Infiniti G37 Coupe. Manual — part 1195
SRC-30
< COMPONENT DIAGNOSIS >
B1022 OCCUPANT SENS C/U
>> GO TO 2.
2.
CHECK AIR BAG WARNING LAMP
Check the warning lamp status.
Is malfunctioning part detected?
YES
>> Refer to
.
NO
>> INSPECTION END.
Diagnosis Procedure (Component diagnosis)
INFOID:0000000001694502
With CONSULT-lll
WARNING:
• Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least 3 min-
utes. (To discharge backup capacitor.)
• Do not use unspecified tester or other measuring device.
DIAGNOSTIC PROCEDURE
1.
CHECK HARNESS CONNECTOR
Check the connection of harness connector.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness connectors.
2.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace wiring harness.
3.
CHECK OCCUPANT CLASSIFICATION SYSTEM CONTROL UNIT
1.
Replace OCS CONTROL UNIT. (passenger side seat cushion assembly.)
2.
Check the screen of CONSULT-lll.
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> Check the intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
B1023 PASS A/B INDCTR CKT
SRC-31
< COMPONENT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
B1023 PASS A/B INDCTR CKT
Description
INFOID:0000000001694503
DTC B1023 PASS A/B INDCTR CKT
Suppresses the deployment of passenger air bag when the condition of passenger seat is empty or child and
child-seat. And turns on passenger air bag indicator (cut-off telltale) lamp when the condition of passenger
seat is child-seat and child. In case of malfunction the blinking of the SRS air bag warning lamp reports the
malfunction to driver and by the on board self-diagnosis system or electro-diagnosis tester CONSULT-lll can
detect the cause.
OPERATION
Turns on passenger air bag indicator (cut-off telltale) when the passenger seat is empty or occupied by child-
seat and child.
STRUCTURE
Passenger air bag indicator (cut-off telltale) with LED illumination.
INSTALLATION
Passenger air bag indicator (cut-off telltale) is installed at the instrument panel center.
DTC Logic
INFOID:0000000001694504
DTC DETECTION LOGIC
With CONSULT-lll
DTC No. Index (“SELF-DIAG [CURRENT]”), (“SELF-DIAG [PAST]” or “TROUBLE DIAG RECORD”)
DTC CONFIRMATION PROCEDURE (With CONSULT-lll)
1.
INSPECTION START
Turn ignition switch ON.
>> GO TO 2.
2.
CHECK SELF-DIAG RESULT
Check the screen of CONSULT-lll.
Is malfunctioning part detected?
YES
>> Refer to
SRC-32, "Diagnosis Procedure (Component diagnosis)"
NO
>> INSPECTION END.
DTC CONFIRMATION PROCEDURE (Without CONSULT-lll)
NOTE:
• SRS will not enter diagnosis mode if no malfunction is detected in user mode.
1.
INSPECTION START
Turn ignition switch ON.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B1023
PASS A/B INDCTR CKT
[UNIT FAIL]
Cut-off telltale circuit is open or shorted
to ground or the circuits are shorted
each other.
• Disconnection of wiring harness.
• Internal breakdown in passenger air
bag cut-off indicator unit.
• Internal breakdown in diagnosis sen-
sor unit (ACU).
SRC-32
< COMPONENT DIAGNOSIS >
B1023 PASS A/B INDCTR CKT
>> GO TO 2.
2.
CHECK AIR BAG WARNING LAMP
Check the warning lamp status.
Is malfunctioning part detected?
YES
>> Refer to
.
NO
>> INSPECTION END.
Diagnosis Procedure (Component diagnosis)
INFOID:0000000001694505
With CONSULT-lll
WARNING:
• Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least 3 min-
utes. (To discharge backup capacitor.)
• Do not use unspecified tester or other measuring device.
DIAGNOSTIC PROCEDURE
1.
CHECK HARNESS CONNECTOR
Check the connection of harness connector.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness connectors.
2.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace wiring harness.
3.
CHECK PASSENGER AIR BAG OFF INDICATOR
1.
Replace passenger air bag off indicator.
2.
Check the screen of CONSULT-lll.
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> Check the intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
B1026, B1027, B1028, B1029, B1030, B1031 DIAGNOSIS SENSOR UNIT
SRC-33
< COMPONENT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
B1026, B1027, B1028, B1029, B1030, B1031 DIAGNOSIS SENSOR UNIT
Description
INFOID:0000000001694506
DTC B1026, B1027, B1028, B1029, B1030, B1031 DIAGNOSIS SENSOR UNIT
Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the air
bag warning lamp in the combination meter. Malfunctioning part can be detected by on board self-diagnosis
system and electro-diagnosis tester CONSULT-lll.
OPERATION
It detects a shock that exceeds specified level and monitors such systems as the driver and passenger air
bag, side air bag, curtain air bag, pre-tensioner seat belts and Occupant Classification System (OCS) to
ensure proper operation.
STRUCTURE
It contains the “G” sensors for both frontal and side collisions and spare battery function in case of main bat-
tery damage in collision.
INSTALLATION
SRS diagnosis sensor unit is installed under the center console with fixed bolts.
DTC Logic
INFOID:0000000001694507
DTC DETECTION LOGIC
With CONSULT-lll
DTC No. Index (“SELF-DIAG [CURRENT]”), (“SELF-DIAG [PAST]” or “TROUBLE DIAG RECORD”)
DTC CONFIRMATION PROCEDURE (With CONSULT-lll)
1.
INSPECTION START
Turn ignition switch ON.
>> GO TO 2.
2.
CHECK SELF-DIAG RESULT
Check the screen of CONSULT-lll.
Is malfunctioning part detected?
YES
>> Refer to
SRC-34, "Diagnosis Procedure (Component diagnosis)"
NO
>> INSPECTION END.
DTC CONFIRMATION PROCEDURE (Without CONSULT-lll)
NOTE:
• SRS will not enter diagnosis mode if no malfunction is detected in user mode.
1.
INSPECTION START
Turn ignition switch ON.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B1026
B1027
B1028
B1029
B1030
B1031
CONTROL UNIT
Diagnosis sensor unit is out of order.
Internal breakdown in diagnosis sensor
unit (ACU).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст