Infiniti QX4 (R50). Manual — part 317
MEL786L
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
ILLUMINATION
Wiring Diagram — ILL — (Cont’d)
EL-85
MEL787L
ILLUMINATION
Wiring Diagram — ILL — (Cont’d)
EL-86
MEL788L
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
ILLUMINATION
Wiring Diagram — ILL — (Cont’d)
EL-87
System Description
NBEL0038
POWER SUPPLY AND GROUND
NBEL0038S06
Power is supplied at all times:
I
through 7.5A fuse [No. 24, located in the fuse block (J/B)]
I
to key switch terminal 2 and
I
to smart entrance control unit terminal 10.
When the key is removed from ignition key cylinder, power is interrupted:
I
through key switch terminal 1
I
to smart entrance control unit terminal 32.
With the ignition key switch in the ON or START position, power is supplied:
I
through 7.5A fuse [No. 11, located in the fuse block (J/B)]
I
to smart entrance control unit terminal 33.
Ground is supplied:
I
to smart entrance control unit terminal 16
I
through body grounds terminals M77 and M111.
When the front driver side door is opened, ground is supplied:
I
through body grounds B11, B22 and D210
I
to front door switch (LH) terminal 2
I
from front door switch (LH) terminal 1
I
to smart entrance control unit terminal 29.
When the front passenger side door is opened, ground is supplied:
I
through case ground of front door switch (RH)
I
from front door switch (RH) terminal 1
I
to smart entrance control unit terminal 40.
When any other door (except front door) is opened, ground is supplied to smart entrance control unit termi-
nal 28 in the same manner as the front door switch (front passenger side).
When the front driver side door is unlocked, the smart entrance control unit receives a ground signal:
I
through body grounds terminals M77 and M111
I
to front door lock actuator (driver side unlock sensor) terminal 2
I
from front door lock actuator (driver side unlock sensor) terminal 4
I
to smart entrance control unit terminal 36.
When a signal, or combination of signals is received by the smart entrance control unit, ground is supplied:
I
through smart entrance control unit terminal 8
I
to interior lamp terminal 2.
With power and ground supplied, the interior lamp illuminates.
SWITCH OPERATION
NBEL0038S07
When interior lamp switch is ON, ground is supplied:
I
through case grounds of interior lamp
I
to interior lamp.
And power is supplied:
I
to interior lamp terminal 1
I
from smart entrance control unit terminal 17.
When spot lamp (LH and/or RH) is ON, ground is supplied:
I
through body grounds M4, M66 and M147
I
to spot lamp terminal 2.
And power is supplied:
I
to spot lamp terminal 1
I
from smart entrance control unit terminal 17.
When vanity mirror illumination (LH and/or RH) is ON, ground is supplied:
I
through body grounds M4, M66 and M147
I
to vanity mirror illuminations (LH and RH) terminals 2.
INTERIOR, SPOT, VANITY MIRROR AND LUGGAGE ROOM LAMPS
System Description
EL-88
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст