Infiniti QX4 (R50). Manual — part 80
SAT852A
7.
Measure clearance between retaining plate and snap ring. If
not within allowable limit, select proper retaining plate.
Specified clearance:
Standard
0.5 - 0.8 mm (0.020 - 0.031 in)
Allowable limit
1.2 mm (0.047 in)
Retaining plate:
Refer to SDS, AT-358.
SAT841A
8.
Check operation of reverse clutch.
Refer to “DISASSEMBLY” of Reverse Clutch, AT-314.
High Clutch
COMPONENTS
NBAT0132
SAT158K
GI
MA
EM
LC
EC
FE
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
REPAIR FOR COMPONENT PARTS
Reverse Clutch (Cont’d)
AT-317
SAT853A
DISASSEMBLY AND ASSEMBLY
NBAT0133
Service procedures for high clutch are essentially the same as
those for reverse clutch, with the following exception:
SAT854A
I
Check of high clutch operation
SAT525G
I
Removal and installation of return spring
SAT829A
I
Inspection of high clutch return springs
Inspection standard:
Refer to SDS, AT-357.
SAT845A
I
Inspection of high clutch drive plate
Thickness of drive plate:
Standard
1.52 - 1.67 mm (0.0598 - 0.0657 in)
Wear limit
1.40 mm (0.0551 in)
REPAIR FOR COMPONENT PARTS
High Clutch (Cont’d)
AT-318
SAT858A
I
Measurement of clearance between retaining plate and snap
ring
Specified clearance:
Standard
1.8 - 2.2 mm (0.071 - 0.087 in)
Allowable limit
3.2 mm (0.126 in)
Retaining plate:
Refer to SDS, AT-358.
GI
MA
EM
LC
EC
FE
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
REPAIR FOR COMPONENT PARTS
High Clutch (Cont’d)
AT-319
Forward and Overrun Clutches
COMPONENTS
NBAT0134
SAT159K
REPAIR FOR COMPONENT PARTS
Forward and Overrun Clutches
AT-320
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст