Infiniti G37 Coupe. Manual — part 1381
DUCT AND GRILLE
VTL-47
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
2.
Remove mounting screw (A).
3.
Remove clips (B), and then remove defroster nozzle (1), side defroster nozzle (2) and ventilator duct (3).
INSTALLATION
Installation is basically the reverse order of removal.
SIDE DEFROSTER DUCT
SIDE DEFROSTER DUCT : Exploded View
INFOID:0000000001713731
JSIIA0043ZZ
JSIIA0018ZZ
VTL-48
< ON-VEHICLE REPAIR >
DUCT AND GRILLE
SIDE DEFROSTER DUCT : Removal and Installation
INFOID:0000000001665958
REMOVAL
Remove front pillar garnishes Refer to
INSTALLATION
Installation is basically the reverse order of removal.
FOOT GRILLE
FOOT GRILLE : Exploded View
INFOID:0000000001665963
FOOT GRILLE : Removal and Installation
INFOID:0000000001665964
REMOVAL
1.
Remove mounting clips (A), and then remove foot grille (left) (1).
2.
Remove mounting clips (A), and then remove foot grille (right)
(1).
1.
Side defroster duct (front pillar gar-
nish) (right)
2.
Side defroster nozzle (right)
3.
Defroster nozzle
4.
Side defroster duct (front pillar gar-
nish) (left)
5.
Side defroster nozzle (left)
6.
Ventilator duct
7.
Front defroster grille (left)
8.
Instrument panel & pad
9.
Side ventilator grille (left)
10. Center ventilator grille (cluster lid D)
11. Side ventilator grille (right)
12. Front defroster grille (right)
1.
Foot grille (left)
2.
Foot grille (right)
JSIIA0217ZZ
JSIIA0040ZZ
JSIIA0041ZZ
DUCT AND GRILLE
VTL-49
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
INSTALLATION
Installation is basically the reverse order of removal.
FOOT DUCT
FOOT DUCT : Exploded View
INFOID:0000000001713732
1.
Aspirator
2.
Aspirator hose
3.
Front heater duct
4.
Foot duct (left)
5.
Defroster seal
6.
Packing
7.
Ventilator seal
8.
Ventilator door
9.
Foot duct (right)
10.
Defroster door lever
11.
Foot door lever
12. Ventilator door lever
13.
Ventilator door link
14.
Main link
15. Mode door motor bracket
16.
Mode door motor
17.
Air mix door motor (passenger side)
18. Intake sensor
19.
Intake sensor bracket
20.
O-ring
21. Low-pressure pipe 1
22.
High-pressure pipe 2
23.
Expansion valve
24. Cooler pipe grommet
25.
Insulator
26.
Evaporator cover adapter
27. Heater pipe bracket
28.
Case rubber
29.
Case packing
30. Heater & cooling unit case (left)
JSIIA0863GB
VTL-50
< ON-VEHICLE REPAIR >
DUCT AND GRILLE
FOOT DUCT : Removal and Installation
INFOID:0000000001665966
REMOVAL
1.
Remove heater & cooling unit assembly. Refer to
VTL-35, "Removal and Installation"
.
2.
Remove mounting screws (A), and then remove heater pipe
cover (1).
3.
Remove mounting screws (B), and then remove foot duct (left)
(2).
4.
Remove air mix door motor (passenger side). Refer to
VTL-41, "Removal and Installation"
.
5.
Remove mode door motor. Refer to
VTL-39, "Removal and Installation"
.
6.
Remove mounting screws (A), and then remove evaporator
cover (1).
7.
Remove mounting screws (B), and then remove foot duct (right)
(2).
INSTALLATION
Installation is basically the reverse order of removal.
REAR FLOOR DUCT 1
31. Heater pipe grommet
32.
Heater core
33.
Air mix door motor (driver side)
*
34. Foot door (left)
35.
Rear ventilator door
36.
Foot door (right)
37. Max. cool door lever
38.
Foot door link
39.
Defroster door link
40. Max. cool door link
41.
Main link sub
42.
Evaporator cover
43. Heater & cooling unit case (right)
44.
Evaporator
45.
Drain hose
46. Clamp
47.
Air mix door (Slide door)
48.
Air mix door adapter
49. Heater pipe cover
50.
Max. cool door (left)
51.
Defroster door (left)
52. Center case
53.
Defroster door (right)
54.
Max. cool door (right)
*
With left and right ventilation temperature separately system.
for symbols in the figure.
JSIIA0106ZZ
JSIIA0107ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст