Infiniti Q60 Coupe (2021 year). Manual in english — page 15

5-18

Starting and driving

CAUTION

Use this position only when the vehicle is
completely stopped.

R (Reverse):

Use this position to back up. Always be sure
the vehicle is completely stopped before
selecting the R (Reverse) position.

The brake

pedal must be depressed and the shift lever
button pushed in to move the shift lever
from the P (Park) position, the N (Neutral)
position or any drive position to the R
(Reverse) position.

N (Neutral):

Neither forward nor reverse gear is engaged.
The engine can be started in this position.
You may shift to the N (Neutral) position and
restart a stalled engine while the vehicle is
moving.

D (Drive):

Use this position for all normal forward
driving.

JVS0903X

Paddle shifters (if so equipped)

Manual shift mode

When the shift lever is in the manual shift
gate, the transmission is ready for the
manual shift mode. Shift ranges can be
selected manually by moving the shift lever
up or down, or pulling the right-side or left-
side paddle shifter (if so equipped).
When shifting up, move the shift lever to the
+ (up) side or pull the right-side paddle
shifter (+)

(if so equipped). The transmis-

sion shifts to the higher range.
When shifting down, move the shift lever to
the − (down) side or pull the left-side paddle
shifter (−)

(if so equipped). The transmis-

sion shifts to the lower range.
When canceling the manual shift mode,
return the shift lever to the D (Drive)
position. The transmission returns to the
normal driving mode.
When you pull the paddle shifter (if so
equipped) while in the D (Drive) position,
the transmission will shift to the upper or
lower range temporarily. The transmission
will automatically return to the D (Drive)
position after a short period of time. If you
want to return to the D (Drive) position
manually, pull and hold the paddle shifter for
about 1.5 seconds.
In the manual shift mode, the shift range is
displayed in the vehicle information display.
Shift ranges up or down one by one as
follows:

1

M

?

/

2

M

?

/

3

M

?

/

4

M

?

/

5

M

?

/

6

M

?

/

7

M

7

M

(7th):

Use this position for all normal forward
driving at highway speeds.

6

M

(6th) and 5

M

(5th):

Use these positions when driving up long
slopes, or for engine braking when driving
down long slopes.

4

M

(4th), 3

M

(3rd) and 2

M

(2nd):

Use these positions for hill climbing or engine
braking on downhill grades.

1

M

(1st):

Use this position when climbing steep hills
slowly or driving slowly through deep snow,
or for maximum engine braking on steep
downhill grades.

.

Remember not to drive at high speeds for

extended periods of time in lower than
7th gear. This reduces fuel economy.

.

Moving the shift lever rapidly to the same

side twice will shift the ranges in succes-
sion.

.

In the manual shift mode, the transmis-

sion may not shift to the selected gear
or may automatically shift to the other
gear. This helps maintain driving per-
formance and reduces the chance of
vehicle damage or loss of control.

.

When the transmission does not shift to

the selected gear, the Automatic Trans-
mission (AT) position indicator (in the
vehicle information display) will blink
and the buzzer will sound.

.

In the manual shift mode, the transmis-

sion automatically shifts down to 1st
gear before the vehicle comes to a stop.
When accelerating again, it is necessary
to shift up to the desired range.

Accelerator downshift — In D (Drive)
position —

For passing or hill climbing, fully depress the
accelerator pedal to the floor. This shifts the
transmission down into the lower gear,
depending on the vehicle speed.

Fail-safe

When the fail-safe operation occurs, note
that the transmission will be locked in any of
the forward gears according to the condi-
tion.

If the vehicle is driven under extreme
conditions, such as excessive wheel spinning
and subsequent hard braking, the fail-safe
system may be activated. This will occur
even if all electrical circuits are functioning
properly. In this case, push the ignition
switch to the OFF position and wait for 3
seconds. Then push the ignition switch back
to the ON position. The vehicle should
return to its normal operating condition. If
it does not return to its normal operating
condition, have the transmission checked
and repaired, if necessary. It is recom-
mended you visit an INFINITI retailer for
this service.

JVS0188X

Shift lock release

If the battery charge is low or discharged,
the shift lever may not be moved from the P
(Park) position even with the brake pedal
depressed and the shift lever button pushed.
To move the shift lever, perform the follow-
ing procedure:
1. Push the ignition switch to the OFF or

LOCK position.

2. Apply the parking brake.
3. Remove the shift lock cover

using a

suitable tool.

4. Push down the shift lock

using

mechanical key as illustrated.

Starting and driving

5-19

5-20

Starting and driving

5. Push the shift lever button

and move

the shift lever to N (Neutral) position
while holding down the shift lock.

If the lever cannot be moved out of P (Park),
have the automatic transmission system
checked as soon as possible. It is recom-
mended you visit an INFINITI retailer for this
service.

Adaptive Shift Control (ASC)

The adaptive shift control system automati-
cally operates when the transmission is in
the D (Drive) position and selects an appro-
priate gear depending on the road conditions
such as uphill, downhill or curving roads.

Control on uphill and curving roads:

A low gear is maintained that suits the
degree of the slope or curve to allow smooth
driving with a small number of shifts.

Control on downhill roads:

The adaptive shift control system shifts to a
low gear that suits the degree of the slope,
and uses the engine braking to reduce the
number of times that the brake must be
used.

Control on winding roads:

A low gear is maintained on continuous
curves that involve repeated acceleration
and deceleration, so that smooth accelera-
tion is available instantly when the accel-

erator pedal is depressed.

NOTE:

.

Adaptive shift control may not operate

when the transmission oil temperature
is low immediately after the start of
driving or when it is very hot.

.

During some driving situations, hard

braking for example, the adaptive shift
control may automatically operate. The
transmission may automatically shift to
a lower gear for engine braking. This
increases engine speed but not vehicle
speed. Vehicle speed is controlled by the
accelerator pedal when the vehicle is in
the Adaptive shift control mode.

.

When the adaptive shift control oper-

ates, the transmission sometimes main-
tains a lower gear for a longer period of
time than when adaptive shift control is
not operating. Engine speed will be
higher for a specific vehicle speed while
ASC system is operating than when ASC
is not operating.

WARNING

.

Be sure the parking brake is fully
released before driving. Failure to do
so can cause brake failure and lead to
an accident.

.

Do not release the parking brake
from outside the vehicle.

.

Do not use the gear shift in place of
the parking brake. When parking, be
sure the parking brake is fully en-
gaged.

.

To help avoid risk of injury or death
through unintended operation of the
vehicle and/or its systems, do not
leave children, people who require the
assistance of others or pets unat-
tended in your vehicle. Additionally,
the temperature inside a closed ve-
hicle on a warm day can quickly
become high enough to cause a sig-
nificant risk of injury or death to
people and pets.

PARKING BRAKE

SPA2331

To apply:

Fully depress the parking brake

pedal

.

To release:

1. Firmly apply the foot brake

.

2. Depress the parking brake pedal

and

the parking brake will be released.

3. Before driving, be sure the brake warning

light goes out.

JVS0189X

INFINITI Drive Mode Selector

JVS0191M

Multiple driving modes can be selected by
using the INFINITI Drive Mode Selector
(PERSONAL, SPORT+ (if so equipped),
SPORT, STANDARD, ECO and SNOW).

NOTE:

When the INFINITI Drive Mode Selector
selects a mode, the mode may not switch
immediately. This is not a malfunction.

The current mode is displayed in the vehicle
information display.
To change the mode, push the INFINITI
Drive Mode Selector up or down. The mode
list will appear on the upper display and you
can select the mode.
PERSONAL

œ

SPORT+ (if so equipped)

œ

SPORT

œ

STANDARD

œ

ECO

œ

SNOW

NOTE:

The mode list will be turned off in approxi-
mately 5 seconds after the mode is selected.

If the driving mode cannot be switched using
the INFINITI Drive Mode Selector when the
ignition switch is in the ON position, have
the system checked. It is recommended you
visit an INFINITI retailer for this service.

Starting and driving

5-21

INFINITI DRIVE MODE SELECTOR

5-22

Starting and driving

STANDARD MODE

Allows for optimum driving according to the
driving conditions.
This mode will be selected first each time the
engine is started.

SPORT+ MODE (if so equipped)

In addition to the characteristics of the
SPORT mode, this mode heightens steering
response and changes the setting of VDC
(Vehicle Dynamic Control) for a more sporty
driving experience.

NOTE:

.

VDC operation is reduced when the

INFINITI Drive Mode Selector is used
to select the SPORT+ mode. The VDC
system may not operate in the same
circumstances when compared to op-
eration in the standard mode. To help
prevent accidents drive carefully, avoid
careless or dangerous driving techniques
and be especially careful when driving
and cornering on slippery surfaces.

.

In the SPORT+ mode, fuel economy may

be reduced.

SPORT MODE

.

Adjusts the engine and transmission

points for a higher response.

.

The setting of the steering system is

adjusted to provide a quick steering
response and a heavy steering effort.

.

The setting of the suspension system is

adjusted to increase the damping force
(if so equipped).

NOTE:

In the SPORT mode, fuel economy may be
reduced.

SNOW MODE

Changes the engine characteristics to aid
driving on slippery roads.

ECO MODE

Assists the driver’s eco-driving. The engine
and transmission points are adjusted for
improved fuel economy, providing such a
driving features as smooth starting or con-
stant cruising.

NOTE:

Selecting the ECO mode will not necessarily
improve fuel economy as many driving
factors influence its effectiveness.

Operation

Select the ECO mode using the INFINITI
Drive Mode Selector. The ECO drive indica-
tor light on the instrument panel illuminates.
When the accelerator pedal is depressed
within the range of economy drive, the ECO
drive indicator light illuminates in green.
When the accelerator pedal is depressed
above the range of economy drive, the ECO
drive indicator light turns off. For ECO pedal
system equipped models, see “ECO pedal
system” (P.5-22).
The ECO drive indicator light will not
illuminate in the following cases:

.

When the shift lever is in the R (Reverse)

position.

.

When the vehicle speed is below 2 MPH

(3.2 km/h) or over 90 MPH (144 km/h).

.

When the cruise control (if so equipped)

or the Intelligent Cruise Control (ICC)
system (if so equipped) is operated.

ECO pedal system (if so equipped)

The ECO pedal system helps assist the driver
to improve fuel economy by increasing the
reaction force of the accelerator pedal.
When the ECO drive indicator light is
blinking or remains off, the ECO pedal
system increases the reaction force of the
accelerator pedal.

JVS0934X

When the ECO drive indicator illuminates in
green, the accelerator reaction force is
normal. When the ECO drive indicator light
is blinking or remains off, the ECO pedal
system increases the reaction force of the
accelerator pedal.
The ECO pedal system may not vary accel-
erator reaction force under the following
conditions:

.

When the shift lever is in the N (Neutral)

or R (Reverse) position.

.

When Intelligent Cruise Control (ICC) is

being operated.

If the ECO pedal system malfunctions, it will
cancel automatically. The ECO pedal system
will not vary the reaction force of the

accelerator pedal.
When the INFINITI Drive Mode Selector is
rotated from the ECO mode to another
m o d e ( S T A N D A R D , S P O R T + ( i f s o
equipped), SPORT, SNOW or PERSONAL)
while the ECO pedal system is operating, the
ECO pedal system continues to operate until
the accelerator pedal is released.
If the accelerator pedal is depressed quickly,
the ECO pedal system will not increase the
reaction force of the acceleration pedal. The
ECO pedal system is not designed to prevent
the vehicle from accelerating.

Adjusting the ECO pedal system reaction
force:

The ECO pedal system reaction force can be
adjusted. The reaction force setting will be
maintained until the setting is changed even
if the engine is turned off.

JVS0246X

Setting ECO pedal reaction force:

1. Push the MENU button

and touch

[Settings] on the lower display.

2. Touch [Drive Mode Enhancement].
3. Touch [ECO Pedal].
4. To set the reaction force of the ECO

pedal system, touch [Standard] or [Soft].

5. To turn off the ECO pedal system, touch

[Off].

When the ECO pedal system is turned off,
the accelerator will operate normally.
The displayed keys on the lower display may
vary depending on models, specifications
and software versions.

Starting and driving

5-23

5-24

Starting and driving

PERSONAL MODE

When the PERSONAL mode is selected, the
following functions can be adjusted indivi-
dually.

.

Engine/Transmission

.

Steering

.

Suspension (if so equipped)

.

Active Trace Control

JVS0246X

How to set the PERSONAL mode

Perform the following steps to set the
PERSONAL mode.
1. Push the MENU button

and touch

[Drive Mode Selector] on the lower
display.

2. Touch [Engine/Transmission], [Steer-

ing], [Suspension] (if so equipped) or
[Active Trace Control] and select each
item. (See “Engine/Transmission”,
“Steering”, “Suspension” and “Active
Trace Control” about the feature of each
item.)

3. Touch [Back] or [Home] to finish the

PERSONAL mode setting.

The displayed keys on the lower display may
vary depending on models, specifications
and software version.

Engine/Transmission:

“Engine/Transmission” can be set to [Sport],
[Eco], [Standard] or [Snow].

Steering (models with Direct Adaptive
Steering):

Multiple combinations of steering mode and
steering response can be set.

Mode

Response

Sport+ (if so equipped)

Dynamic+

Dynamic

Default

Sport

Dynamic+

Dynamic

Default

Standard

Default

Steering (models without Direct Adaptive
Steering):

“Steering” can be set to [Sport] or [Stan-
dard].

Suspension (if so equipped):

“Suspension” can be set to [Sport] or
[Standard].

Active Trace Control:

“Active Trace Control” can be set to ON
(enabled) or OFF (disabled).
For details about the Active Trace Control,
see “Active trace control” (P.5-133).

Reset Drive Mode Settings to Default:

Touch [Reset Drive Mode Settings to De-
fault] and touch [OK] to restore all the
PERSONAL mode settings to default.

WARNING

Failure to follow the warnings and
instructions for proper use of Active
Lane Control could result in serious
injury or death.

.

Active Lane Control will not always
steer the vehicle to keep it in the lane.
It is not designed to prevent loss of
control. It is the driver’s responsibility
to stay alert, drive safely, keep the
vehicle in the traveling lane, and be in
control of vehicle at all times.

Active Lane Control enables the driver to
make fewer steering corrections on free-
ways.

Starting and driving

5-25

ACTIVE LANE CONTROL (if so equipped)

5-26

Starting and driving

WAF0324X

/OK

switch

Vehicle information display
Dynamic driver assistance switch
Upper display
Lower display

JVS0823X

JVS0251X

ACTIVE LANE CONTROL OP-
ERATION

Active Lane Control slightly corrects front
tire angles and steering wheel torque to help
reduce the difference between the vehicle’s
direction and the lane direction

which is

detected by using the camera unit

located

above the inside mirror.
Active Lane Control operates under the
following conditions:

.

When the vehicle is driven at speeds of

approximately 45 MPH (70 km/h) and
above.

.

When the Lane Departure Prevention

(LDP) system is enabled in the settings

menu on the lower display. To turn on
the LDP system, see “Lane Departure
Warning (LDW)/Lane Departure Pre-
vention (LDP)” (P.5-33).

.

When Active Lane Control is enabled in

the settings menu on the display.

Starting and driving

5-27

5-28

Starting and driving

WAF0324X

/OK

switch

Vehicle information display
Dynamic driver assistance switch
Upper display
Lower display

TURNING ACTIVE LANE CON-
TROL ON/OFF

To turn on Active Lane Control, push the
dynamic driver assistance switch on the
steering wheel after starting the engine.
Push the dynamic driver assistance switch
again to turn off Active Lane Control.
The dynamic driver assistance switch is used
for Active Lane Control, LDP, Blind Spot
Intervention

®

(BSI) and Distance Control

Assist (DCA) systems. When the dynamic
driver assistance switch is pushed, the LDP,
BSI and DCA systems will also turn on or off
simultaneously. These systems can be in-
dividually set to on or off on the lower
display.

JVS0248X

The status of Active Lane Control can be
checked in the chassis control display in the
vehicle information display

.

.

When Active Lane Control is turned on,

the chassis control

is displayed.

.

When Active Lane Control is operating,

the chassis control

is displayed.

For setting of the chassis control display, see
INFINITI InTouch

TM

Owner’s Manual.

HOW TO ENABLE/DISABLE AC-
TIVE LANE CONTROL

Perform the following steps to enable or
disable Active Lane Control. If Type A
setting is not available, perform Type B
setting.

Type A (if so equipped):

1. Push the

/OK

switch on the steering

wheel.

2. Touch [TURN ALC ON] or [TURN ALC

OFF] on the upper display to enable or
disable Active Lane Control.

Type B (if so equipped):

1. Push the MENU button and touch

[Driver Assistance] on the lower display.

2. Touch [Lane Assist].
3. Touch [Active Lane Control] to enable or

disable Active Lane Control.

The displayed keys on the display may vary
depending on models, specifications and
software version.

NOTE:

If the Lane Departure Prevention (LDP)
system setting is OFF, Active Lane Control
cannot be operated. To use Active Lane
Control, set the LDP system to ON. See
“How to enable/disable the LDP system”
(P.5-37).

Starting and driving

5-29

5-30

Starting and driving

Active Lane Control settings (Type
B only)

Perform the following steps to set Active
Lane Control.
1. Push the MENU button and touch

[Driver Assistance] on the lower display.

2. Touch [Lane Assist].
3. Enable [Active Lane Control].
4. Touch [Active Lane Control Setting] and

select [Low] or [High] to change the
setting of Active Lane Control.

The displayed keys on the lower display may
vary depending on models, specifications
and software version.

ACTIVE LANE CONTROL LIM-
ITATIONS

WARNING

Listed below are the limitations for
Active Lane Control. Failure to operate
the vehicle in accordance with these
limitations could result in serious injury
or death.

.

Active Lane Control is primarily in-
tended for use on well-developed
freeways or highways. It may not

detect the lane markers for certain
roads, weather or driving conditions.

.

Using Active Lane Control under
some conditions of road, lane marker
or weather, or if you attempt to
change lanes without using the lane
change signal could lead to an un-
expected system operation. In such
conditions, you need to correct the
vehicle’s direction with your steering
operation to avoid accidents.

.

Active Lane Control will not operate
at speeds below approximately 45
MPH (70 km/h) or if it cannot detect
lane markers.

.

Active Lane Control may not operate
properly and should not be used
under the following conditions:

— During bad weather (rain, fog,

snow, etc.).

— When driving on slippery roads,

such as on ice or snow, etc.

— When driving on winding or un-

even roads.

— When there is a lane closure due

to road repairs.

— When driving in a makeshift lane.

— When driving on roads where the

lane width is too narrow.

— When driving with a tire that is

not within normal tire conditions
(for example, tire wear, low tire
pressure, installation of spare tire,
tire chains, non-standard wheels).

— When the vehicle is equipped with

non-original steering parts or sus-
pension parts.

.

Active Lane Control may or may not
operate properly under the following
conditions:

— On roads where there are multi-

ple parallel lane markers; lane
markers that are faded or not
painted clearly; yellow painted
lane markers; non-standard lane
markers; or lane markers covered
with water, dirt, snow, etc.

— On roads where discontinued lane

markers are still detectable.

— On roads where there are sharp

curves.

— On roads where there are sharply

contrasting objects, such as sha-
dows, snow, water, wheel ruts,
seams or lines remaining after
road repairs. (Active Lane Control
could detect these items as lane
markers.)

— On roads where the traveling lane

merges or separates.

— When the vehicle’s traveling di-

rection does not align with the
lane marker.

— When traveling close to the ve-

hicle in front of you, which ob-
structs the lane camera unit
detection range.

— When rain, snow, dirt or object

adheres to the windshield in front
of the lane camera unit.

— When the headlights are not

bright due to dirt on the lens or
if the aiming is not adjusted
properly.

— When strong light enters the lane

camera unit. (For example, the
light directly shines on the front
of the vehicle at sunrise or sun-
set.)

— When a sudden change in bright-

ness occurs. (For example, when
the vehicle enters or exits a tunnel
or under a bridge.)

— When entering or exiting toll-

gates.

— When driving on roads with a

widening or narrowing lane width.

JVS0824X

Vehicle information display

SYSTEM TEMPORARILY UNA-
VAILABLE

Automatic deactivation

Active Lane Control is not designed to
operate under the following conditions:

.

When the Vehicle Dynamic Control

(VDC) system (except TCS function) or
ABS operates.

.

When you operate the lane change signal

and change the traveling lanes in the
direction of the signal. (Active Lane
Control is deactivated for approximately
2 seconds after the lane change signal is

Starting and driving

5-31

5-32

Starting and driving

turned off.)

.

When the vehicle speed lowers to less

than approximately 45 MPH (70 km/h).

.

When the hazard warning flashers are

operated.

After the above conditions have finished and
the operating conditions are satisfied again,
Active Lane Control will resume operation.

Temporary disabled status at high
temperature

If the vehicle is parked in direct sunlight
under high temperature conditions (over
approximately 104°F (40°C)) and then Ac-
tive Lane Control is turned on, Active Lane
Control may be deactivated automatically.
The high cabin temperature message will
appear in the vehicle information display

.

Action to take:

When the interior temperature is reduced,
push the dynamic driver assistance switch
again to turn Active Lane Control back on.

SYSTEM MALFUNCTION

If Active Lane Control malfunctions, it will
cancel automatically. The chassis control
warning will appear in the vehicle informa-
tion display.

Action to take:

If the chassis control warning appears, pull
off the road to a safe location and stop the
vehicle. Turn the engine off and restart the
engine. If the chassis control warning con-
tinues to appear, have Active Lane Control
checked. It is recommended you visit an
INFINITI retailer for this service.

JVS0823X

SYSTEM MAINTENANCE

The lane camera unit

for Active Lane

Control is located above the inside mirror. To
keep the proper operation of Active Lane
Control and prevent a system malfunction,
be sure to observe the following:

.

Always keep the windshield clean.

.

Do not attach a sticker (including trans-

parent material) or install an accessory
near the camera unit.

.

Do not place reflective materials, such as

white paper or a mirror, on the instru-
ment panel. The reflection of sunlight
may adversely affect the camera unit’s
capability of detecting the lane markers.

.

Do not strike or damage the areas around

the camera unit. Do not touch the
camera lens or remove the screw located
on the camera unit. It is recommended
you contact an INFINITI retailer if the
camera unit is damaged due to an
accident.

WARNING

Failure to follow the warnings and
instructions for proper use of the LDW
and LDP systems could result in serious
personal injury or death.

.

The LDW and LDP systems will not
prevent loss of control. It is the
driver’s responsibility to stay alert,
drive safely, keep the vehicle in the
traveling lane, and be in control of
the vehicle at all times.

.

The LDP system may activate if you
change lanes without first activating
your turn signal or, for example, if a
construction zone directs traffic to
cross an existing lane marker. If this
occurs, you may need to apply cor-
rective steering to complete your lane
change.

.

Because the LDP system may not
activate under the road, weather,
and lane marker conditions described
in this section, it may not activate
every time your vehicle begins to
leave its lane and you will need to
apply corrective steering.

.

Lane Departure Warning (LDW) system

— warns the driver with an indicator in

the vehicle information display and
vibrations of the steering wheel that
the vehicle is beginning to leave the
driving lane.

.

Lane Departure Prevention (LDP) system

(if so equipped)
— warns the driver with an indicator in

the vehicle information display and
vibrations of the steering wheel, and
helps the driver to return the vehicle
to the center of the traveling lane.

Starting and driving

5-33

LANE DEPARTURE WARNING
(LDW)/LANE DEPARTURE
PREVENTION (LDP) (if so equipped)