Infiniti M45 (Y34). Manual — part 553
SERVICE DATA AND SPECIFICATIONS (SDS)
FL-11
C
D
E
F
G
H
I
J
K
L
M
A
FL
SERVICE DATA AND SPECIFICATIONS (SDS)
PFP:00030
Standard and Limit
ABS004QN
Tightening Torque
ABS004QO
Unit: N·m (kg-m, ft-lb)
Unit: N·m (kg-m, in-lb)*
Fuel tank capacity
Approx. 80
(21-1/8 US gal, 17-5/8 Imp gal)
Fuel recommendation
Fuel tank mounting band
28 - 35 (2.8 - 3.6, 21 - 26)
Filler tube
3.24 - 4.22 (0.33 - 0.43, 29 - 37)*
Fuel filler neck cover
3.21 - 4.22 (0.33 - 0.43, 29 - 37)*
Fuel level sensor unit, fuel filter and fuel pump assembly
2.0 - 2.5 (0.20 - 0.26, 18 - 22)*
FL-12
SERVICE DATA AND SPECIFICATIONS (SDS)
FSU-1
FRONT SUSPENSION
E SUSPENSION
CONTENTS
C
D
F
G
H
I
J
K
L
M
SECTION
FSU
A
B
FSU
FRONT SUSPENSION
PRECAUTIONS . . . . . . . . . . . . . . .. 2
Caution . . . . . . . . . . . . . . . . . . 2
PREPARATION . . . . . . . . . . . . . . ... 3
Special Service Tools . . . . . . . . . . . ... 3
Commercial Service Tools . . . . . . . . . . 4
NOISE, VIBRATION AND HARSHNESS (NVH)
TROUBLESHOOTING . . . . . . . . . . . . 5
NVH Troubleshooting Chart . . . . . . . . . . 5
FRONT SUSPENSION ASSEMBLY . . . . . . ... 6
On-Vehicle Inspection and Service . . . . . . .. 6
Wheel Alignment Inspection . . . . . . . . . . 6
Components . . . . . . . . . . . . . . . . 8
COIL SPRING AND STRUT . . . . . . . . . ... 9
Removal and Installation . . . . . . . . . . .. 9
REMOVAL . . . . . . . . . . . . . . . . 9
INSTALLATION . . . . . . . . . . . . . . 9
Disassembly and Assembly . . . . . . . . . 10
SUSPENSION ARM . . . . . . . . . . . . .. 12
Removal and Installation . . . . . . . . . . 12
STABILIZER BAR . . . . . . . . . . . . . . 14
Removal and Installation . . . . . . . . . . 14
FRONT SUSPENSION MEMBER . . . . . . . . 15
Removal and Installation . . . . . . . . . . 15
FSU-2
PRECAUTIONS
PRECAUTIONS
PFP:00001
Caution
AES0008C
●
When installing rubber bushings, final tightening must be carried out under unladen condition with tires on
level ground. Oil will shorten the life of rubber bushings. Be sure to wipe off any spilled oil.
●
Unladen condition means that fuel, coolant and lubricant are full. Spare tire, jack, hand tools and mats in
designated positions.
●
After servicing suspension parts, be sure to check wheel alignment.
●
Caulking nuts are not reusable. Always use new ones when installing. Since new caulking nuts are pre-
oiled, tighten as they are.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст