Infiniti G37 Coupe. Manual — part 908
DOOR MIRROR
MIR-51
< ON-VEHICLE REPAIR >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
GLASS MIRROR : Disassembly and Assembly
INFOID:0000000001831181
DISASSEMBLY
1.
Remove the pawls and disassemble the base cover.
2.
Place the glass mirror upward.
3.
Put a strip of protective tape (B) on housing assembly.
4.
As shown in the figure, insert a small slotted screwdriver (A) into the recess between glass mirror (1) and
actuator (2). Push up two pawls (3) to remove glass mirror lower half side.
NOTE:
• When pushing up pawls do not attempt to use one recess only. Be sure to push up with both recesses.
• Insert screwdriver into recesses, and push up while rotating (twisting) to make work easier.
5.
Remove two terminals of mirror heater attachment.
6.
Lightly lift up lower side of glass mirror, and detach two pawls of upper side as if pulling it out. Disassem-
ble glass mirror from actuator.
NOTE:
Be certain not to allow grease on sealing agent in center of mirror or back side of glass mirror.
ASSEMBLY
Assemble in the reverse order of disassemble.
CAUTION:
After installation, visually check that pawls are securely engaged.
DOOR MIRROR COVER
DOOR MIRROR COVER : Exploded View
INFOID:0000000001831192
DISASSEMBLY
1.
Mirror assembly
2.
Door mirror actuator
3.
Glass mirror
4.
Base cover
5.
Door mirror cover
: Pawl
JMLIA0056ZZ
MIR-52
< ON-VEHICLE REPAIR >
[WITH ADP]
DOOR MIRROR
DOOR MIRROR COVER : Disassembly and Assembly
INFOID:0000000001831183
CAUTION:
Do not damage the mirror bodies.
DISASSEMBLY
1.
Remove the glass mirror. Refer to
MIR-51, "GLASS MIRROR : Disassembly and Assembly"
2.
Remove the pawls, and disassemble the door mirror cover from the mirror assembly.
ASSEMBLY
Install in the reverse order of removal.
CAUTION:
After installation, visually check that pawls are securely engaged.
1.
Mirror assembly
2.
Door mirror actuator
3.
Glass mirror
4.
Base cover
5.
Door mirror cover
: Pawl
JMLIA0081ZZ
DOOR MIRROR REMOTE CONTROL SWITCH
MIR-53
< ON-VEHICLE REPAIR >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
DOOR MIRROR REMOTE CONTROL SWITCH
Exploded View
INFOID:0000000001696846
Removal and Installation
INFOID:0000000001696847
REMOVAL
1.
Remove the power window main switch finisher (2).
Refer to
PWC-92, "Removal and Installation"
2.
Remove door mirror remote control switch (1) from power win-
dow main switch finisher (2) using screwdriver (A).
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMLIA0071ZZ
MIR-54
< FUNCTION DIAGNOSIS >
[WITHOUT ADP]
DOOR MIRROR SYSTEM
FUNCTION DIAGNOSIS
DOOR MIRROR SYSTEM
Component Description
INFOID:0000000001696852
Component
Function
Door mirror remote control switch
It supplies power to mirror motor through mirror switch and changeover
switch.
Door mirror
It makes mirror face operate from side to side and up and down with the
mirror control switch operation.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст