Infiniti G37 Coupe. Manual — part 1135
U1010 CONTROL UNIT (CAN)
SEC-37
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
U1010 CONTROL UNIT (CAN)
DTC Logic
INFOID:0000000001726789
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000001726790
1.
REPLACE BCM
When DTC [U1010] is detected, replace BCM.
>> Replace BCM.
Special Repair Requirement
INFOID:0000000001726791
1.
REQUIRED WORK WHEN REPLACING BCM
Initialize control unit. Refer to CONSULT-III operation manual NATS-IVIS/NVIS.
>> Work end.
DTC
CONSULT-III display de-
scription
DTC Detection Condition
Possible cause
U1010
CONTROL UNIT (CAN)
BCM detected internal CAN communication circuit malfunction.
BCM
SEC-38
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
P1610 LOCK MODE
P1610 LOCK MODE
Description
INFOID:0000000001700118
When the starting operation is carried more than five times consecutively under the following conditions, NATS
will shift to the mode which prevents the engine from being started.
• Unregistered Intelligent Key is used.
• BCM or ECM's malfunctioning.
DTC Logic
INFOID:0000000001700119
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Turn ignition switch ON.
2.
Check “Self diagnostic result” with CONSULT-III.
Is DTC detected?
YES
>> Go to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000001700120
1.
CHECK ENGINE START FUNCTION
1.
Perform the check for DTC except DTC P1610.
2.
Use CONSULT-III to erase DTC after fixing.
3.
Turn ignition switch OFF.
4.
Turn ignition switch ON when registered Intelligent Key insert into key slot and wait for 5 seconds.
5.
Return the ignition switch OFF and wait 5 seconds.
6.
Repeat steps 4 and 5 twice (total of 3 cycles).
7.
Check that engine can start when registered Intelligent Key insert into key slot.
>> INSPECTION END
DTC No.
Trouble diagnosis
name
DTC detecting condition
Possible cause
P1610
LOCK MODE
When the starting operation is carried out
five or more times consecutively under the
following conditions.
• Unregistered Intelligent Key
• BCM or ECM's malfunctioning.
—
P1611 ID DISCORD, IMMU-ECM
SEC-39
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
P1611 ID DISCORD, IMMU-ECM
Description
INFOID:0000000001699933
BCM performs the ID verification with ECM that allows the engine to start. Start the engine if the ID is OK.
ECM prevents the engine from starting if the ID is not registered. BCM starts the communication with ECM if
ignition switch is turned ON.
DTC Logic
INFOID:0000000001699934
DTC DETECTION LOGIC
NOTE:
• If DTC B1611 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
• If DTC B1611 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Turn ignition switch ON under the following conditions.
A/T models
-
A/T selector lever is in the P or N position
-
Do not depress brake pedal
M/T models
-
Do not depress clutch pedal
2.
Check “Self diagnostic result” with CONSULT-III.
Is DTC detected?
YES
>> Go to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000001726271
1.
PERFORM INITIALIZATION
Perform initialization with CONSULT-III. Re-register all Intelligent Keys.
For initialization and registration of Intelligent Key. Refer to “CONSULT-III Operation Manual NATS-IVIS/
NVIS”.
Can the system be initialized and can the engine be started with re-registered Intelligent Key?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-79, "Removal and Installation"
2.
Perform initialization with CONSULT-III.
For initialization, refer to “CONSULT-III Operation Manual NATS-IVIS/NVIS”.
Can the system be initialized and can the engine be started with re-registered Intelligent Key?
YES
>> INSPECTION END
NO
>> GO TO 3.
3.
CHECK INTERMITTENT INCIDENT
GI-38, "Intermittent Incident"
.
DTC No.
Trouble diagnosis
name
DTC detecting condition
Possible cause
P1611
ID DISCORD, IMMU-
ECM
The ID verification results between BCM and ECM
are NG. The registration is necessary.
• BCM
• ECM
SEC-40
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
P1611 ID DISCORD, IMMU-ECM
>> INSPECTION END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст