Infiniti M45 (Y34). Manual — part 157
TROUBLE DIAGNOSIS
ATC-113
C
D
E
F
G
H
I
K
L
M
A
B
ATC
4.
CHECK CIRCUIT CONTINUITY BETWEEN AV C/U (AV AND NAVI C/U) AND AUTO AMP.
1.
Turn ignition switch OFF.
2.
Disconnect AV C/U (AV and NAVI C/U) and auto amp. connector.
3.
Check continuity between AV and NAVI C/U harness connector B29 terminal 38 (L) or AV C/U harness
connector M77 terminal 43 (L) and auto amp. harness connector M119 terminal 10 (L).
OK or NG
OK
>> Replace auto amp.
NG
>> Repair harness or connector.
38 – 10
: Continuity should exist.
43 – 10
: Continuity should exist.
RJIA1313E
ATC-114
CONTROL UNIT
CONTROL UNIT
PFP:27500
Removal and Installation
AJS000QK
REMOVAL
Refer to
AV-29, "Removal and Installation of Audio Unit"
.
INSTALLATION
Installation is basically the reverse order of removal.
AMBIENT SENSOR
ATC-115
C
D
E
F
G
H
I
K
L
M
A
B
ATC
AMBIENT SENSOR
PFP:27722
Removal and Installation
AJS000QL
REMOVAL
1.
Remove front grille. Refer to
2.
Disconnect ambient sensor connector, and then remove ambi-
ent sensor.
INSTALLATION
Installation is basically the reverse order of removal.
RJIA0243E
ATC-116
IN-VEHICLE SENSOR
IN-VEHICLE SENSOR
PFP:27720
Removal and Installation
AJS000QM
REMOVAL
1.
Remove instrument lower driver panel. Refer to
IP-11, "Removal and Installation"
2.
Disconnect in-vehicle sensor connector and aspirator duct.
3.
Remove mounting screw, and then remove in-vehicle sensor.
INSTALLATION
Installation is basically the reverse order of removal.
RJIA0312E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст