Infiniti G37 Coupe. Manual — part 10
ADP-34
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
INTELLIGENT KEY INTERLOCK FUNCTION
INTELLIGENT KEY INTERLOCK FUNCTION : System Diagram
INFOID:0000000001693640
INTELLIGENT KEY INTERLOCK FUNCTION : System Description
INFOID:0000000001693641
OUTLINE
When unlocking doors by using Intelligent Key or driver side door request switch, the system performs mem-
ory operation, exiting operation then entry operation.
OPERATION PROCEDURE
1.
Unlock doors by using Intelligent Key or driver side door request switch.
2.
The system performs memory operation, and then performs exit assist operation.
NOTE:
If the seat position is in memorized position before unlocking doors, memory operation does not perform.
NOTE:
Further information for Intelligent Key interlock function. Refer to
ADP-11, "MEMORY STORING : Description"
.
OPERATION CONDITION
Satisfy all of the following items. The Intelligent Key interlock function is not performed if these items are not
satisfied.
Item
Function
Door mirror motor
(driver side/passenger side)
Move the outside mirror face upward/downward and leftward/rightward.
Tilt & telescopic motor
Move the steering column upward/downward and forward/backward.
Lifting motor (front)
Move the seat lifter (front) upward/downward.
Lifting motor (rear)
Move the seat lifter (rear) upward/downward.
Reclining motor
Tilt and raise up the seatback.
Sliding motor
Slide the seat forward/backward.
Memory indicator
Illuminates or blinks according to the registration/operation status.
JMJIA0117GB
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-35
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
DETAIL FLOW
Item
Request status
System initialization
Done
Key switch
OFF (Key is removed.)
Ignition position
OFF
Seat back
Folded up
A/T selector lever (A/T models)
P position
Parking break (M/T models)
Applied
Switch inputs
• Power seat switch
• Tilt & telescopic switch
• Door mirror control switch
• Set switch
• Memory switch
OFF
(Not operated)
Order
Input
Output
Control unit condition
1
• Door unlock signal
(CAN)
• Key ID signal (CAN)
—
Driver seat control unit receives the door unlock signal and the key
ID signal from BCM when unlocking the door with Intelligent Key or
driver side door request switch.
2
—
—
Driver seat control unit performs the memory function.
ADP-36
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
INTELLIGENT KEY INTERLOCK FUNCTION : Component Parts Location
INFOID:0000000001699877
JMJIA0843ZZ
1.
BCM M118, M119, M122, M123
2.
Automatic drive positioner control unit
M51, M52
3.
Driver seat control unit B503, B504
4.
Unified meter and A/C amp. M67
5.
AV control unit
With NAVI M87, M88
Without NAVI M83, M85
6.
A/T assembly connector F51
7.
Tilt & telescopic switch M31
8.
Key slot M22
9.
Tilt sensor M48
10. Telescopic sensor M48
11.
Seat memory switch D5
12. Door mirror remote control switch
D17
A.
Dash side lower (passenger side)
B.
View with instrument driver lower
panel removed
C.
Backside of seat cushion (driver side)
D.
Behind cluster lid C
E.
A/T assembly
(TCM is built in A/T assembly)
F.
View with instrument driver lower
panel removed
G
View with steering column cover low-
er and upper removed
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-37
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
JMJIA0844ZZ
13. Driver side door switch B16
14. A/T device (detention switch) M137
15. Parking brake switch B14
16. Door mirror (driver side) D3
17. Telescopic motor M49
18. Tilt motor M49
19. Forward switch B512
20. Sliding limit switch B514
21. Power walk-in switch B513
22.
Seat belt buckle switch (driver side)
B13
H.
View with center console assembly
is removed.
I.
View with center console assembly
is removed.
J.
View with instrument driver lower
panel is removed.
K.
View with seat back pad is removed. L.
View with seat cushion pad is re-
moved.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст