Infiniti QX4 (R50). Manual — part 320
CONSTRUCTION
NBEL0043S02
SEL644W
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
METERS AND GAUGES
Combination Meter (Cont’d)
EL-97
Schematic
NBEL0199
MEL131M
METERS AND GAUGES
Schematic
EL-98
Wiring Diagram — METER —
NBEL0045
MEL793L
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
METERS AND GAUGES
Wiring Diagram — METER —
EL-99
Meter/Gauge Operation and Odo/Trip Meter
Segment Check in Diagnosis Mode
NBEL0200
DIAGNOSIS FUNCTION
NBEL0200S01
I
Odo/trip meter segment can be checked in diagnosis mode.
I
Meters/gauges can be checked in diagnosis mode.
HOW TO ALTERNATE DIAGNOSIS MODE
NBEL0200S02
1.
Turn ignition switch to ON and change odo/trip meter to “TRIP
A” or “TRIP B”.
2.
Turn ignition switch to OFF.
3.
Turn ignition switch to ON when pushing odo/trip meter switch.
4.
Push odo/trip meter switch 1 second.
5.
Release odo/trip meter switch.
6.
Push odo/trip meter switch more than three times within 7
seconds.
SEL176W
7.
All odo/trip meter segments should be turned on.
NOTE:
If some segments are not turned on, unified meter control unit with
odo/trip meter should be replaced.
At this point, the unified control meter is turned to diagnosis
mode.
SEL177W
8.
Push odo/trip meter switch. Indication of each meter/gauge
should be as shown left during pushing odo/trip meter switch
if it is no malfunctioning.
NOTE:
It takes about a few seconds for indication of fuel gauge and water
temperature gauge to become stable.
METERS AND GAUGES
Meter/Gauge Operation and Odo/Trip Meter Segment Check in Diagnosis Mode
EL-100
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст