Infiniti G37 Coupe. Manual — part 3
ADP-6
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000001693605
OVERALL SEQUENCE
DETAILED FLOW
JMJIA1080GB
DIAGNOSIS AND REPAIR WORKFLOW
ADP-7
< BASIC INSPECTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
1.
GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the condition and the environment when
the incident/malfunction occurred).
>> GO TO 2.
2.
CHECK DTC WITH AUTOMATIC DRIVE POSITIONER SYSTEM
Check “Self Diagnostic Result” with CONSULT-III. Refer to
Is any symptom described and any DTC is displayed?
Symptom is described, DTC is displayed.>>GO TO 3.
Symptom is not described, DTC is displayed.>>GO TO 6.
Symptom is described, DTC is not displayed.>>GO TO 4.
3.
CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer.
>> GO TO 6.
4.
CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer.
>> GO TO 5.
5.
CHECK NORMAL OPERATING CONDITION
Check normal operating condition. Refer to
.
Is the incident normal operation?
YES
>> INSPECTION END
NO
>> GO TO 7.
6.
PERFORM DTC CONFIRMATION PROCEDURE
Perform the confirmation procedure for the detected DTC.
Is the DTC displayed?
YES
>> GO TO 8.
NO
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
7.
PERFORM COMPONENT FUNCTION CHECK
Perform the component function check for the isolated malfunctioning point.
>> GO TO 8.
8.
DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Isolate the malfunctioning point by performing the diagnosis procedure relevant to the symptom during the
component diagnosis.
>> GO TO 9.
9.
REPARE OR REPLACE
Repair or replace the malfunctioning part.
>> GO TO 10.
10.
FINAL CHECK
Perform the DTC confirmation procedure (if DTC is detected) or component function check (if no DTC is
detected) again, and then check that the malfunction can be repaired securely.
Are all malfunctions corrected?
ADP-8
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW
YES
>> INSPECTION END
Symptom is detected.>> GO TO 5.
DTC is detected.>> GO TO 6.
INSPECTION AND ADJUSTMENT
ADP-9
< BASIC INSPECTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
INSPECTION AND ADJUSTMENT
ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL
ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : De-
scription
INFOID:0000000001693606
Each function is reset to the following condition when the battery terminal is disconnected or driver seat con-
trol unit is replaced.
NOTE:
When disconnecting the battery terminal or replacing the driver seat control unit, DTC, registered items of
memory storing, and setting details of system setting detected in the past are erased. Perform operation after
checking the contents.
ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Spe-
cial Repair Requirement
INFOID:0000000001693607
1.
SYSTEM INITIALIZATION
Perform system initialization. Refer to
ADP-10, "SYSTEM INITIALIZATION : Description"
>> GO TO 2.
2.
SYSTEM SETTING
Perform system setting. Refer to
ADP-12, "SYSTEM SETTING : Description"
.
>> GO TO 3.
3.
MEMORY STORING
Perform memory storing. Refer to
ADP-11, "MEMORY STORING : Description"
>> END
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description
INFOID:0000000001699868
Each function is reset to the following condition when the battery terminal is disconnected or driver seat con-
trol unit is replaced.
NOTE:
When disconnecting the battery terminal or replacing the driver seat control unit, DTC, registered items of
memory storing, and setting details of system setting detected in the past are erased. Perform operation after
checking the contents.
Function
Condition
Procedure
Memory (Seat, steering, mirror)
Erased
Perform memory storing
Intelligent Key interlock
Erased
Perform system initialization
Perform memory storing
Seat synchronization
OFF
—
Function
Condition
Procedure
Memory (Seat, steering, mirror)
Erased
Perform memory storing
Intelligent Key interlock
Erased
Perform system initialization
Perform memory storing
Seat synchronization
OFF
—
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст