Infiniti Q45. Manual — part 754
HYDRAULIC LINE
PS-33
C
D
E
F
H
I
J
K
L
M
A
B
PS
●
Apply Genuine Nissan PSF or equivalent to around the O-
ring (1), then install the eye-bolt (2) with the eye-joint
(assembled to high pressure hose) protrusion (A) facing
with pump side cutout, and then tighten it to the specified
torque after tightening by hand. Refer to
●
Never apply fluid to the hose (1) and tube (2).
●
Insert the hose (1) securely until it contacts the spool (A) of
the tube (2).
●
Install the clamp (3) to the hose (2) at dimension “L” from
the edge of the hose (2).
●
Confirm with mating marking that if it is in phase with the
hose and clamp, then correct if needs.
SGIA1598E
Dimension “L”
: 3 – 8 mm (0.12 – 0.31 in)
SGIA1600E
SGIA0563E
PS-34
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
PFP:00030
General Specifications
NGS0004D
Inspection and Adjustment
NGS0004E
STEERING WHEEL AXIAL END PLAY AND PLAY
Unit: mm (in)
STEERING WHEEL TURNING FORCE
Unit: N (kg, lb)
STEERING COLUMN LENGTH
Unit: mm (in)
STEERING ANGLE
Unit: Degree minute (Decimal degree)
RACK SLIDING FORCE
Unit: N (kg, lb)
Applied model
VK45DE
Steering gear model
PR26AF
Fluid capacity (Approx.)
(US qt, lmp qt)
1.0 (1-1/8, 7/8)
Relief oil pressure
kPa (kg/cm
2
, psi)
8,500 - 9,300 (88 - 94, 1,251 - 1,337)
Item
Standard
End play of the axial direction for steering wheel
0 (0)
Steering wheel play on the outer circumference
0 - 35 (0 - 1.38)
Item
Standard
Steering wheel turning force
36 (3.6, 8.0) or less
Item
Standard
Steering column length “L
1
”
Minimum
628 mm (24.72 in)
Neutral
643 mm (25.31 in)
Maximum
658 mm (25.91 in)
Steering column length “L
2
”
346.8 mm (13.65 in)
SST315B
Item
Standard
Inner wheel
Minimum
39
°
45
′
(39.75
°
)
Nominal
42
°
45
′
(42.75
°
)
Maximum
43
°
45
′
(43.75
°
)
Outer wheel
Nominal
33
°
50
′
(33.83
°
)
Item
Standard
Rack sliding force
255 - 294 (26.1 - 29.9, 57.4 - 66.0)
SERVICE DATA AND SPECIFICATIONS (SDS)
PS-35
C
D
E
F
H
I
J
K
L
M
A
B
PS
RACK STROKE
Unit: mm (in)
SOCKET SWING TORQUE AND ROTATING TORQUE
Swing Torque
Unit: N (kg, lb)
Rotating Torque
Unit: N·m (kg-m, in-lb)
SOCKET AXIAL END PLAY
Unit: mm (in)
Item
Standard
Rack neutral position, dimension “L”
Except for RAS models
68.5 (2.697)
RAS models
66.0 (2.598)
SGIA0629J
Item
Standard
Outer socket “P
1
”
4.81 - 45.7 (0.50 - 4.6, 1.09 - 10.2)
Inner socket “P
2
”
8.9 - 64 (0.91 - 6.5, 2.00 - 14.3)
SGIA1540E
Item
Standard
Outer socket
0.3 - 2.9 (0.03 - 0.29, 3 - 25)
Item
Standard
Outer socket
0.5 (0.02) or less
Inner socket
0.2 (0.008) or less
PS-36
SERVICE DATA AND SPECIFICATIONS (SDS)
INNER SOCKET LENGTH
Unit: mm (in)
Item
Standard
Inner socket length “L”
160 (6.30)
SGIA1512E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст