Infiniti G37 Coupe. Manual — part 956
PARKING BRAKE SYSTEM
PB-5
< ON-VEHICLE MAINTENANCE >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
Never reuse the adjusting nut if the nut is removed.
c.
Operate the parking brake lever with a force of 196 N (20 kg, 44lb). Check that the lever stroke is within
the specified number of notches. (Check it by listening to the clicks of the ratchet.)
d.
Rotate the disc rotor with the parking brake lever released and check that there is no drag.
Standard
Number of notches
: Refer to
PB-6
< ON-VEHICLE MAINTENANCE >
PARKING BRAKE SHOE
PARKING BRAKE SHOE
Inspection
INFOID:0000000001647901
Rotate the disc rotor and check for any drag.
PARKING BRAKE CONTROL
PB-7
< ON-VEHICLE REPAIR >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
ON-VEHICLE REPAIR
PARKING BRAKE CONTROL
PEDAL TYPE
PEDAL TYPE : Exploded View
INFOID:0000000001647902
PEDAL TYPE : Removal and Installation
INFOID:0000000001647903
REMOVAL
1.
Remove rear tires with power tool.
2.
Remove instrument driver lower panel. Refer to
3.
Disconnect parking brake switch harness connector.
4.
Remove adjusting nut and loosen front cable.
5.
Remove device assembly.
6.
Remove center console. Refer to
7.
Remove the heat insulator and center muffler. Refer to
.
8.
Separate front cable from rear cable, and remove front cable.
9.
Remove parking brake shoe, and remove rear cable from toggle lever. Refer to
10. Remove rear cable mounting bolts and nuts, pull out rear cable from vehicle.
1.
Return spring
2.
Stopper rubber
3.
Device assembly
4.
Pedal pad
5.
Adjusting nut
6.
Parking brake switch
7.
Lock plate
8.
Front cable
9.
Equalizer
10. Spring
11. Pin
12. Rear cable (LH)
13. Rear cable (RH)
: Apply multi-purpose grease.
Refer to
for symbols not described on the above.
JPFIB0004GB
PB-8
< ON-VEHICLE REPAIR >
PARKING BRAKE CONTROL
INSTALLATION
Install in the reverse order of the removal.
PEDAL TYPE : Adjustment
INFOID:0000000001647904
ADJUSTMENT AFTER INSTALLATION
Adjust the parking brake pedal stroke. Refer to
PB-3, "PEDAL TYPE : Inspection and Adjustment"
LEVER TYPE
LEVER TYPE : Exploded View
INFOID:0000000001647905
LEVER TYPE : Removal and Installation
INFOID:0000000001647906
RMOVAL
1.
Remove rear tires with power tool.
2.
Remove center console. Refer to
3.
Disconnect parking brake switch harness connector.
4.
Remove adjusting nut and loosen front cable.
5.
Remove device assembly.
6.
Remove the heat insulator and center muffler. Refer to
.
7.
Separate front cable from rear cable, and remove front cable.
8.
Remove parking brake shoe, and remove rear cable from toggle lever. Refer to
9.
Remove rear cable mounting bolts and nuts, pull out rear cable from vehicle.
INSTALLATION
Install in the reverse order of the removal.
LEVER TYPE : Adjustment
INFOID:0000000001647907
ADJUSTMENT AFTER INSTALLATION
Adjust the parking brake lever stroke. Refer to
PB-4, "LEVER TYPE : Inspection and Adjustment"
1.
Adjusting nut
2.
Device assembly
3.
Front cable
4.
Rear cable (LH)
5.
Rear cable (RH)
6.
Pin
: Apply multi-purpose grease.
Refer to
for symbols not described on the above.
JPFIB0005GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст