Infiniti Q45. Manual — part 329
REAR VIEW MONITOR
DI-183
C
D
E
F
G
H
I
J
L
M
A
B
DI
TKWM3763E
DI-184
REAR VIEW MONITOR
Terminals and Reference Value for Rear View Camera Control Unit
NKS001E5
Terminals and Reference Value for Display
NKS002JK
Refer to
DI-162, "Terminals and Reference Value for Display"
(with NAVI).
Refer to
DI-123, "Terminals and Reference Value for Display"
(without NAVI).
Terminal No.
(Wire color)
Item
Condition
Reference value
(Approx.)
(+)
(
−
)
Ignition
switch
Operation
1 (PU/W)
Ground
Battery power supply
OFF
–
Battery voltage
2 (OR/L)
ACC power supply
ACC
–
Battery voltage
3 (B/Y)
Ground
ON
–
0 V
4 (R/B)
Reverse signal input
ON
A/T selector lever “R” position
12 V
A/T selector lever in other than
“R” position
0 V
5 (L)
Rear view camera recogni-
tion signal
ON
–
0 V
8 (R/G)
Camera power output
ON
A/T selector lever “R” position
6 V
9
Camera image input (
−
)
ON
–
0 V
10 (W)
9
Camera image input (+)
ON
A/T selector lever “R” position
11
Ground
Composite ground
ON
–
0 V
12 (B)
11
Composite image output
ON
A/T selector lever “R” position
14 (W)
11
Composite image synchroni-
zation signal output
ON
A/T selector lever “R” position
SKIA4894E
SKIA4894E
SKIA5896E
REAR VIEW MONITOR
DI-185
C
D
E
F
G
H
I
J
L
M
A
B
DI
Side Distance Guideline Correction
NKS001E6
●
This mode is used to modify the side distance guidelines if they are dislocated from the rear view monitor
image, because of variations of body/camera mounting conditions.
1.
Create a correction line to modify the screen.
Draw lines on the backward of the vehicle passing through the
following points: 0.2 m (7.87 inch) from both sides of the vehicle,
and
●
*1: 0.5 m (1.64 feet)
●
*2: 1.0 m (3.28 feet)
●
*3: 2.0 m (6.56 feet)
●
*4: 3.0 m (9.84 feet)
from the rear end of the bumper.
2.
Turn ignition switch ON.
3.
Turn OFF the audio system.
4.
While pressing the “INFO” switch, turn volume control dial clock-
wise or counterclockwise for 30 clicks or more. (When self-diag-
nosis mode is activated, a short beep will be heard.)
●
To return to the previous screen, press “PREV” switch.
5.
The initial trouble diagnosis screen is displayed for selecting
“Confirmation/Adjustment” mode.
PKIA0354E
PKIB0256E
SKIA0381E
DI-186
REAR VIEW MONITOR
6.
Select “Rearview” in “CONFIRMATION/ADJUSTMENT”.
7.
Shift the A/T selector lever to “R” position.
8.
Using the joy stick, select the pattern closest to the prepared
correction line among the 6 guideline patterns, then press
“ENTER” button.
9.
Carefully adjust the center of the background vertically and hori-
zontally in the range of 8 - 8. Align it with the prepared line, and
press the “ENTER” button.
10. The adjustment is completed.
Trouble Diagnosis
NKS001E7
HOW TO PROCEED WITH TROUBLE DIAGNOSIS
1.
Confirm the symptom and customer complaint.
2.
Perform the preliminary inspection. Refer to
DI-187, "Preliminary Inspection"
3.
Understand the outline of system. Refer to
4.
Referring to trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to
.
5.
Does rear view monitor system operate normally? If it operates normally, GO TO 6. If not, GO TO 4.
6.
INSPECTION END
SKIA0361E
SKIB0701E
SKIB0702E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст