Infiniti QX4 (R50). Manual — part 391
System Setting (When IVCS Unit is Replaced)
NBEL0187
DESCRIPTION
NBEL0187S01
When the IVCS unit is replaced, carry out the following data set-
tings.
I
Phone setup — Data setting regarding NAM (Number Assign-
ment Module)
I
Phone number — Phone number setting
NOTE:
I
Data must not be updated without prior approval from the
customer.
I
NAM and phone number can be programed by using hand-
set. For details, refer to the handset operation manual.
I
The IVCS unit does not permit updating of NAM more than
15 times.
WORK FLOW
NBEL0187S02
SEL108WC
*1: EL-382
*2: EL-383
*3: EL-384
NOTE:
I
If a Communicator Response Center operator does not
come on line even though the system activates, the sys-
tem may not be properly configured. Call the Communica-
tor Response Center at 1-888-427-4812 to verify the con-
figuration information.
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
INFINITI COMMUNICATOR (IVCS)
System Setting (When IVCS Unit is Replaced)
EL-381
I
Whenever dialing the above number, information about
the vehicle is required by the operator. For details, refer to
EL-348.
I
Never release the vehicle to the customer unless INFINITI
Communicator system operation is verified by a Commu-
nicator Response Center operator coming on line.
SEL456W
PHONE NUMBER SETTING
NBEL0187S03
1.
Touch “CONFIGURATION”.
2.
Touch “PHONE NUMBER”.
SEL715W
3.
Touch “WRITE” or “REWRITE”.
I
If no phone number is previously memorized, the display
shows “This unit has no cellular phone number programmed”.
SEL458W
I
If the phone number is previously memorized, the display
shows the current phone number.
I
To erase the phone number, touch “ERASE”.
SEL459W
4.
Input new phone number.
5.
Touch “ENTER”.
INFINITI COMMUNICATOR (IVCS)
System Setting (When IVCS Unit is Replaced) (Cont’d)
EL-382
SEL460W
6.
Touch “OK”.
7.
Carry out the next system setting or contact Communicator
Response Center and information them that data has been
updated or the IVCS unit has been replaced. For details, refer
to EL-381.
NOTE:
Whenever the phone number is updated or the IVCS unit is
replaced, the INFINITI Communicator system automatically
contacts the Communicator Response Center the first time the
vehicle is started.
SEL461W
PHONE SET UP
NBEL0187S04
1.
Touch “CONFIGURATION”.
2.
Touch “PHONE SET UP”.
SEL716W
3.
Touch “WRITE” or “REWRITE”.
I
If no data is previously memorized, the display shows “This
unit has no required data programmed”.
SEL463W
I
If NAM (Number Assignment Module) data is previously
memorized, the display shows the current NAM data.
I
To erase the NAM, touch “ERASE”.
SEL464W
4.
Input new NAM data.
I
SYS ID (Carrier system ID number) — Available number: 0 to
32765
I
GR ID (Group ID mark) — Available number: 0 to 15
I
OVERLOAD CLASS (Access overload class) — Available
number: 0 to 15
I
SECURITY CODE (User security code)
I
UNLOCK CODE
I
INIT PAGE CH (Initial paging channel)
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
INFINITI COMMUNICATOR (IVCS)
System Setting (When IVCS Unit is Replaced) (Cont’d)
EL-383
NOTE:
If an unavailable number is input as “SYS ID”, “GR ID” or
“OVERLOAD CLASS”, CONSULT-II may be locked. In such
cases, disconnect the vehicle battery cable once and then
setup the system again.
5.
Touch “ENTER”.
SEL465W
6.
Touch “OK”.
7.
Carry out the next system setting or contact Communicator
Response Center and inform them that data has been updated
or IVCS unit has been replaced. For details, refer to EL-381.
NOTE:
Whenever the phone number is updated or the IVCS unit is
replaced, the INFINITI Communicator system automatically
contacts the Communicator Response Center the first time the
vehicle is stared.
SEL466W
STOLEN VEHICLE TRACKING/ALARM NOTIFICATION
SETTING CHECK
NBEL0187S05
1.
Touch “CONFIGURATION”.
2.
Touch “VEHICLE TRACKING” or “ALARM NOTIFICATION”.
SEL467W
3.
This function should always be “ON” (function activate.)
NOTE:
I
If either setting is “OFF”, contact the Communicator
Response Center at 1-888-427-4812 to verify the system
setting.
I
Whenever dialing the above number, information about
the vehicle is required by the operator. For details, refer to
EL-348.
INFINITI COMMUNICATOR (IVCS)
System Setting (When IVCS Unit is Replaced) (Cont’d)
EL-384
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст