Infiniti G37 Coupe. Manual — part 1180
ENGINE DOES NOT START WITH INTELLIGENT KEY
SEC-217
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
ENGINE DOES NOT START WITH INTELLIGENT KEY
Description
INFOID:0000000001715887
• Before performing the diagnosis in the following table, check “Work Flow”. Refer to
.
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
Conditions of Vehicle (Operating Conditions)
• “ENGINE START BY I-KEY” in “WORK SUPPORT” is ON when setting on CONSULT-III.
• Intelligent Key is not inserted in key slot.
• One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.
Diagnosis Procedure
INFOID:0000000001715888
1.
CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit.
Refer to
SEC-119, "BCM : Diagnosis Procedure"
Is the inspection normal?
YES
>> GO TO 2.
NO
>> Repair or replace malfunctioning parts.
2.
CHECK IPDM E/R POWER SUPPLY AND GROUND CIRCUIT
Check IPDM E/R power supply and ground circuit.
Refer to
SEC-119, "IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM) : Diagno-
Is the inspection normal?
YES
>> GO TO 3.
NO
>> Repair or replace malfunctioning parts.
3.
CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.
Refer to
PCS-71, "Component Function Check"
Is the inspection normal?
YES
>> GO TO 4 (M/T models).
>> GO TO 5 (A/T models).
NO
>> Repair or replace malfunctioning parts.
4.
CHECK ASCD OR ICC CLUTCH SWITCH FOR M/T MODELS
Check ASCD or ICC clutch switch.
Refer to
SEC-124, "Component Function Check"
Is the inspection normal?
YES
>> GO TO 5.
NO
>> Repair or replace malfunctioning parts.
5.
CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
SEC-218
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
STEERING DOES NOT LOCK
STEERING DOES NOT LOCK
Description
INFOID:0000000001726094
If door switch is malfunctioning, BCM cannot lock the steering. If BCM does not detect DTC, steering lock unit
is normal.
Diagnosis Procedure
INFOID:0000000001726120
1.
CHECK DOOR SWITCH
Check door switch.
Refer to
DLK-66, "Component Function Check"
.
Is the inspection normal?
YES
>> GO TO 2.
NO
>> Repair or replace malfunctioning parts.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection normal?
YES
>> Check intermittent incident. Refer to .
NO
>> GO TO 1.
ENGINE DOES NOT START WHEN INTELLIGENT KEY IS INSERTED INTO KEY
SLOT
SEC-219
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
ENGINE DOES NOT START WHEN INTELLIGENT KEY IS INSERTED INTO
KEY SLOT
Description
INFOID:0000000001715899
• Before performing the diagnosis in the following table, check “Work Flow”. Refer to
.
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
Conditions of Vehicle (Operating Conditions)
• Intelligent Key is inserted in key slot.
• One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.
Diagnosis Procedure
INFOID:0000000001715900
1.
CHECK KEY SLOT
Check key slot.
Refer to
SEC-121, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
SEC-220
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
SECURITY INDICATOR DOES NOT TURN ON
SECURITY INDICATOR DOES NOT TURN ON
Description
INFOID:0000000001715891
• Before performing the diagnosis in the following table, check “Work Flow”. Refer to
.
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
Conditions of Vehicle (Operating Conditions)
• Intelligent Key is not inserted in key slot.
• Ignition switch position is not in the ON position.
Diagnosis Procedure
INFOID:0000000001715892
1.
CHECK VEHICLE SECURITY INDICATOR
Check vehicle security indicator.
Refer to
SEC-135, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст