Infiniti G37 Coupe. Manual — part 1123
SE-160
< ON-VEHICLE REPAIR >
REAR SEAT
REAR SEAT
Exploded View
INFOID:0000000001694184
REAR SEAT
Removal and Installation
INFOID:0000000001694185
REMOVAL
CAUTION:
1.
Seatback board
2.
Seatback trim
3.
Seatback pad
4.
Seatback lock assembly
5.
Seatback lock cable
6.
Seatback frame
7.
Center tray
8.
Cup holder
9.
Seat cushion trim
10. Seat cushion pad
11.
Seatback side bracket
12. Seat cushion hook
13. Seat striker cover
14. Seat striker
15. Seat control lever escutcheon
16. Seatback control cable
Refer to
for symbols in the figure.
JMJIA0925GB
REAR SEAT
SE-161
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the seat cushion.
• Pull the seat cushion up, and then remove the seat cushion
from the seat cushion hook.
• Remove the seat cushion from the vehicle.
2.
Remove the seatback.
• Remove the seatback control cable. Refer to
SE-163, "Removal and Installation"
• Remove the seatback mounting bolt.
• Remove the seatback frame the vehicle.
3.
Remove the seatback side bracket.
• Remove the seatback side bracket mounting nuts.
• Remove the seatback side bracket from the vehicle.
4.
Remove the seat striker.
• Remove the seat striker cover.
• Remove the seat striker mounting bolt.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
Disassembly and Assembly
INFOID:0000000001694186
SEATBACK
Disassembly
1.
Remove the seatback board.
Remove the clip.
2.
Remove the seatback trim and seatback pad.
• Remove the hog rings, and remove the seatback retainer.
• Remove the hog rings to separate the seatback trim and seatback pad.
3.
Remove the seatback lock cable.
• Remove the mounting bolt and cable clamp.
• Remove the seatback lock cable from the seatback frame.
4.
Remove the seatback lock assembly.
• Remove the seatback lock assembly mounting bolt.
• Remove the seatback lock assembly from the seatback frame.
Assembly
Assemble in the reverse order of disassembly.
PIIB8352J
: Clip
JMJIA0941ZZ
SE-162
< ON-VEHICLE REPAIR >
REAR SEAT
CAUTION:
Install the hog rings of seatback trim in position, and then securely connect the trim or trim cord with
the seatback frame.
SEAT CUSHION
Disassembly
1.
Remove the center tray.
• Remove the clip (A) from the seat cushion backside, and then
remove pawls when pulling the center tray (1).
• Remove the center tray from the seat cushion assembly.
2.
Remove the seat cushion trim and seat cushion pad.
Remove the hog rings to separate the seat cushion trim and seat cushion pad.
Assembly
Assemble in the reverse order of disassembly.
CAUTION:
Install the hog rings of seat cushion trim in position, and then securely connect the trim or trim cord
with the seat cushion pad wire.
JMJIA0944ZZ
SEATBACK CONTROL CABLE
SE-163
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
SEATBACK CONTROL CABLE
Exploded View
INFOID:0000000001838109
.
Removal and Installation
INFOID:0000000001838111
REMOVAL
1.
Remove the trunk front finisher upper. Refer to
INT-27, "Removal and Installation"
2.
Remove the seatback control cable.
• Fold the seatback before.
• Remove the clip (A), and then pull up the seatback lower part.
• Remove the seatback control cable (1) from the seatback
frame.
• Remove the seatback control cable mounting nut (A).
• Remove the seatback control cable (1) from the vehicle.
INSTALLATION
Install in the reverse order of removal.
JMJIA0942ZZ
JMJIA0943ZZ
JMJIA0926ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст