Infiniti G37 Coupe. Manual — part 155
AV
MULTI AV SYSTEM
AV-373
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Component Parts Location
INFOID:0000000001558772
1.
Center speaker
2.
Tweeter LH
3.
Door squawker LH
4.
Door woofer LH
5.
Rear speaker LH
6.
Antenna amp.
7.
BOSE amp.
8.
Woofer amp.
9.
Rear woofer LH
10. Rear view camera
11. Camera control unit
12. Rear woofer RH
13. Rear speaker RH
14. Satellite radio antenna
15. Door woofer RH
16. Door squawker RH
17. Tweeter RH
18. Microphone
19. GPS antenna
20. iPod adapter
21. Steering switch
22. Steering angle sensor
23. Preset switch
24. Auxiliary input jacks
25. iPod connector
26. AV control unit
27. Multifunction switch
28. Display unit
A.
Within rear pillar finisher LH
B.
Trunk room LH
C.
Trunk room RH
D.
Instrument panel rear side
E.
Rear view of the display
F.
Spiral cable part
JPNIA0468ZZ
AV-374
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
MULTI AV SYSTEM
Component Description
INFOID:0000000001558773
Part name
Description
AV CONTROL UNIT
• Integrates hard disk drive (HDD) allowing map data and music data to be
stored.
• It is the master unit of the MULTI AV system, and it is connected to each con-
trol unit by communication. It operates each system according to communi-
cation signals from the AV control unit.
• The AV control unit includes the audio, hands-free phone, voice control, nav-
igation, satellite radio, and vehicle information functions.
• It is connected to ECM and unified meter and A/C amp. via CAN communi-
cation to obtain necessary information for the vehicle information function.
• It is connected to BCM via CAN communication transmitting/receiving for the
vehicle settings function.
• It inputs the illumination signals that are required for the display dimming con-
trol.
• It inputs the signals for driving status recognition (vehicle speed, reverse and
parking brake).
• Update of map data is performed with the CONSULT-III and the applicable
cable.
DISPLAY UNIT
• Display image is controlled by the serial communication from AV control unit.
• RGB image signal is input from AV control unit (RGB, RGB area and RGB
synchronizing). Auxiliary image signal is input from the auxiliary input jack.
Camera image signal is input from camera control unit.
• Synchronize signal (HP, VP) is output to AV control unit.
• Touch panel function can be operated for each system by touching a display
directly.
BOSE AMP.
Inputs power (amp ON) and sound signal from AV control unit, and outputs
sound signal to woofer amp. and each speaker.
WOOFER AMP.
Inputs power (amp ON) and sound signal from BOSE amp., and outputs sound
signal to each woofer.
DOOR WOOFER
• Outputs sound signal from BOSE amp.
• Outputs low-pitched sound.
DOOR SQUAWKER
• Outputs sound signal from BOSE amp.
• Outputs midrange sound.
REAR SPEAKER
• Outputs sound signal from BOSE amp.
• Outputs high, mid and low range sounds.
TWEETER
• Outputs sound signal from BOSE amp.
• Outputs high range sound.
CENTER SPEAKER
• Outputs sound signal from BOSE amp.
• Outputs high, mid and low range sounds.
REAR WOOFER
• Outputs sound signal from woofer amp.
• Outputs low-pitched sound.
MULTIFUNCTION SWITCH
• Operation panel is equipped with the centralized switch where audio, auxilia-
ry input and navigation operations are integrated.
• Connected with preset switch via cable, and operation signal is transmitted
to AV control unit via AV communication.
PRESET SWITCH
• Operation panel is equipped with the centralized switch where audio and air
conditioner operations are integrated.
• Connected with multifunction switch via cable, and operation signal is trans-
mitted to AV control unit via AV communication.
• The CD ejection operating signal is performed by hardwire.
CAMERA CONTROL UNIT
• Camera image signal is input from rear view camera. Camera image signal
output to display.
• Power (camera ON signal) is transmitted to rear view camera.
• Controlled by AV communication transmitted from AV control unit.
• AV control unit recognizes the presence of camera system with camera con-
nection recognition signal.
REAR VIEW CAMERA
The image of vehicle rear view is transmitted to camera control unit.
AV
MULTI AV SYSTEM
AV-375
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
STEERING SWITCH
• Operations for audio, hands-free phone, audio response and navigation, etc.
are possible.
• Steering switch signal (operation signal) is output to AV control unit.
STEERING ANGLE SENSOR
Sensor signal (steering angle) is transmitted to camera control unit.
MICROPHONE
• Used for hands-free phone operation and voice recognition.
• Mic signal is transmitted to AV control unit.
• Power (Mic VCC) is supplied from AV control unit.
AUXILIARY INPUT JACKS
Image signal of auxiliary input is transmitted to display, and sound signal is
transmitted to AV control unit.
GPS ANTENNA
GPS signal is received and transmitted to AV control unit.
ANTENNA AMP.
• Radio signal received by glass antenna is amplified and transmitted to AV
control unit.
• Power (antenna amp ON signal) is supplied from AV control unit.
SATELLITE RADIO ANTENNA
Satellite radio signal is received and transmitted to AV control unit.
iPod ADAPTER
• Inputs iPod sound signal from iPod
®
, and outputs iPod sound signal to AV
control unit.
• Receiving/transmitting of iPod
®
operation signals are performed as follows:
- between AV control unit and iPod adapter: AV communication.
- between iPod
®
and iPod adapter: serial communication.
Part name
Description
AV-376
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
NAVIGATION SYSTEM
NAVIGATION SYSTEM
System Diagram
INFOID:0000000001558774
System Description
INFOID:0000000001558775
DESCRIPTION
• The AV control unit controls navigation function while GPS tuner has built-in map data, GYRO (angle speed
sensor), on the HDD (Hard Disk Drive).
• The AV control unit inputs operation signal with communication signal, through display (touch panel) and
multifunction switch and steering switch.
• Guide sound is output to front speaker through BOSE amp. from AV control unit when operating navigation
system.
• A vehicle position is calculated with the GYRO (angle speed sensor), vehicle sensor, signal from GPS satel-
lite and map data stored on HDD (Hard Disk Drive), and transmits the map image signal (RGB image, RGB
area, RGB image synchronizing) to the display.
POSITION DETECTION PRINCIPLE
The navigation system periodically calculates the current vehicle
position according to the following three types of signals.
• Travel distance of the vehicle as determined by the vehicle speed
sensor
• Vehicle turning angle determined by the gyroscope (angular speed
sensor)
• The travel direction of the vehicle determined by the GPS antenna
(GPS information)
The current position of the vehicle is then identified by comparing the
calculated vehicle position with map data, which is stored in the HDD
(Hard Disk Drive) (map-matching), and indicated on the screen with
a current location mark. More accurate data is used by comparing
position detection results from GPS to the map-matching.
The current position is calculated by detecting the travel distance
from the previous calculation point, and its direction change.
• Travel distance
The travel distance is generated from the vehicle speed sensor
input signal. The automatic distance correction function is adopted
for preventing a miss-detection of the travel distance because of
tire wear etc.
• Travel direction
The gyroscope (angular velocity sensor) and GPS antenna (GPS
information) generate the change of the travel direction. Both have
advantages and disadvantages as per the following descriptions.
JSNIA0054GB
JSNIA0177GB
SEL684V
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст