Infiniti Q45. Manual — part 712
BULB SPECIFICATIONS
LT-185
C
D
E
F
G
H
I
J
L
M
A
B
LT
BULB SPECIFICATIONS
PFP:26297
Headlamp
NKS001AU
Exterior Lamp
NKS001AV
Interior Lamp/Illumination
NKS001AW
Item
Wattage (W)
Low
35 (D2S)
High
60 (HB3)
Item
Wattage (W)
Front fog lamp
51 (HB4)
Front combination lamp
Turn signal lamp
21 (amber)
Parking lamp (Clearance lamp)
5
Side marker lamp
5
Rear combination lamp
Stop/Tail lamp
LED
Turn signal lamp
21 (amber)
Back-up lamp
18
Side marker lamp
LED
Tail lamp
LED
Door mirror lamp
8
License plate lamp
5
High-mounted stop lamp
18
Item
Wattage (W)
Map lamp (Front personal light)
8
Console lamp (Console light)
2
Personal lamp (Rear personal light)
8
Step lamp
2.7
Vanity mirror lamp
1.4
Trunk room lamp
3.4
Ignition key hole illumination
1.4
Power window switch illumination
1.4
Glove box lamp
1.4
Cigarette lighter socket illumination
1.4
Ashtray illumination
1.4
Rear ashtray illumination
1.4
LT-186
BULB SPECIFICATIONS
LU-1
ENGINE LUBRICATION SYSTEM
B ENGINE
CONTENTS
C
D
E
F
G
H
I
J
K
L
M
SECTION
LU
A
LU
ENGINE LUBRICATION SYSTEM
PRECAUTIONS . . . . . . . . . . . . . . .. 2
Precautions for Liquid Gasket . . . . . . . . .. 2
LIQUID GASKET APPLICATION PROCEDURE
PREPARATION . . . . . . . . . . . . . . ... 3
Special Service Tools . . . . . . . . . . . ... 3
Commercial Service Tools . . . . . . . . . . 3
LUBRICATION SYSTEM . . . . . . . . . . . 4
Lubrication Circuit . . . . . . . . . . . . . 4
System Chart . . . . . . . . . . . . . . ... 5
ENGINE OIL . . . . . . . . . . . . . . . ... 6
Inspection . . . . . . . . . . . . . . . . . 6
Changing Engine Oil . . . . . . . . . . . . 7
OIL FILTER . . . . . . . . . . . . . . . . . 9
Removal and Installation . . . . . . . . . . .. 9
OIL PUMP . . . . . . . . . . . . . . . . . 10
Removal and Installation . . . . . . . . . . 10
Disassembly and Assembly . . . . . . . . . 11
SERVICE DATA AND SPECIFICATIONS (SDS) . .. 13
LU-2
PRECAUTIONS
PRECAUTIONS
PFP:00001
Precautions for Liquid Gasket
NBS001P6
LIQUID GASKET APPLICATION PROCEDURE
1.
Remove old liquid gasket adhering to the liquid gasket application surface and the mating surface.
●
Remove liquid gasket completely from the liquid gasket application surface, mounting bolts, and bolt
holes.
2.
Wipe the liquid gasket application surface and the mating surface with white gasoline (lighting and heating
use) to remove adhering moisture, grease and foreign materials.
3.
Attach liquid gasket tube to tube presser (SST).
Use Genuine RTV Silicone Sealant or equivalent. Refer to
GI-45, "RECOMMENDED CHEMICAL PRODUCTS AND
SEALANTS"
●
Within 5 minutes of liquid gasket application, install the mating
component.
●
If liquid gasket protrudes, wipe it off immediately.
●
Do not retighten mounting bolts or nuts after the installation.
●
After 30 minutes or more have passed from the installation, fill
engine oil and engine coolant.
PBIC2160E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст