Infiniti Q45. Manual — part 326
VEHICLE INFORMATION AND INTEGRATED SWITCH SYSTEM /WITH NAVIGA-
TION SYSTEM
DI-171
C
D
E
F
G
H
I
J
L
M
A
B
DI
Disassembly and Assembly for Multifunction Switch
NKS001E0
DISASSEMBLY
1.
Remove the screws (7).
2.
Remove the switches.
ASSEMBLY
Assembly is the reverse order of disassembly.
1.
Multifunction switch
2.
Escutcheon
3.
Hazard switch
4.
Defroster, rear window defogger
switch
5.
Function switch
6.
Function switch
7.
Function switch
8.
TAPE and DISC switch
9.
A/C switch
10. Escutcheon
11. Radio switch
12. Escutcheon
13. Switch assembly
14. Escutcheon
15. Cluster lid C
PKIC4896E
DI-172
REAR VIEW MONITOR
REAR VIEW MONITOR
PFP:28260
System Description
NKS001E1
●
The rear view monitor is equipped to check the backward of the vehicle with display when A/T selector
lever is in reverse position.
●
The lines of vehicle sides and the distance from the rear end of the vehicle are provided on display as a
guide. It allows the driver to know the distance between the vehicle and a backward object, and the width
of the vehicle much easier.
POWER SUPPLY AND GROUND
Power is supplied at all time
●
through 15A fuse [No. 52, located in fuse, fusible link and relay block (J/B)]
●
to rear view camera control unit terminal 1.
When ignition switch is ACC or ON position, power is supplied
●
through 10A fuse [No. 21, located in fuse block (J/B) No. 1]
●
to rear view camera control unit terminal 2.
When ignition switch is ON or START position, power is supplied
●
through 10A fuse [No. 9, located in fuse block (J/B) No. 1]
●
to back-up lamp relay terminals 2 and 5.
Ground is supplied
●
to rear view camera control unit terminal 3
●
through grounds B217 and B256,
●
to rear view camera terminal 2
●
through grounds B217 and B256.
REAR VIEW CAMERA OPERATION
AV control unit (AV and NAVI control unit) switches the display to rear view camera image when input reverse
signal by AV communication line.
Display shows image from rear view camera image and rear view camera guideline.
SKIB0699E
REAR VIEW MONITOR
DI-173
C
D
E
F
G
H
I
J
L
M
A
B
DI
Rear View Camera Image
When A/T selector lever is reverse position, power is supplied
●
through backup lamp relay terminal 1
●
to A/T assembly terminal 7.
Then back-up lamp relay is energized
●
from backup lamp relay terminal 3
●
to rear view camera control unit terminal 4.
Then, rear view camera control unit is sent camera ON signal
●
through rear view camera control unit terminal 8
●
to rear view camera terminal 1.
An image taken by rear view camera is sent
●
through rear view camera terminals 3 and 4
●
to rear view camera control unit terminals 10 and 9.
Then an image is sent
●
through rear view camera control unit terminals 11 and 12
●
to display terminals 11 and 9.
Then composite synchronizing signal is sent
●
through rear view camera control unit terminal 14
●
to display terminal 10
●
for the display and the image.
An image of rear view will be projected on the display.
Rear View Camera Guide Line
When A/T selector lever is reverse position, power is supplied
●
through back-up lamp relay terminal 1
●
to A/T assembly terminal 7.
Then back-up lamp relay is energized
●
from back-up lamp relay terminal 3
●
to AV control unit terminal 19 (without NAVI)
●
to AV and NAVI control unit terminal 27 (with NAVI).
Then AV control unit (AV and NAVI control unit) is sent rear view camera guideline image
●
through AV control unit terminals 18, 21 and 24 (without NAVI)
●
through AV and NAVI control unit terminals 18, 21 and 15 (with NAVI)
●
to display terminals 1, 2 and 3.
Rear view camera guide line will be projected on the display.
DI-174
REAR VIEW MONITOR
Component Parts and Harness Connector Location
NKS001E2
SKIB0700E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст