Infiniti G37 Coupe. Manual — part 692
EXL-188
< ON-VEHICLE REPAIR >
[XENON TYPE]
FRONT COMBINATION LAMP
ON-VEHICLE REPAIR
FRONT COMBINATION LAMP
Exploded View
INFOID:0000000001604721
REMOVAL
DISASSEMBLY
Without AFS
1.
Front combination lamp
JPLIA0546ZZ
1.
Front turn signal lamp bulb
2.
Front turn signal lamp bulb socket
3.
Side marker lamp bulb
4.
Side marker lamp bulb socket
5.
Xenon bulb
6.
Resin cap
7.
Seal packing
8.
Xenon bulb socket
9.
Resin cap
10.
Seal packing
11. Front fog lamp bulb
12. Parking lamp bulb socket
13.
Parking lamp bulb
14. Seal packing
15. Bump bracket
16.
HID control unit
17. Headlamp housing assembly
18. Retaining spring
Refer to
for symbols not described above.
JPLIA0547ZZ
FRONT COMBINATION LAMP
EXL-189
< ON-VEHICLE REPAIR >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
With AFS
Removal and Installation
INFOID:0000000001604722
REMOVAL
CAUTION:
Disconnect the battery negative terminal or the fuse.
1.
Remove front bumper fascia. Refer to
2.
Remove the mounting bolts.
3.
Remove the holding clip (A)* and the harness clip (B).
*: Right side only
4.
Pull out the headlamp assembly forward the vehicle.
5.
Disconnect the connector before removing the headlamp hous-
ing assembly.
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to
.
Replacement
INFOID:0000000001604723
CAUTION:
• Disconnect the battery negative terminal or the fuse.
• After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
1.
Front turn signal lamp bulb
2.
Front turn signal lamp bulb socket
3.
Side marker lamp bulb
4.
Side marker lamp bulb socket
5.
Xenon bulb
6.
Resin cap
7.
Seal packing
8.
Xenon bulb socket
9.
Resin cap
10.
Seal packing
11. Front fog lamp bulb
12. Parking lamp bulb socket
13.
Parking lamp bulb
14. Seal packing
15. Bump bracket
16.
HID control unit
17. Headlamp housing assembly
18. Retaining spring
Refer to
for symbols not described above.
JPLIA0548ZZ
JPLIA0549ZZ
EXL-190
< ON-VEHICLE REPAIR >
[XENON TYPE]
FRONT COMBINATION LAMP
HEADLAMP BULB
1.
Remove the fender protector. Keep a service area.
2.
Rotate the resin cap counterclockwise and unlock it.
3.
Rotate the bulb socket counterclockwise and unlock it.
4.
Remove the retaining spring lock. Remove the bulb from the
headlamp housing assembly.
CAUTION:
Never break the xenon bulb ceramic tube when replacing
the bulb.
PARKING LAMP BULB
1.
Remove the air cleaner case.
2.
Rotate the bulb socket counterclockwise and unlock it.
3.
Remove the bulb from the bulb socket.
FRONT TURN SIGNAL LAMP BULB
1.
Remove the fender protector. Keep a service area.
2.
Rotate the bulb socket counterclockwise and unlock it.
3.
Remove the bulb from the bulb socket.
FRONT FOG LAMP BULB
1.
Remove the air cleaner case.
2.
Rotate the resin cap counterclockwise and unlock it.
3.
Disconnect front fog lamp bulb terminals.
4.
Remove the retaining spring lock. Remove the bulb.
SIDE MARKER LAMP BULB
1.
Remove the fender protector. Keep a service area.
2.
Rotate the bulb socket counterclockwise and unlock it.
3.
Remove the bulb from the bulb socket.
Disassembly and Assembly
INFOID:0000000001604724
DISASSEMBLY
1.
Rotate the resin cap counterclockwise and unlock it.
2.
Rotate the xenon bulb socket counterclockwise and unlock it.
3.
Remove the retaining spring lock. Remove the xenon bulb.
4.
Remove the bump bracket.
5.
Remove the HID control unit installation screw.
6.
Remove the screw. Disconnect the connector from HID control unit.
7.
Pull out the xenon bulb socket from the headlamp housing assembly.
8.
Rotate the parking lamp bulb socket counterclockwise and unlock it.
9.
Remove the bulb from the parking lamp bulb socket.
10. Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.
11. Remove the bulb from the front turn signal lamp bulb socket.
12. Rotate the side marker lamp bulb socket counterclockwise and unlock it.
13. Remove the bulb from the side marker lamp bulb socket.
14. Rotate the resin cap counterclockwise and unlock it.
15. Disconnect front fog lamp bulb terminals.
JPLIA0550ZZ
FRONT COMBINATION LAMP
EXL-191
< ON-VEHICLE REPAIR >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
16. Remove the retaining spring lock. Remove the bulb.
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION:
• Install HID control unit securely.
• After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст