Infiniti Q45. Manual — part 133
IN-VEHICLE SENSOR
ATC-127
C
D
E
F
G
H
I
K
L
M
A
B
ATC
IN-VEHICLE SENSOR
PFP:27720
Removal and Installation
NJS00092
REMOVAL
1.
Remove instrument lower driver panel. Refer to
IP-10, "Removal and Installation"
2.
Disconnect in-vehicle sensor connector and aspirator duct.
3.
Remove mounting screw, and then remove in-vehicle sensor.
INSTALLATION
Installation is basically the reverse order of removal.
RJIA0312E
ATC-128
SUNLOAD SENSOR
SUNLOAD SENSOR
PFP:27721
Removal and Installation
NJS00093
REMOVAL
1.
Remove sunload sensor garnish.
2.
Disconnect sunload sensor connector, and then remove
sunload sensor.
INSTALLATION
Installation is basically the reverse order of removal.
RJIA0109E
INTAKE SENSOR
ATC-129
C
D
E
F
G
H
I
K
L
M
A
B
ATC
INTAKE SENSOR
PFP:27723
Removal and Installation
NJS00094
REMOVAL
1.
Remove heater & cooling unit assembly. Refer to
ATC-135, "HEATER & COOLING UNIT ASSEMBLY"
.
2.
Remove evaporator from heater & cooling unit assembly.
3.
Separate heater & cooling unit case.
4.
Remove intake sensor.
INSTALLATION
Installation is basically the reverse order of removal.
●
Mark mounting position of intake sensor bracket prior to removal so that the reinstalled sensor can be
located in the same position.
●
When recharging refrigerant, check for leaks.
SJIA1310E
ATC-130
BLOWER UNIT
BLOWER UNIT
PFP:27200
Removal and Installation
NJS00095
REMOVAL
1.
Remove glove box assembly. Refer to
IP-10, "Removal and Installation"
2.
Remove glove box cover, instrument lower cover and instrument panel bracket. Refer to
.
3.
Remove audio unit. Refer to
AV-52, "Removal and Installation of Audio Unit"
4.
Disconnect blower motor connector, intake door motor connector and auto amp. connector.
5.
Remove ECM with bracket attached.
6.
Remove blower unit mounting screws.
7.
Remove blower unit.
CAUTION:
Move blower unit rightward, and remove locating pins (2
parts) and joint. Then remove blower unit downward.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
Make sure locating pins (2 parts) are securely installed.
NOTE:
When attaching the blower unit, the work will be easier if the blower motor is removed first.
RJIA3204E
RJIA0314E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст