Infiniti G37 Coupe. Manual — part 897
DIAGNOSIS SYSTEM (DRIVER SEAT C/U)
MIR-7
< FUNCTION DIAGNOSIS >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
DIAGNOSIS SYSTEM (DRIVER SEAT C/U)
Diagnosis Description
INFOID:0000000001840548
The automatic drive positioner system can be checked and diagnosed for component operation with CON-
SULT-III.
DIAGNOSTIC MODE
CONSULT-III Function
INFOID:0000000001840549
SELF DIAGNOSTIC RESULTS
.
DATA MONITOR
Diagnostic mode
Description
SELF-DIAG RESULTS
Performs self-diagnosis for the auto drive positioner system and displays the results.
DATA MONITOR
Displays input signals transmitted from various switches and sensors to driver seat con-
trol unit in real time.
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read.
ACTIVE TEST
Drive each output device.
ECU PART NUMBER
Displays part numbers of driver seat control unit parts.
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
SET SW
“ON/OFF”
×
×
ON/OFF status judged from the setting switch signal.
MEMORY SW 1
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 1 sig-
nal.
MEMORY SW 2
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 2 sig-
nal.
SLIDE SW–FR*
3
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (forward) sig-
nal.
SLIDE SW–RR*
3
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (backward)
signal.
RECLN SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (forward)
signal.
RECLN SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (backward)
signal.
LIFT FR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (upward)
signal.
LIFT FR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (down-
ward) signal.
LIFT RR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (upward)
signal.
LIFT RR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (down-
ward) signal.
MIR CON SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (upward) sig-
nal.
MIR CON SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (downward)
signal.
MIR CON SW–RH
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (passenger side) signal.
MIR-8
< FUNCTION DIAGNOSIS >
[WITH ADP]
DIAGNOSIS SYSTEM (DRIVER SEAT C/U)
*1
: M/T models display all item except this item.
*2
: A/T models display all item except this item.
MIR CON SW–LH
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (driver side) signal.
MIR CHNG SW–R
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (switching to right) signal.
MIR CHNG SW–L
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (switching to left) signal.
TILT SW-UP
“ON/OFF”
×
×
ON/OFF status judged from the tilt switch (upward) signal.
TILT SW-DOWN
“ON/OFF”
×
×
ON/OFF status judged from the tilt switch (downward) sig-
nal.
TELESCO SW-FR
“ON/OFF”
×
×
ON/OFF status judged from the telescoping switch (for-
ward) signal.
TELESCO SW-RR
“ON/OFF”
×
×
ON/OFF status judged from the telescoping switch (back-
ward) signal.
FORWARD SW*
3
“ON/OFF”
×
×
ON/OFF status judged from the forward switch signal.
WALK-IN SW*
3
“ON/OFF”
×
×
ON/OFF status judged from the power walk-in switch sig-
nal.
FWD LIMIT SW*
3
“ON/OFF”
×
×
ON/OFF status judged from the sliding limit switch signal.
SEAT BELT SW*
3
“ON/OFF”
×
×
ON/OFF status judged from the seat belt backle switch sig-
nal.
DETENT SW
*1
“ON/OFF”
×
×
The selector lever position “OFF (P position) / ON (other
than P position)” judged from the detention switch signal.
PARK BRAKE SW
*2
“ON/OFF”
×
×
The parking brake condition “ON (applied) / OFF (release)”
judged from the parking brake switch signal.
STARTER SW
“ON/OFF”
×
×
Ignition key switch ON (START, ON) /OFF (ACC, OFF) sta-
tus judged from the ignition switch signal.
SLIDE PULSE*
3
–
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases.
RECLN PULSE
–
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases.
LIFT FR PULSE
–
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases.
LIFT RR PULSE
–
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases.
MIR/SEN RH U–D
“V”
–
×
Voltage input from door mirror sensor (passenger side) up-
ward/downward is displayed.
MIR/SEN RH R–L
“V”
–
×
Voltage input from door mirror sensor (passenger side) left-
ward/rightward is displayed.
MIR/SEN LH U–D
“V”
–
×
Voltage input from door mirror sensor (driver side) upward/
downward is displayed.
MIR/SEN LH R–L
“V”
–
×
Voltage input from door mirror sensor (driver side) leftward/
rightward is displayed.
TILT SEN
“V”
–
×
Voltage input from tilt sensor upward/downward is dis-
played.
TELESCO SEN
“V”
–
×
Voltage input from telescopic sensor forward/backward is
displayed.
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
DIAGNOSIS SYSTEM (DRIVER SEAT C/U)
MIR-9
< FUNCTION DIAGNOSIS >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
*
3
: Only this item is displayed for driver seat without automatic drive positioner system.
ACTIVE TEST
CAUTION:
When driving vehicle, do not perform active test.
*: Driver seat without automatic driver position system display only “SEAT SLIDE”.
Test item
Description
SEAT SLIDE*
Activates/deactivates the sliding motor.
SEAT RECLINING
Activates/deactivates the reclining motor.
SEAT LIFTER FR
Activates/deactivates the lifting motor (front).
SEAT LIFTER RR
Activates/deactivates the lifting motor (rear).
TILT MOTOR
Activates/deactivates the tilt motor.
TELESCO MOTOR
Activates/deactivates the telescopic motor.
MIRROR MOTOR RH
Activates/deactivates the mirror motor (passenger side).
MIRROR MOTOR LH
Activates/deactivates the mirror motor (driver side).
MEMORY SW INDCTR
Turns ON/OFF the memory indicator.
MIR-10
< COMPONENT DIAGNOSIS >
[WITH ADP]
MIRROR SWITCH
COMPONENT DIAGNOSIS
MIRROR SWITCH
Description
INFOID:0000000001696811
It operates angle of the door mirror face.
It transmits mirror face adjust operation to AUTOMATIC DRIVE POSITIONER CONTROL UNIT.
Component Function Check
INFOID:0000000001696812
1.
CHECK MIRROR SWITCH FUNCTION
Check the operation on “MIR CON SW–UP/DN” and “MIR CON SW–RH/LH” in “DATA MONITOR” mode
with CONSULT-III.
Is the inspection result normal?
YES
>> Mirror switch function is OK.
NO
>> Refer to
Diagnosis Procedure
INFOID:0000000001696813
1.
CHECK MIRROR SWITCH SIGNAL
1.
Turn ignition switch ON.
2.
Check voltage between automatic drive positioner control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> GO TO 2.
2.
CHECK MIRROR SWITCH CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect automatic drive positioner control unit connector and door mirror remote control switch con-
nector.
3.
Check continuity between automatic drive positioner control unit harness connector and door mirror
remote control switch harness connector.
Monitor item
Condition
MIR CON SW-UP/DN
When operating the mirror switch toward the up or down side.
: ON
Other than above.
: OFF
MIR CON SW-RH/LH
When operating the mirror switch toward the right or left side.
: ON
Other than above.
: OFF
Automatic drive positioner control unit
Ground
Mirror switch
Condition
Voltage (V)
(Approx.)
Connector
Terminal
M51
3
Ground
UP
0
Other than above
5
4
LEFT
0
Other than above
5
19
DOWN
0
Other than above
5
20
RIGHT
0
Other than above
5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст