
Disconnect mode door motor connector.
3.
Remove mounting screw, and then remove mode door motor.
Passenger Side Mode Door Motor
1.
Remove blower unit. Refer to
2.
Disconnect mode door motor connector.
3.
Remove mounting screw, and then remove mode door motor.
INSTALLATION
Installation is basically the reverse order of removal.
RJIA0284E
RJIA0283E
ATC-130
AIR MIX DOOR MOTOR
AIR MIX DOOR MOTOR
PFP:27732
Removal and Installation
AJS000QS
REMOVAL
Driver Side Air Mix Door Motor
1.
Remove instrument lower driver panel. Refer to
IP-11, "Removal and Installation"
2.
Remove air mix door rod from rod holder.
3.
Disconnect air mix door motor connector.
4.
Remove mounting screws, and then remove the air mix door
motor.
Passenger Side Air Mix Door Motor
1.
Remove blower unit. Refer to
.
2.
Remove air mix door rod from rod holder.
3.
Disconnect air mix door motor connector.
4.
Remove mounting screws, and then remove the air mix door
motor.
INSTALLATION
Installation is basically the reverse order of removal.
RJIA0288E
RJIA0287E
DUCTS AND GRILLES
ATC-131
C
D
E
F
G
H
I
K
L
M
A
B
ATC
DUCTS AND GRILLES
PFP:27860
Removal and Installation
AJS000QT
REMOVAL
Removal of Center Ventilator Grille
1.
Remove cluster lid C. Refer to
IP-11, "Removal and Installation"
2.
Remove mounting screw and clips, and then remove center ven-
tilator grille.
Removal of Side Ventilator Grille
1.
Remove instrument lower driver panel. Refer to
IP-11, "Removal and Installation"
2.
Remove side ventilator grille (left).
3.
Remove glove box cover. Refer to
4.
Remove side ventilator grille (right).
RJIA1315E
RJIA2682E
RJIA1316E
ATC-132
DUCTS AND GRILLES
Removal of Rear Ventilator Grille
1.
Remove console rear cover. Refer to
IP-11, "Removal and Installation"
2.
Remove mounting screws, and then remove rear ventilator
grille.
Removal of Rear Ventilator Ducts
1.
Remove console box. Refer to
IP-11, "Removal and Installation"
.
2.
Remove rear ventilator duct No. 2.
3.
Remove instrument panel. Refer to
.
4.
Remove rear ventilator duct No. 1.
Removal of Foot Duct
1.
Remove heater & cooling unit assembly. Refer to
"HEATER & COOLING UNIT ASSEMBLY"
2.
Remove foot duct.
RJIA0323E
RJIA0337E
RJIA1317E
RJIA0324E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст