Infiniti M45 (Y34). Manual — part 508
CLIP AND FASTENER
EI-13
C
D
E
F
G
H
J
K
L
M
A
B
EI
SIIA0316E
EI-14
CLIP AND FASTENER
SIIA0317E
FRONT BUMPER
EI-15
C
D
E
F
G
H
J
K
L
M
A
B
EI
FRONT BUMPER
PFP:F2022
Removal and Installation
AIS004VD
CAUTION:
Bumper fascia is made of plastic. Do not use excessive force and be sure to keep oil away from it.
1.
Bumper retainer upper
2.
Bumper reinforcement
3.
Bumper fascia
PIIA2709E
EI-16
FRONT BUMPER
REMOVAL
1.
Remove front grille. Refer to
2.
Remove bolts of engine undercover.
3.
Remove front spoiler and spoiler retainer.
4.
Remove bolts and clips of both right/left fender protectors (on front side). Refer to
.
5.
Remove screw of bumper fascia from both right/left front fenders.
6.
Remove clips of bumper fascia from bumper retainer upper.
7.
Disconnect fog lamp and front side marker lamp harness connector.
8.
Remove bumper fascia.
9.
Remove nuts of bumper reinforcement.
10. Remove bolts of bumper upper retainer.
INSTALLATION
Install in the reverse order of removal.
Removal of Bumper Side Brackets
Shave head of rivet with drill [4.0 to 4.5 mm (0.157 to 0.177 in) dia.]
Installation of Bumper Side Brackets
Install bracket to fascia firmly with hand riveter.
4.
Energy absorber
5.
ICC sensor cover
6.
Front spoiler
7.
Spoiler retainer
8.
Bumper side bracket
PIIA0216E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст