Infiniti QX4 (R50). Manual — part 398
SEL584X
SPEED CALIBRATION
=NBEL0232S08
1.
Start the engine.
2.
Push both “MAP” and “D/N” switches at the same time for more
than 5 seconds.
3.
Touch “Confirmation/ adjustment”.
4.
Touch “Navigation”.
SEL589X
5.
Touch “Speed Calibration”.
SEL596X
6.
Touch “+” or “−” to adjust the distance change coefficient.
I
To make the distance change coefficient smaller, touch “−”.
I
To make the distance change coefficient larger, touch “+”.
7.
Touch “Set”.
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
NAVIGATION SYSTEM
Confirmation/Adjustment Mode (Cont’d)
EL-409
Setting Mode
=NBEL0233
APPLICATION ITEMS
NBEL0233S01
Mode
Description
Reference page
GPS Information
The GPS includes longtitude, latitude and altitude (distance above sea level) of the
present vehicle position, and current date and time for the area in which the vehicle is
being driven.
Also indicated are the GPS reception conditions and the GPS satellite position.
Quick Stop Customer
Setting
One facility of your selection can be added to your Quick Stop.
Route Priorities
Priorities of search request and automatic re-searching can be set for route search.
Tracking
Tracking to the present vehicle position can be displayed.
Display Setting
The following display settings can be customized.
I
Display color (Day mode or Night mode)
I
Brightness of display
Heading
Heading of the map display can be customized for either north heading or the actual
driving direction of the vehicle.
Nearby Display Icons
Icons of facilities can be displayed.
Facilities to be displayed can be selected from the variety of selections.
Adjust Current Loca-
tion
Current location of position marker can be adjusted. Direction of position marker also
can be calibrated when heading direction of the vehicle on the display is not matched
with the actual direction.
Avoid Area Setting
Particular area can be avoided when routing.
—
Beep On/Off
Beep sounds which correspond to the system operation can be activated/deactivated.
Clear Memory
Address book, Previous destination or Avoid area can be deleted.
SEL597X
HOW TO PERFORM CONTROL PANEL MODE
NBEL0233S02
1.
Start the engine.
2.
Push “MAP” switch.
I
For further procedures, refer to the following pages which
describe each application item of the control panel mode.
SEL598X
“GPS INFORMATION” SETTING
NBEL0233S03
1.
Start the engine.
2.
Push “MAP” switch.
3.
Touch “Setting”.
NAVIGATION SYSTEM
Setting Mode
EL-410
SEL599X
4.
Touch “System Setting”.
SEL600X
5.
Touch “GPS Information”.
SEL146W
6.
Then GPS information will be displayed.
SEL598X
“ADJUST CURRENT LOCATION” SETTING
NBEL0233S04
1.
Start the engine.
2.
Push “MAP” switch.
3.
Touch “Setting”.
4.
Touch “System Setting”.
SEL601X
5.
Touch “Adjust Current Location”.
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
NAVIGATION SYSTEM
Setting Mode (Cont’d)
EL-411
SEL602X
6.
Touch “
” or “
” to calibrate the heading direction. (Arrow
marks will rotate corresponding to the calibration key.)
7.
Touch “Set”. Then the vehicle mark will be matched to the
arrow mark.
8.
Display will show “Heading direction has been calibrated” and
then go back to the current location map.
SEL598X
BEEP ON/OFF SETTING
NBEL0233S05
1.
Start the engine.
2.
Push “MAP” switch.
3.
Touch “Setting”.
4.
Touch “System Setting”.
SEL603X
5.
Touch “Beep on/off”.
SEL604X
6.
Touch “On” or “Off” icon.
I
If you want the beep sound, select “ON”.
I
If you do not want the beep sound, select “OFF”.
7.
Push “MAP” switch, then the display will go back to the current
location map.
DISPLAY SETTING
NBEL0233S06
Description
NBEL0233S0601
The following display setting can be changed in this mode.
I
Dimmer operation (when lighting switch is turned on.)
I
Display color (Day mode or Night mode)
I
Brightness of display
NAVIGATION SYSTEM
Setting Mode (Cont’d)
EL-412
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст