Infiniti G37 Coupe. Manual — part 58
ADP-226
< SYMPTOM DIAGNOSIS >
MANUAL FUNCTION OR MEMORY FUNCTION DOES NOT OPERATE
ADP-19, "MANUAL FUNCTION : System Description"
. (Manual operation)
ADP-29, "MEMORY FUNCTION : System Description"
. (Memory function)
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> Replace driver seat control unit.
STEERING TILT
STEERING TILT : Diagnosis Procedure
INFOID:0000000001728278
1.
CHECK STEERING TILT MECHANISM
Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repaire or replace the malfunction parts.
2.
CHECK STEERING TILT OPERATION IN MANUAL FUNCTION
Check steering tilt operation in manual function.
Refer to
ADP-19, "MANUAL FUNCTION : System Description"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 5.
3.
CHECK STEERING TILT OPERATION IN MEMORY FUNCTION
Check steering tilt operation in memory function.
Refer to
ADP-29, "MEMORY FUNCTION : System Description"
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> GO TO 4.
4.
CHECK TILT SENSOR
Check steering tilt sensor.
Refer to
ADP-107, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repaire or replace the malfunction parts.
5.
CHECK TILT SWITCH
Check tilt switch.
Refer to
ADP-81, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repaire or replace the malfunction parts.
6.
CHECK TILT MOTOR
Check tilt motor.
Refer to
ADP-126, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repaire or replace the malfunction parts.
7.
CONFIRM THE OPERATION
Check the operation again.
Refer to
ADP-19, "MANUAL FUNCTION : System Description"
. (Manual function)
ADP-29, "MEMORY FUNCTION : System Description"
. (Memory function)
Is the result normal?
MANUAL FUNCTION OR MEMORY FUNCTION DOES NOT OPERATE
ADP-227
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> Replace automatic drive positioner control unit. Refer to
ADP-237, "Removal and Installation"
.
STEERING TELESCOPIC
STEERING TELESCOPIC : Diagnosis Procedure
INFOID:0000000001728279
1.
CHECK STEERING TELESCOPIC MECHANISM
Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
CHECK STEERING TELESCOPIC OPERATION IN MANUAL FUNCTION
Check steering telescopic operation in manual function.
Refer to
ADP-19, "MANUAL FUNCTION : System Description"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 5.
3.
CHECK STEERING TELESCOPIC OPERATION IN MEMORY FUNCTION
Check steering telescopic operation in memory function.
Refer to
ADP-29, "MEMORY FUNCTION : System Description"
.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> GO TO 4.
4.
CHECK TELESCOPIC SENSOR
Check steering telescopic sensor.
Refer to
ADP-110, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace the malfunction parts.
5.
CHECK TELESCOPIC SWITCH
Check telescopic switch.
Refer to
ADP-83, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunction parts.
6.
CHECK TELESCOPIC MOTOR
Check telescopic motor.
Refer to
ADP-128, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace the malfunction parts.
7.
CONFIRM THE OPERATION
Check the operation again.
Refer to
ADP-19, "MANUAL FUNCTION : System Description"
. (Manual function)
ADP-29, "MEMORY FUNCTION : System Description"
. (Memory function)
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> Replace automatic drive positioner control unit. Refer to
ADP-237, "Removal and Installation"
.
ADP-228
< SYMPTOM DIAGNOSIS >
MANUAL FUNCTION OR MEMORY FUNCTION DOES NOT OPERATE
DOOR MIRROR
DOOR MIRROR : Diagnosis Procedure
INFOID:0000000001728280
1.
CHECK DOOR MIRROR MECHANISM
Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
CHECK DOOR MIRROR OPERATION IN MANUAL FUNCTION
Check door mirror operation in manual function.
Refer to
ADP-19, "MANUAL FUNCTION : System Description"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 5.
3.
CHECK DOOR MIRROR OPERATION IN MEMORY FUNCTION
Check door mirror operation in memory function.
Refer to
ADP-29, "MEMORY FUNCTION : System Description"
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> GO TO 4.
4.
CHECK MIRROR SENSOR
Check mirror sensor.
Refer to
ADP-113, "DRIVER SIDE : Component Function Check"
. (Driver side)
ADP-115, "PASSENGER SIDE : Component Function Check"
. (Passenger side)
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace the malfunction parts.
5.
CHECK MIRROR SWITCH
Check mirror switch.
Refer to
MIR-10, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunction parts.
6.
CHECK MIRROR MOTOR
Check mirror motor.
Refer to
ADP-130, "DRIVER SIDE : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace the malfunction parts.
7.
CONFIRM THE OPERATION
Check the operation again.
Refer to
ADP-19, "MANUAL FUNCTION : System Description"
. (Manual function)
ADP-29, "MEMORY FUNCTION : System Description"
. (Memory function)
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> Replace automatic drive positioner control unit. Refer to
POWER WALK-IN FUNCTION DOES NOT OPERATE
ADP-229
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
POWER WALK-IN FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000001728283
1.
CHECK POWER WALK-IN FUNCTION
Check power walk-in function.
Refer to
ADP-39, "POWER WALK-IN FUNCTION : System Description"
Is the inspection result normal?
YES
>> Power walk-in function is OK.
NO
>> GO TO 2.
2.
PERFORM INITIALIZATION PROCEDURE
1.
Perform initialization procedure.
Refer to
ADP-10, "SYSTEM INITIALIZATION : Special Repair Requirement"
.
2.
Check power walk-in function.
Refer to
ADP-39, "POWER WALK-IN FUNCTION : System Description"
.
Is the inspection result normal?
YES
>> Power walk-in function is normal.
NO
>> GO TO 3.
3.
CHECK POWER WALK-IN SWITCH
Check power walk-in switch.
Refer to
ADP-79, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CHECK SEAT BELT BUCKLE SWITCH
Check seat belt buckle switch.
Refer to
ADP-75, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunction parts.
5.
CHECK FORWARD SWITCH
Check forward switch.
Refer to
ADP-73, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunction parts.
6.
CHECK SLIDING LIMIT SWITCH
Check sliding limit switch.
Refer to
ADP-77, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace the malfunction parts.
7.
CHECK DRIVER SIDE DOOR SWITCH
Check driver side door switch.
Refer to
ADP-89, "DRIVER SIDE : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 8.
NO
>> Repair or replace the malfunction parts.
8.
CONFIRM THE OPERATION
Check the operation again.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст