Infiniti Jx35 (2013 year). Manual — part 17

● Models with Navigation System

iPod®/USB

→ CD/DVD → Bluetooth® Audio →

iPod®/USB

Linking Intelligent Key (models with Navi-
gation System):

The audio settings can be memorized for each
Intelligent Key. For more details, see “Setting
memory function” in the “Predriving checks and
adjustments” section.

FM/AM/SAT radio operation

FM/AM band select:

Pressing the FM·AM button will change the band
as follows:

AM

→ FM1 → FM2 → AM

When the FM·AM button is pressed while the
ignition switch is in the ACC or ON position, the
radio will come on at the station last played.

The last station played will also come on when
the VOL/ON·OFF control knob is pressed ON.

If a compact disc is playing when the FM·AM
button is pressed, the compact disc will auto-
matically be turned off and the last radio station
played will come on.

The FM stereo indicator STEREO will illuminate
during FM stereo reception. When the stereo

broadcast signal is weak, the radio will automati-
cally change from stereo to monaural reception.

XM band select:

Pressing the XM button will change the band as
follows:

XM1*

→ XM2* → XM3* → XM1

When the XM button is pressed while the ignition
switch is in the ACC or ON position, the radio will
come on at the station last played.

The last station played will also come on when
the VOL/ON·OFF control knob is pressed ON.

*When the XM button is pressed, the satellite
radio reception will not be available unless an
optional satellite receiver and antenna are in-
stalled and a SiriusXM Satellite Radio service
subscription is active. Satellite radio is not avail-
able in Alaska, Hawaii and Guam.

If a compact disc is playing when the XM button
is pressed, the compact disc will automatically be
turned off and the last radio station played will
come on.

TUNE/FOLDER (Tuning) knob:

To

manually

tune

the

radio,

turn

the

TUNE/FOLDER knob to the right or left.

SEEK•CAT/TRACK tuning

button:

For AM or FM:
Press

the

SEEK•CAT/TRACK

button

or

to tune from high to low or low to high

frequencies and stop at the next broadcasting
station.

For XM:
Press

the

SEEK•CAT/TRACK

button

or

to go to the first channel of the previous

or next category.

During satellite radio reception, the following no-
tices will be displayed under certain conditions.

● NO SIGNAL (No signal is received while the

SAT tuner is connected)

● OFF AIR (Broadcasting signed off)
● CHECK ANTENNA (Antenna connection

error)

● LOADING (When the initial setting is per-

formed)

● UPDATING (When the satellite radio sub-

scription is not active)

4-80

Monitor, climate, audio, phone and voice recognition systems

SCAN tuning:

Press the SCAN button to stop at each broad-
casting station for 5 seconds. Pressing the
SCAN button again during this five second pe-
riod will stop scan tuning and the radio will remain
tuned to that station. If the SCAN button is not
pressed within 5 seconds, scan tuning moves to
the next station.

1 to 6 Station memory operations:

Six stations can be set for the AM band. Twelve
stations can be set for the FM band (6 for FM1, 6
for FM2). Eighteen channels can be set for the
satellite radio (6 for XM1, 6 for XM2, 6 for XM3).

1. Choose the radio band AM, FM1 or FM2

using the FM·AM select button, or choose
the satellite band XM1, XM2 or XM3 using
the XM button.

2. Tune to the desired station using manual,

SEEK or SCAN tuning. Press and hold any
of the desired station memory buttons (1 –
6) until the preset number is updated on the
display and the sound is briefly muted.

3. The channel indicator will then come on and

the sound will resume. Programming is now
complete.

4. Other buttons can be set in the same man-

ner.

If the battery cable is disconnected, or if the fuse
opens, the radio memory will be canceled. In that
case, reset the desired stations.

List (AM and FM)

Select the “List” key using the INFINITI controller
or touchscreen to see a list of the presets in the
AM, FM1 or FM2 preset banks.

Text (SiriusXM Satellite Radio) (models
without Navigation System):

Select the “Text” key with the INFINITI controller
and then press the ENTER button while the sat-
ellite radio is being played to display the text
information listed below:

● CH Name
● Category
● Name
● Title
● Other

Menu (SiriusXM Satellite Radio) (models
with Navigation System):

Select the “Menu” key using the INFINITI control-
ler or touchscreen to see a list of options:

● Preset List – Displays the list of presets.

Press and hold the touchscreen or ENTER
button on the INFINITI controller to save a
preset.

● Customize Channel List – deselect chan-

nels to skip while using the TUNE/FOLDER
knob.

LHA1375

Monitor, climate, audio, phone and voice recognition systems

4-81

● Favorite Artist & Songs

– Tags the current artist or song playing on

SiriusXM Satellite Radio as a favorite.

– Turn the Alert ON to indicate whenever a

favorite artist or song is playing on Siri-
usXM Satellite Radio. The audio system
must be playing Sirius XM Satellite Radio
for this feature to work.

– Delete a favorite artist or song.

● Categories – Displays a category list for

SiriusXM Satellite Radio. Select a category
to select the first channel for that category.

● Direct Tune – Tune to a channel by entering

the channel number.

Radio data system (RDS):

RDS stands for Radio Data System, and is a data
information service transmitted by some radio
stations on the FM band (not AM band). Cur-
rently, most RDS stations are in large cities, but
many stations are now considering broadcasting
RDS data.

RDS can display:

● Station call sign, such as “WHFR 98.3”.
● Station name, such as “The Groove”.

● Music or programming type such as “Clas-

sical”, “Country”, or “Rock”.

● Station specific text.

If the station broadcasts RDS information, the
text information is automatically displayed.

Compact disc (CD) player operation

Place the ignition in the ACC or ON position and
insert the compact disc into the slot with the label
side facing up. The compact disc will be guided
automatically into the slot and start playing.

If the radio is already operating, it will automati-
cally turn off and the compact disc will play.

If the system has been turned off while the com-
pact

disc

was

playing,

pressing

the

VOL/ON·OFF control knob will start the compact
disc.

DISC·AUX button:

When the DISC·AUX button is pressed with the
system off and the compact disc loaded, the
system will turn on and the compact disc will start
to play.

When the DISC·AUX button is pressed with the
compact disc loaded but the radio playing, the
radio will automatically be turned off and the
compact disc will start to play.

SEEK•CAT/TRACK button:

When

the

SEEK•CAT/TRACK

button

is

pressed

while a compact disc is playing,

the track being played returns to its beginning.
Press several times to skip back through tracks.
The compact disc will go back the number of
times the button is pressed.

When

the

SEEK•CAT/TRACK

button

is

pressed

while the compact disc is playing,

the next track will start to play from its beginning.
Press several times to skip through tracks. The
compact disc will advance the number of times
the button is pressed. (When the last track on the
compact disc is skipped through, the first track
will be played.)

The INFINITI controller can also be used to select
tracks when a CD is playing.

SEEK•CAT/TRACK

(Rewind and Fast

Forward) button:

Press

and

hold

the

SEEK•CAT/TRACK

button

to reverse the track as it is playing.

Press

and

hold

the

SEEK•CAT/TRACK

button

to fast forward the track as it is

playing. When the button is released, the com-
pact disc will return to normal play speed.

4-82

Monitor, climate, audio, phone and voice recognition systems

TUNE/FOLDER knob

While playing a CD with compressed audio files,
turn the TUNE/FOLDER knob right or left to play
the next or previous folder.

Text (models without Navigation System):

Select the “Text” key using the INFINITI controller
and then press the ENTER button while the CD is
being played to display the music information
below.

CD:

● Disc title
● Track title

CD with compressed audio files:

● Folder title
● File title
● Song title
● Album title
● Artist

Menu (models with Navigation System):

When the “Menu” key on the display is selected
while the CD is being played, the menu screen
will be displayed. The following menu options are
available.

● Folder List (for CD with compressed audio

files)
Displays the folder list.

● Track List

Displays the track list.

● Play Mode

Select a play mode from the following items.

– Normal

– 1 Folder Repeat (for CD with com-

pressed audio files)

– 1 Track Repeat

– 1 Disc Random

– 1 Folder Random (for CD with com-

pressed audio files)

RDM·RPT (random and repeat) button:

Press the RDM·RPT button while a compact disc
is playing to change the play pattern as follows:

CD:

Normal

→ 1 Track Repeat → 1 Disc Random →

Normal

CD with compressed audio files:

Normal

→ 1 Folder Repeat → 1 Track Repeat →

1 Disc Random

→ 1 Folder Random → Normal

Normal: No repeat or random pattern is applied.
1 Track Repeat: the current track playing will be
repeated.
1 Disc Random: all tracks will be played ran-
domly.
1 Folder Repeat: the folder currently being ac-
cessed will be repeated.
1 Folder Random: the tracks in the current folder
being accessed will be played randomly.

CD EJECT button:

When the

button is pressed with the com-

pact disc loaded, the compact disc will be
ejected.

When the

button is pressed while the

compact disc is being played, the compact disc
will eject and the system will turn off.

Monitor, climate, audio, phone and voice recognition systems

4-83

Front AUX (auxiliary) input jacks (inside
center console)

The front auxiliary input jacks are located inside
the center console

䊊

1

. NTSC compatible de-

vices such as video games, camcorders and
portable video players can be connected to the
auxiliary input jacks. Audio devices, such as some
MP3 players, can also be connected to the sys-
tem through the auxiliary input jacks.

The auxiliary input jacks are color coded for iden-
tification purposes:

● Red – right channel audio input
● White – left channel audio input
● Yellow – video input

Before connecting a device to the auxiliary input
jacks, turn off the power of the portable device.

With a compatible device connected to the aux-
iliary input jacks, press the DISC·AUX button
repeatedly until the AUX mode appears in the
display. The output from the device will be played
through the display (when the vehicle is in the (P)
Park position and the parking brake engaged)
and audio system.

1.

Left rear passenger’s headphone jack

2.

Right rear passenger’s headphone jack

3.

Right rear passenger’s power on button /
volume control knob

4.

Rear auxiliary input jacks

5.

Left rear passenger’s power on button /
volume control knob

LHA2140

LHA2135

4-84

Monitor, climate, audio, phone and voice recognition systems

Rear AUX (auxiliary) input jacks (on back
of center console)

The rear auxiliary input jacks are located on the
back of the center console. NTSC compatible
devices such as video games, camcorders and
portable video players can be connected to the
auxiliary input jacks. Audio devices, such as some
MP3 players, can also be connected to the sys-
tem through the auxiliary input jacks.

The auxiliary input jacks are color coded for iden-
tification purposes:

● Red – right channel audio input
● White – left channel audio input
● Yellow – video input

Before connecting a device to the auxiliary input
jacks, turn off the power of the portable device.

When headphones are plugged into the rear
jacks, sound can be turned on by pressing the
volume control knob and then turning to increase
or decrease the volume.

AUX settings

Select the “Menu” key using the INFINITI control-
ler.

The display mode can be set to Normal, Wide or
Cinema. The volume setting can be set to Low,
Medium or High.

For more information about the “Rear” key, see
“Rear display settings” in this section.

Additional features

For more information about the iPod® player
available with this system, see “iPod® player
operation with Navigation System” in this section.

For more information about the USB interface
available with this system, see “USB interface
(models with Navigation System)” in this section.

For more information about the Bluetooth®
streaming audio feature available with this sys-
tem, see “Bluetooth® streaming audio” in this
section.

LHA2150

LHA1394

Monitor, climate, audio, phone and voice recognition systems

4-85

DIGITAL VERSATILE DISC (DVD)
PLAYER OPERATION (models with
Navigation System)

Precautions

Start the engine when using the DVD entertain-
ment system.

Movies will not be shown on the front display
while the vehicle is in any drive position to reduce
driver distraction. Audio is available when a movie
is played. To view movies on the front display,
stop the vehicle in a safe location, move the shift
selector to the P (Park) position and apply the
parking brake.

WARNING

● The driver must not attempt to operate

the DVD system or wear the head-
phones while the vehicle is in motion so
that full attention may be given to ve-
hicle operation.

● Do not attempt to modify the system to

display a movie on the front screen
while the vehicle is being driven. Doing
so may distract the driver and may
cause a collision and serious personal
injury or death.

CAUTION

● Only operate the DVD while the vehicle

engine is running. Operating the DVD
for extended periods of time with the
engine OFF can discharge the vehicle
battery.

● Do not allow the system to get wet.

Excessive moisture such as spilled liq-
uids

may

cause

the

system

to

malfunction.

● While playing VIDEO-CD media, this

DVD player does not guarantee com-
plete functionality of all VIDEO-CD
formats.

Display settings

To adjust the front display mode, press the SET-
TING button while the DVD is playing. Select the
“Others” key with the INFINITI controller or with
the touchscreen, then select the “Display” key.

To adjust the display ON/OFF, brightness, tint,
color and contrast, select the “Display Adjust-
ment” key with the INFINITI controller or with the
touchscreen and then select the key of the set-
ting you wish to adjust. After the desired changes
have been made, press the BACK button to save
the settings.

Playing a DVD

DISC-AUX button

Park the vehicle in a safe location for the front
seat occupants to operate the DVD drive while
watching the images.

Press the DISC-AUX button until the DVD mode
is active on the display.

When a DVD is loaded, it will be replayed auto-
matically.
The operation screen will be turned on when the
DISC-AUX button is pressed while a DVD is
playing. The operation screen will turn off auto-
matically after a period of time. To turn it on again,
press the DISC-AUX button.

LHA2165

4-86

Monitor, climate, audio, phone and voice recognition systems

DVD operation keys

When the DVD is playing without the operation
screen being shown, you may use the touch-
screen to select items from the displayed video.
You may also use the INFINITI controller to select
an item from the displayed video. When the op-
eration screen is being shown, use the INFINITI
controller or the touchscreen to select an item
from the displayed menus.

PAUSE:

Select the

key to pause the DVD. To re-

sume playing the DVD, use the

key.

PLAY:

Select the

key to start playing the DVD or

resume playing the DVD after it has been paused.

STOP:

Select the

key to stop playing the DVD.

NEXT/PREVIOUS
CHAPTER:

Select the

key to skip the chapter(s) of the

disc forward. Select the

key to skip the

chapter(s) of the disc backward. The chapters

will advance forward or backward the number of
times the respective key is touched or selected
with the INFINITI controller.

CM SKIP:

This function is only for DVD-VIDEO and DVD-

VR. Select the

or

key to fast forward

or rewind a set interval of time based on the CM
settings. For more information, see “DVD set-
tings” in this section.

Top Menu:

When the “Top Menu” key is selected while the
DVD is playing, the top menu specific to each
disc will be displayed. For details, see the instruc-
tions attached to the disc.

DVD settings

Select the “Settings” key to adjust the following
settings:

● Key (DVD-VIDEO)

Displays the operation keys for the specific
DVD menu.

– Select the directional keys to move the

cursor on the DVD menu.

– Select the “Enter” key to fix the selected

menu item.

– Select the “Move” key to move the loca-

tion of the operation keys on the screen.

– Select the “Back” key to return to the

previous menu screen.

– Select the “Hide” key to hide the opera-

tion keys.

● Title Menu (DVD-VIDEO)

Some menus specific to each disc will be
shown. For details, see the instructions at-
tached to the disc.

● Title Search (DVD-VIDEO, DVD-VR)

The scene with the specified title will be
displayed the number of times the “+” or “-”
side is selected.

● Group Search (VIDEO CD)

The scene with the specified group will be
displayed the number of times the “+” or “-”
side is selected.

● 10 Key Search (DVD-VIDEO, VIDEO CD,

CD-DA, DVD-VR)
Select the “10 Key Search” key to open the
number entry screen. Input the number you
want to search for and select the “OK” key.
The specified Title/Chapter or Group/Track
will be played.

Monitor, climate, audio, phone and voice recognition systems

4-87

● Surround Information
● Angle (DVD-VIDEO)

If the DVD contains different angles (such as
moving images), the current image angle
can be switched to another one. Select the
“Angle” key and use the “+” or “-” key to
change the angle.

● Angle Mark (DVD-VIDEO)

When this item is turned on, an angle mark
will be shown on the bottom of the screen if
the scene can be seen from a different angle.

● Menu Skip (DVD-VIDEO)

DVD menus are automatically configured
and the contents will be played directly
when the “Menu Skip” key is turned on. Note
that some discs may not be played directly
even if this item is turned on.

● CM Skip (DVD-VIDEO)

Select the “CM Skip” key to choose the
setting time for CM backward and forward
operations. Use the “+” or “-” key to choose
a setting time of 15, 30 or 60 seconds.

● DRC (DVD-VIDEO, DVD-VR)

DRC (Dynamic Range Compression) auto-
matically adjusts the soundtrack volume
level to maintain a more even sound to the
speakers.

● DOWN MIX
● DVD Language (DVD-VIDEO, VIDEO CD)

Select the “DVD Language” key to open the
number entry screen. Input the number cor-
responding to the preferred language and
select the “OK” key. The DVD top menu
language will be changed to the one speci-
fied.

● Display

Adjust the image quality of the screen by
selecting the preferred adjustment items.

● Audio

Choose the preferred language for the au-
dio.

● Subtitle (DVD-VIDEO, DVD-VR)

Choose the preferred language for the sub-
titles.

● Display Mode (DVD-VIDEO, VIDEO CD,

DVD-VR)
Choose from the “Full”, “Wide”, “Normal” or
“Cinema” mode.

● Title List (DVD-VR)

Choose the preferred title from the list.

● Play Mode

Choose the preferred play mode. The avail-
able options are “Normal” and “1 Chapter
Repeat”.

● PG/PL Mode (DVD-VR)

Choose from the “PG” or “PL” mode.

LHA2166

4-88

Monitor, climate, audio, phone and voice recognition systems

USB INTERFACE

Connecting a device to the USB input
jack

CAUTION

● Depending on size and shape of USB

device, the console lid may not fully
close. Do not force console lid closed
as this may damage USB device.

● Do not force the USB device into the

USB port. Inserting the USB device
tilted or up-side-down into the port may
damage the USB device and the port.
Make sure that the USB device is con-
nected correctly into the USB port.
(Some USB devices come with a
mark as a guide. Make sure that the
mark is facing the correct direction be-
fore inserting the device.)

● Do not locate objects near the USB de-

vice to prevent the objects from leaning
on the USB device and the port. Pres-
sure from the objects may damage the
USB device and the port.

The USB input jack is located in the center con-
sole. Insert the USB device into the jack

䊊

1

.

When a compatible storage device is plugged
into the jack, compatible audio and video files on
the storage device can be played through the
vehicle’s audio system and center display screen.

File selection (models with Navigation
System)

When there are both audio and movie files in the
USB memory, the mode select screen is dis-
played. Use the touchscreen or the INFINITI con-
troller to select the preferred type of file. When
there is only type of file in the USB memory, that
audio or movie operation screen is displayed and
starts to play.

When you play a file with limited playing time, the
confirmation screen will be displayed before
starting to play the file. Confirm the playing time
and select “Yes” to start playing.

LHA2141

LHA1378

Monitor, climate, audio, phone and voice recognition systems

4-89

Audio file operation

DISC•AUX button:

Place the ignition switch in the ON or ACC
position and press the DISC•AUX button to
switch to the USB input mode. If another audio
source is playing and a USB memory device is
inserted, press the DISC•AUX button repeatedly
until the center display changes to the USB
memory mode.

If the system has been turned off while the USB
memory was playing, push the ON-OFF/VOL
control knob to restart the USB memory.

SEEK•CAT/TRACK

(Reverse or Fast Forward)

button:

Press

and

hold

the

SEEK•CAT/TRACK

button

(rewind) or SEEK•CAT/TRACK

button

(fast forward) for 1.5 seconds while

an audio file on the USB device is playing to
reverse or fast forward the track being played.
The track plays at an increased speed while
reversing or fast forwarding. When the button is
released, the audio file returns to normal play
speed.

SEEK•CAT/TRACK

button:

Press

the

SEEK•CAT/TRACK

button

while an audio file on the USB device is playing to
return to the beginning of the current track. Press
the SEEK•CAT/TRACK button

several

times to skip backward several tracks.

Press

the

SEEK•CAT/TRACK

button

while an audio file on the USB device is playing to
advance one track. Press the SEEK•CAT/TRACK
button

several times to skip forward sev-

eral tracks. If the last track in a folder on the USB
device is skipped, the first track of the next folder
is played.

Folder selection:

To change to another folder in the USB memory,
turn the TUNE/FOLDER knob or choose a folder
displayed on the screen.

RPT/RDM button:

When the RPT/RDM button is pressed while the
USB memory is playing, the play pattern can be
changed as follows:

Normal

→ 1 Folder Repeat → 1 Track Repeat →

All Random

→ 1 Folder Random → Normal

Text (models without Navigation System):

Select the “Text” key using the INFINITI controller
and then press the ENTER button while a USB
memory is being played to list the music informa-
tion on the screen.

● Folder title
● File title
● Song title
● Album title
● Artist

4-90

Monitor, climate, audio, phone and voice recognition systems

Menu (models with Navigation System):

There are some options available during play-
back. Select one of the following that are dis-
played on the screen, if necessary. Refer to the
following information for each item.

● Movie Playback

Switch to the movie playback mode. This
item is displayed only when the USB
memory contains movie files.
The shift selector must be in Park (P) with
the parking brake engaged to watch movies
from a USB device.

● Folder List/Track List

Displays the folder or track list. The “Movie
Playback” key is also displayed in this list
screen and enables you to switch to the
movie playback mode.

● Play Mode

Choose the preferred play mode using the
INFINITI controller or the touchscreen.

Movie file operation (models with
Navigation System)

Park the vehicle in a safe location for the
front seat occupants to operate the USB
memory while watching the images.

DISC-AUX button:

When the DISC-AUX button is pushed with the
system off and the USB memory inserted, the
system will turn on. If another audio source is
playing and the USB memory is inserted, press
the DISC-AUX button repeatedly until the center
display changes to the USB memory mode.

LHA1294

LHA1379

Monitor, climate, audio, phone and voice recognition systems

4-91

Operation keys:

To operate the USB memory, select the desired
key displayed on the display screen.

●

Pause:

Select the

key to pause the movie file.

To resume playing the movie file, use
the

key.

●

Play:

Select the

key to start playing the

movie file or resume the movie file if it has
been paused.

●

Stop:

Select the

key to stop playing the

movie file.

●

Next Chapter/Fast Forward:

Select the

key to skip the chapter(s)

of the disc forward. The chapters will ad-
vance the number of times the key is se-
lected. Press and hold the key to fast for-
ward the chapter.

●

Previous Chapter/Rewind:

Select the

key to skip the chapter(s)

of the disc backward. The chapters will go
back the number of times the key is selected.
Press and hold the key to rewind the chap-
ter.

List:

Select the “List” key on the movie file operation
screen to display the file list.

Settings:

Select the “Settings” key to adjust the following
settings:

● Audio File Playback

Switch to the audio playback mode. This
item is displayed only when the USB
memory contains audio files.

● Play Mode

Choose between the “Normal” or “1 Track
Repeat” play modes.

LHA1380

4-92

Monitor, climate, audio, phone and voice recognition systems

● 10 Key Search

Select the “10 Key Search” key to open the
number entry screen. Input the number you
want to search for and the specified file or
folder will be played.

● Display

Adjust the image quality of the screen.

● DRC

DRC (Dynamic Range Compression) auto-
matically adjusts the soundtrack volume
level to maintain a more even sound to the
speakers.

● Audio

Choose the preferred language of the audio.

● Subtitle

Choose the preferred language of the sub-
titles.

● Display Mode

Choose between the “Normal”, “Wide”,
“Cinema” or “Full” display modes.

iPod®* PLAYER OPERATION

Connecting iPod®

CAUTION

● Depending on size and shape of the

iPod® and iPod® cable, the console lid
may not fully close. Do not force con-
sole lid closed as this may damage the
iPod® and iPod® cable.

● Do not force the iPod® cable into the

USB port. Inserting the USB device
tilted or up-side-down into the port may
damage the iPod® cable and the port.
Make sure that the iPod® cable is con-
nected correctly into the USB port.
(Some iPod® cables come with a
mark as a guide. Make sure that the
mark is facing the correct direction be-
fore inserting the iPod® cable.)

● Do not locate objects near the iPod®

cable to prevent the objects from lean-
ing on the iPod® cable and the port.
Pressure from the objects may damage
the iPod® cable and the port.

To connect an iPod® to the vehicle so that the
iPod® can be controlled with the audio system
controls and display screen, use the USB jack

䊊

1

located in the center console. Connect the
iPod®-specific end of the cable to the iPod®
and the USB end of the cable to the USB jack on
the vehicle. If your iPod® supports charging via a
USB connection, its battery will be charged while
connected to the vehicle with the ignition switch
in the ACC or ON position.

While connected to the vehicle, the iPod® can
only be operated by the vehicle audio controls.

LHA2141

Monitor, climate, audio, phone and voice recognition systems

4-93

To disconnect the iPod® from the vehicle, re-
move the USB end of the cable from the USB
jack on the vehicle, then remove the cable from
the iPod®.

* iPod® is a trademark of Apple Inc., registered in
the U.S. and other countries.

Compatibility

The following models are compatible:

● iPod® 5th Generation (firmware version

1.2.3 or later)

● iPod® Classic (firmware version 1.1.1 or

later)

● iPod® Touch (firmware version 2.0.0 or

later)*

● iPod® Nano - 1st generation (firmware ver-

sion 1.3.1 or later)

● iPod® Nano - 2nd generation (firmware ver-

sion 1.1.3 or later)

● iPod® Nano - 3rd generation (firmware ver-

sion 1.1.3 or later)

● iPod® Nano - 4th generation (firmware ver-

sion 1.0.4 or later)

● iPod® Nano - 5th generation (firmware ver-

sion 1.0.1 or later)

* Some features of this iPod® may not be fully
functional.

Make sure that your iPod® firmware is updated to
the version indicated above.

Audio main operation

Place the ignition switch in the ACC or ON
position. Press the DISC·AUX button repeatedly
to switch to the iPod® mode.

If the system has been turned off while the iPod®
was playing, pressing the VOL/ON·OFF control
knob will start the iPod®.

DISC·AUX button:

When the DISC·AUX button is pressed with the
system off and the iPod® connected, the system
will turn on. If another audio source is playing and
the iPod® is connected, press the DISC·AUX
button repeatedly until the center display
changes to the iPod® mode.

LHA1397

4-94

Monitor, climate, audio, phone and voice recognition systems

Interface:

The interface for iPod® operation shown on the
vehicle center display is similar to the iPod®
interface. Use the INFINITI controller and the
BACK button to play the iPod® with your favorite
settings. The touchscreen can also be used to
control your favorite settings.

The following items can be chosen from the menu
list screen. For further information about each
item, see the iPod® Owner’s Manual.

● Now Playing
● Playlists
● Artists

● Albums
● Songs
● Podcasts
● Genres
● Composers
● Audiobooks
● Shuffle Songs
● Play Mode

The following keys shown on the screen are also
available:

● MENU: returns to the previous screen.
●

: plays/pauses the music selected.

Play mode:

While the iPod® is playing, touch the “Menu” key
to display the iPod® menu. Touch the “Play
Mode” key to display the Play Mode screen and
adjust the settings for Shuffle, Repeat and Audio-
books. For further information about each item,
see the iPod® Owner’s Manual.

SEEK•CAT/TRACK buttons:

When

the

SEEK•CAT/TRACK

button

is

pressed

or

for less than 1.5 sec-

onds while the iPod® is playing, the next track or
the beginning of the current track on the iPod®
will be played.

LHA1398

LHA1315

Monitor, climate, audio, phone and voice recognition systems

4-95