Infiniti G37 Coupe. Manual — part 1138
B2191 DIFFERENCE OF KEY
SEC-49
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
B2191 DIFFERENCE OF KEY
Description
INFOID:0000000001700106
Performs ID verification through BCM and Intelligent Key when push-button ignition switch is pressed.
Prohibits the release of steering lock or start of engine when an unregistered ID of Intelligent Key is used.
DTC Logic
INFOID:0000000001700107
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Press the push-button ignition switch
2.
Check “Self diagnostic result” with CONSULT-III.
Is DTC detected?
YES
>> Go to
NO
>> INSPECTION END.
Diagnosis Procedure
INFOID:0000000001908457
1.
PERFORM INITIALIZATION
Perform initialization with CONSULT-III. Re-register all Intelligent Keys.
For initialization and registration of Intelligent Key. Refer to “CONSULT-III Operation Manual NATS-IVIS/
NVIS”.
Can the system be initialized and can the engine be started with re-registered Intelligent Key?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
REPLACE INTELLIGENT KEY
1.
Replace Intelligent Key.
2.
Perform initialization with CONSULT-III.
For initialization and registration of Intelligent Key. Refer to “CONSULT-III Operation Manual NATS-IVIS/
NVIS”.
Can the system be initialized and can the engine be started with re-registered Intelligent Key?
YES
>> INSPECTION END
NO
>> GO TO 3.
3.
CHECK INTERMITTENT INCIDENT
GI-38, "Intermittent Incident"
.
>> INSPECTION END
DTC No.
Trouble diagnosis
name
DTC detecting condition
Possible cause
B2191
DIFFERENCE OF
KEY
The ID verification results between BCM and Intel-
ligent Key are NG. The registration is necessary.
• Intelligent Key
SEC-50
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
B2192 ID DISCORD, IMMU-ECM
B2192 ID DISCORD, IMMU-ECM
Description
INFOID:0000000001700109
BCM performs the ID verification with ECM that allows the engine to start. Start the engine if the ID is OK.
ECM prevents the engine from starting if the ID is not registered. BCM starts the communication with ECM if
ignition switch is turned ON.
DTC Logic
INFOID:0000000001700110
DTC DETECTION LOGIC
NOTE:
• If DTC B2192 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
.
• If DTC B2192 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Turn ignition switch ON under the following conditions.
A/T models
-
A/T selector lever is in the P or N position
-
Do not depress brake pedal
M/T models
-
Do not depress clutch pedal
2.
Check “Self diagnostic result” with CONSULT-III.
Is DTC detected?
YES
>> Go to
NO
>> INSPECTION END.
Diagnosis Procedure
INFOID:0000000001726272
1.
PERFORM INITIALIZATION
Perform initialization with CONSULT-III. Re-register all Intelligent Keys.
For initialization and registration of Intelligent Key. Refer to “CONSULT-III Operation Manual NATS-IVIS/
NVIS”.
Can the system be initialized and can the engine be started with re-registered Intelligent Key?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-79, "Removal and Installation"
2.
Perform initialization with CONSULT-III.
For initialization, refer to “CONSULT-III Operation Manual NATS-IVIS/NVIS”.
Can the system be initialized and can the engine be started with re-registered Intelligent Key?
YES
>> INSPECTION END
NO
>> GO TO 3.
3.
CHECK INTERMITTENT INCIDENT
GI-38, "Intermittent Incident"
DTC No.
Trouble diagnosis
name
DTC detecting condition
Possible cause
B2192
ID DISCORD, IMMU-
ECM
The ID verification results between BCM and ECM
are NG. The registration is necessary.
• BCM
• ECM
B2192 ID DISCORD, IMMU-ECM
SEC-51
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
>> INSPECTION END
SEC-52
< COMPONENT DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
B2193 CHAIN OF ECM-IMMU
B2193 CHAIN OF ECM-IMMU
Description
INFOID:0000000001700112
BCM performs the ID verification with ECM that allows the engine to start. Start the engine if the ID is OK.
ECM prevents the engine from starting if the ID is not registered. BCM starts the communication with ECM if
ignition switch is turned ON.
DTC Logic
INFOID:0000000001700113
DTC DETECTION LOGIC
NOTE:
• If DTC B2193 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
.
• If DTC B2193 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Turn ignition switch ON under the following conditions.
A/T models
-
A/T selector lever is in the P or N position
-
Do not depress brake pedal
M/T models
-
Do not depress clutch pedal
2.
Check “Self diagnostic result” with CONSULT-III.
Is DTC detected?
YES
>> Go to
NO
>> INSPECTION END.
Diagnosis Procedure
INFOID:0000000001700114
1.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-79, "Removal and Installation"
.
2.
Perform initialization with CONSULT-III.
For initialization, refer to “CONSULT-III Operation Manual NATS-IVIS/NVIS”.
Does the engine start?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
REPLACE ECM
1.
Replace ECM.
2.
EC-16, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (ECM) : Description"
>> INSPECTION END
DTC No.
Trouble diagnosis
name
DTC detecting condition
Possible cause
B2193
CHAIN OF ECM-
IMMU
Inactive communication between ECM and BCM
• Harness or connectors
(The CAN communication line is
open or shorted)
• BCM
• ECM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст