Infiniti QX4 (R50). Manual — part 120
SBT844
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
HA
SC
EL
IDX
SQUEAK AND RATTLE TROUBLE DIAGNOSES
Diagnostic Worksheet (Cont’d)
BT-9
Description
NBBT0003
I
Clips and fasteners in BT section correspond to the following numbers and symbols.
I
Replace any clips and/or fasteners which are damaged during removal or installation.
Symbol
No.
Shapes
Removal & Installation
C101
SBF302H
SBF367BA
C103
SBT095
SBF423H
C203
SBF258G
SBF708E
C205
MBT080A
SBF638CA
CE103
SBF104B
SBF147B
CLIP AND FASTENER
Description
BT-10
Symbol
No.
Shapes
Removal & Installation
CE117
SBF174D
SBF175D
CF109
SBF651B
SBF652B
CG101
SBF145B
SBF085B
CR103
SBF768B
SBF770B
CS101
SBF078B
SBF992G
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
HA
SC
EL
IDX
CLIP AND FASTENER
Description (Cont’d)
BT-11
Removal and Installation
NBBT0004
I
When removing or installing hood, place a cloth or other padding on front fender panel and cowl top. This
prevents vehicle body from being scratched.
I
Bumper fascia is made of plastic. Do not use excessive force and be sure to keep oil away from it.
I
Hood adjustment: Adjust at hinge portion.
I
Hood lock adjustment: After adjusting, check hood lock control operation. Apply a coat of grease to hood
locks engaging mechanism.
I
Hood opener: Do not attempt to bend cable forcibly. Doing so increases effort required to unlock hood.
FRONT BUMPER ASSEMBLY
NBBT0004S01
1. Remove screws and clips securing left and right sides of front fender protector.
2. Remove clips securing bumper fascia to radiator core support lower.
3. Remove clips securing radiator grille and remove the radiator grille.
4. Remove finisher and bolts securing left and right fog lamps and remove the lamps.
5. Remove bolts securing left and right radiator grille and remove the radiator grilles.
6. Remove bolts securing license plate bracket and remove the license plate bracket.
7. Remove clips securing bumper fascia to bumper reinforcement.
8. Remove bolts securing front fender to bumper fascia.
9. Extract bumper fascia assembly.
10. Remove bolts and nuts securing bumper reinforcement.
11. Extract bumper reinforcement.
SBT022A
BODY FRONT END
Removal and Installation
BT-12
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст