Infiniti Q45. Manual — part 136
HEATER CORE
ATC-139
C
D
E
F
G
H
I
K
L
M
A
B
ATC
HEATER CORE
PFP:27140
Removal and Installation
NJS0009C
REMOVAL
1.
Remove heater & cooling unit assembly. Refer to
ATC-135, "HEATER & COOLING UNIT ASSEMBLY"
.
2.
Remove mounting screw, and then remove foot duct (right).
3.
Remove heater core from heater & cooling unit assembly.
INSTALLATION
Installation is basically the reverse order of removal.
SJIA1352E
ATC-140
MODE DOOR MOTOR
MODE DOOR MOTOR
PFP:27731
Removal and Installation
NJS0009D
REMOVAL
Driver Side
1.
Remove instrument lower driver panel. Refer to
IP-10, "Removal and Installation"
.
2.
Remove ventilator duct. Refer to
ATC-144, "Removal of Center Defroster Nozzle, Duct and Ventilator
3.
Disconnect mode door motor connector.
4.
Remove mounting screws, and then remove mode door motor.
Passenger Side
1.
Remove blower unit. Refer to
2.
Disconnect mode door motor connector.
3.
Remove mounting screws, and then remove mode door motor.
INSTALLATION
Installation is basically the reverse order of removal.
RJIA0284E
RJIA0283E
AIR MIX DOOR MOTOR
ATC-141
C
D
E
F
G
H
I
K
L
M
A
B
ATC
AIR MIX DOOR MOTOR
PFP:27732
Removal and Installation
NJS0009E
REMOVAL
Driver Side
1.
Remove instrument lower driver panel. Refer to
IP-10, "Removal and Installation"
2.
Remove air mix door rod from rod holder.
3.
Disconnect air mix door motor connector.
4.
Remove mounting screws, and then remove air mix door motor.
Passenger Side
1.
Remove blower unit. Refer to
.
2.
Remove air mix door rod from rod holder.
3.
Disconnect air mix door motor connector.
4.
Remove mounting screws, and then remove air mix door motor.
INSTALLATION
Installation is basically the reverse order of removal.
RJIA0288E
RJIA0287E
ATC-142
REAR VENTILATOR DOOR MOTOR
REAR VENTILATOR DOOR MOTOR
PFP:27141
Removal and Installation
NJS0009F
REMOVAL
1.
Remove rear ventilator duct No. 1. Refer to
ATC-145, "Removal of Rear Ventilator Ducts"
2.
Remove mounting screws, and then remove rear ventilator door motor bracket.
3.
Remove mounting screws, and then remove rear ventilator door motor.
INSTALLATION
Installation is basically the reverse order of removal.
1.
Rear ventilator duct No. 1 (front
side)
2.
Rear ventilator door lever
3.
Screw
4.
Rear ventilator door motor bracket
5.
Rear ventilator door motor
6.
Rear ventilator duct No. 1 (rear side)
7.
Rear ventilator door
SJIA1353E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст