Infiniti G37 Coupe. Manual — part 61
ADP-238
< ON-VEHICLE REPAIR >
SEAT MEMORY SWITCH
SEAT MEMORY SWITCH
Exploded View
INFOID:0000000001693808
Removal and Installation
INFOID:0000000001693809
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Disconnect battery negative terminal.
2.
Remove front door finisher (1). Refer to
.
3.
Press pawls and remove seat memory switch (2) from front door
finisher (1).
INSTALLATION
Install in reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
:
Pawl
JMJIA0197ZZ
POWER SEAT SWITCH
ADP-239
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
POWER SEAT SWITCH
Exploded View
INFOID:0000000001693810
.
Removal and Installation
INFOID:0000000001693811
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove seat cushion outer finisher (1). Refer to
2.
Remove screws (A).
3.
Remove power seat switch (2) from seat cushion outer finisher
(1).
INSTALLATION
Install in reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
JMJIA0319JP
ADP-240
< ON-VEHICLE REPAIR >
SIDE SUPPORT SWITCH
SIDE SUPPORT SWITCH
Exploded View
INFOID:0000000001693812
Removal and Installation
INFOID:0000000001693813
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove seat cushion outer finisher (1). Refer to
SE-152, "Removal and Installation"
2.
Remove screws (A).
3.
Remove side support switch (2) from seat cushion outer finisher.
INSTALLATION
Install in reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
JMJIA0192ZZ
TILT&TELESCOPIC SWITCH
ADP-241
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
TILT&TELESCOPIC SWITCH
Exploded View
INFOID:0000000001693814
.
Removal and Installation
INFOID:0000000001693815
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Disconnect battery negative terminal.
2.
Remove steering column mask (1). Refer to
IP-12, "Removal and Installation"
.
3.
Press pawls and remove tilt & telescopic switch (2) from steering
column mask (1).
INSTALLATION
Install in reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
:
Pawl
JMJIA0912ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст