Infiniti Qx (2009 year). Manual — part 9
NOTE:
The footwell and door step lights illuminate
when the driver and passenger doors are
open regardless of the interior light switch
position. These lights will turn off auto-
matically after about 30 minutes while
doors are open to prevent the battery from
becoming discharged.
CAUTION
Do not use for extended periods of time
with the engine stopped. This could result
in a discharged battery.
CONSOLE LIGHT
The console light
s
1
will turn on whenever the
parking lights or headlights are illuminated.
The console light brightness can be adjusted
with the illumination brightness control.
The personal lights on the overhead console can
be swiveled 360 degrees. To turn on the light,
press the button. Press the button again to turn
off the light.
LIC0587
LIC0588
PERSONAL LIGHTS
2-54
Instruments and controls
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
To turn the map lights on, press the switches. To
turn them off, press the switches again.
CAUTION
Do not use for extended periods of time
with the engine stopped. This could result
in a discharged battery.
The cargo light on the overhead trim has a three-
position switch. To operate, push the switch to
the desired position.
ON: The light is illuminated.
Normal (center) position: The light illuminates
when the lift gate or glass hatch is opened. The
light turns off when the lift gate or glass hatch is
closed.
OFF: The light does not illuminate regardless of
lift gate position or lock status.
The HomeLink
T Universal Transceiver provides a
convenient way to consolidate the functions of up
to three individual hand-held transmitters into
one built-in device.
HomeLink
T Universal Transceiver:
● Will operate most Radio Frequency (RF)
devices such as garage doors, gates, home
and office lighting, entry door locks and se-
curity systems.
● Is powered by your vehicle’s battery. No
separate batteries are required. If the vehi-
cle’s battery is discharged or is discon-
nected, HomeLink
T will retain all program-
ming.
Once the HomeLink
T Universal Transceiver
is programmed, retain the original trans-
mitter for future programming procedures
(Example: new vehicle purchases). Upon
sale of the vehicle, the programmed
HomeLink
T Universal Transceiver buttons
should be erased for security purposes. For
additional information refer to “Program-
ming HomeLink
T” later in this section.
LIC0586
LIC0590
MAP LIGHTS
CARGO LIGHT
HOMELINK
T UNIVERSAL
TRANSCEIVER
Instruments and controls
2-55
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WARNING
● Do not use the HomeLinkT Universal
Transceiver with any garage door
opener that lacks safety stop and re-
verse features as required by federal
safety standards. (These standards be-
came effective for opener models
manufactured after April 1, 1982). A ga-
rage door opener which cannot detect
an object in the path of a closing garage
door and then automatically stop and
reverse, does not meet current federal
safety standards. Using a garage door
opener without these features in-
creases the risk of serious injury or
death.
● During the programming procedure
your garage door or security gate will
open and close (if the transmitter is
within range). Make sure that people or
objects are clear of the garage door,
gate, etc. that you are programming.
● Your vehicle’s engine should be turned
off while programming the HomeLink
T
Universal Transceiver.
PROGRAMMING HOMELINK
T
1. To begin, press and hold the two outer
HomeLink
T buttons (to clear the memory)
until the indicator light
s
1
blinks (after
20 seconds). Release both buttons.
2. Position the end of the hand-held transmitter
1 - 3 inches (26 - 76 mm) away from the
HomeLink
T surface.
3. Using both hands, simultaneously press and
hold both the HomeLink
T button you want to
program and the hand-held transmitter but-
ton.
DO NOT release the buttons until step 4 has
been completed.
WIC0986
WIC0987
2-56
Instruments and controls
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
4. Hold down both buttons until the indicator
light on the HomeLink
T flashes, changing
from a “slow blink” to a “rapidly flashing
blink”. This could take up to 90 seconds.
When the indicator light flashes rapidly, both
buttons may be released. The rapidly flash-
ing light indicates successful programming.
To activate the garage door or other pro-
grammed device, press and hold the pro-
grammed HomeLink
T button — releasing
when the device begins to activate.
5. If the indicator light on the HomeLink
T blinks
rapidly for 2 seconds and then turns solid,
HomeLink
T has picked up a “rolling code”
garage door opener signal. You will need to
proceed with the next steps to train the
HomeLink
T to complete the programming
which may require a ladder and another per-
son for convenience.
6. Press and release the “smart” or “learn” pro-
gram button located on the garage door
opener’s motor to activate the “training
mode”. This button is usually located near
the antenna wire that hangs down from the
motor. If the wire originates from under a
light lens, you will need to remove the lens to
access the program button.
NOTE:
Once you have pressed and released the
program button on the garage door open-
er’s motor and the “training light” is lit, you
have 30 seconds in which to perform step 7.
Use the help of a second person for conve-
nience to assist when performing this step.
7. Within 30 seconds of pressing and releas-
ing the garage door opener program button,
quickly and firmly press and release the
HomeLink
T button you’ve just programmed.
Press and release the HomeLink
T button up
to 3 times to complete the training.
8. Your HomeLink
T button should now be pro-
grammed. (To program the remaining
HomeLink
T buttons for additional door or
gate openers, follow steps 2-4 only.)
NOTE:
Do not repeat step 1 unless you want to
“clear”
all
previously
programmed
HomeLink
T buttons.
If you have any questions or are having difficulty
programming your HomeLink
T buttons, refer to
the HomeLink
T web site at: www.homelink.com
or call 1-800-355-3515.
PROGRAMMING HOMELINK
T FOR
CANADIAN CUSTOMERS
Prior to 1992, D.O.C. regulations required hand-
held transmitters to stop transmitting after 2 sec-
onds. To program your hand-held transmitter to
HomeLink
T, continue to press and hold the
HomeLink
T button (see steps 2 - 4 under “Pro-
gramming HomeLink
T”) while you press and re-
press (“cycle”) your hand-held transmitters every
2 seconds until the indicator light flashes rapidly
(indicating successful programming).
NOTE:
When programming a garage door opener,
etc., it is advised to unplug the device dur-
ing the “cycling” process to prevent pos-
sible damage to the garage door opener
components.
OPERATING THE HOMELINK
T
UNIVERSAL TRANSCEIVER
The HomeLink
T Universal Transceiver (once pro-
grammed) may now be used to activate the ga-
rage door, etc. To operate, simply press the ap-
propriate programmed HomeLink
T Universal
Transceiver button. The red indicator light will
illuminate while the signal is being transmitted.
Instruments and controls
2-57
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
PROGRAMMING TROUBLE-
DIAGNOSIS
If the HomeLink
T does not quickly learn the hand-
held transmitter information:
● replace the hand-held transmitter batteries
with new batteries.
● position the hand-held transmitter with its
battery area facing away from the
HomeLink
T surface.
● press and hold both the HomeLinkT and
hand-held transmitter buttons without inter-
ruption.
● position the hand-held transmitter 1 -
3 inches (26 - 76 mm) away from the
HomeLink
T surface. Hold the transmitter in
that position for up to 15 seconds. If
HomeLink
T is not programmed within that
time, try holding the transmitter in another
position – keeping the indicator light in view
at all times.
If you continue to have programming difficulties,
please contact the INFINITI Consumer Affairs
Department. The phone numbers are located in
the Foreword of this manual.
CLEARING THE PROGRAMMED
INFORMATION
Individual buttons cannot be cleared. However,
to clear all programming, press and hold the two
outside buttons and release when the indicator
light begins to flash (approximately 20 seconds).
REPROGRAMMING A SINGLE
HOMELINK
T BUTTON
To reprogram a HomeLink
T Universal Transceiver
button, complete the following.
1. Press and hold the desired HomeLink
T but-
ton. Do not release the button until step 4
has been completed.
2. When the indicator light begins to flash
slowly (after 20 seconds), position the
hand-held transmitter 1 - 3 inches (26 -
76 mm) away from the HomeLink
T surface.
3. Press and hold the hand-held transmitter
button.
4. The HomeLink
T indicator light will flash, first
slowly and then rapidly. When the indicator
light begins to flash rapidly, release both
buttons.
The HomeLink
T Universal Transceiver button has
now been reprogrammed. The new device can
be activated by pushing the HomeLink
T button
that was just programmed. This procedure will
not affect any other programmed HomeLink
T
buttons.
IF YOUR VEHICLE IS STOLEN
If your vehicle is stolen, you should change the
codes of any non-rolling code device that has
been programmed into HomeLink
T. Consult the
Owner’s Manual of each device or call the manu-
facturer or dealer of those devices for additional
information.
When your vehicle is recovered, you will
need to reprogram the HomeLink
T Univer-
sal Transceiver with your new transmitter
information.
FCC Notice:
This device complies with FCC rules part 15
and RSS-210 of Industry Canada. Opera-
tion is subject to the following two condi-
tions:
(1) This device may not cause harmful in-
terference and (2) This device must accept
any interference that may be received, in-
cluding interference that may cause undes-
ired operation.
2-58
Instruments and controls
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
This transmitter has been tested and com-
plies with FCC and DOC/MDC rules.
Changes or modifications not expressly ap-
proved by the party responsible for compli-
ance could void the user’s authority to op-
erate the equipment.
DOC: ISTC 1763K1313
FCC I.D. CV2V67690
Instruments and controls
2-59
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
2-60
Instruments and controls
MEMO
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3 Pre-driving checks and adjustments
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Intelligent keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
INFINITI vehicle immobilizer system keys . . . . . . . . . . 3-3
Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Locking with key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Locking with inside lock knob . . . . . . . . . . . . . . . . . . . . 3-4
Locking with power door lock switch . . . . . . . . . . . . . 3-5
Vehicle speed sensing door lock mechanism . . . . . . 3-5
Child safety rear door lock. . . . . . . . . . . . . . . . . . . . . . . 3-6
Intelligent Key system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Operating range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Door locks/unlocks precaution . . . . . . . . . . . . . . . . . . . 3-8
Intelligent Key operation . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
How to use the remote keyless entry
function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-12
Warning signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-14
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
Operating the power lift gate. . . . . . . . . . . . . . . . . . . . 3-17
Cancel switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-19
Lift gate release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-20
Glass hatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-20
Fuel-filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-21
Fuel-filler cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-21
Steering wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-22
Tilt operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-22
Entry/Exit function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-24
Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-24
Automatic anti-glare rearview mirror . . . . . . . . . . . . . 3-24
Outside mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-25
Automatic drive positioner . . . . . . . . . . . . . . . . . . . . . . . . . 3-26
Memory storage function . . . . . . . . . . . . . . . . . . . . . . . 3-27
Entry/exit function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28
System operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/29/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
1.
Two Intelligent Keys
2.
Mechanical keys (inside Intelligent
Keys)
3.
Key number plate
INTELLIGENT KEYS
Your vehicle can only be driven with the Intelligent
Keys which are registered to your vehicle’s Intel-
ligent Key system components and the INFINITI
Vehicle Immobilizer System components.
Never leave these keys in the vehicle.
As many as 4 Intelligent Keys can be registered
and used with 1 vehicle. The new keys must be
registered by an INFINITI dealer prior to use with
the Intelligent Key system and the INFINITI Ve-
hicle Immobilizer System of your vehicle. Since
the registration process requires erasing all
memory in the Intelligent Key components when
registering new keys, be sure to take all Intelligent
Keys that you have to the INFINITI dealer.
CAUTION
● Do not allow the Intelligent Key, which
contains electrical components, to
come into contact with water or salt
water. This could affect the system
function.
● Do not drop the Intelligent Key.
● Do not strike the Intelligent Key sharply
against another object.
● Do not place the Intelligent Key for an
extended period in an area where tem-
peratures exceed 140°F (60°C).
● Do not attach the Intelligent Key with a
key holder that contains a magnet.
● Do not place the Intelligent Key near
equipment that produces a magnetic
field, such as a TV, audio equipment and
personal computers.
Mechanical key
The Intelligent Key contains the mechanical key,
which can be used in case of a discharged bat-
tery.
To remove the mechanical key, release the lock
knob on the back of the Intelligent Key.
To install the mechanical key, firmly insert it into
the Intelligent Key until the lock knob returns to
the lock position.
The mechanical key can be used for operation in
the same way as an ordinary key.
WPD0427
SPA1951
KEYS
3-2
Pre-driving checks and adjustments
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CAUTION
Always carry the mechanical key installed
in the Intelligent Key slot.
Valet hand-off
When you have to leave a key with a valet, give
them the Intelligent Key itself and keep the me-
chanical key with you to protect your belongings.
To prevent the glove box or console box from
being opened during valet hand-off, follow the
procedure below.
1. Remove the mechanical key from the Intelli-
gent Key.
2. Lock the glove box or console box with the
mechanical key.
3. Hand the Intelligent Key to the valet and
keep the mechanical key with you.
See “Storage” in the “Instruments and controls”
section.
INFINITI VEHICLE IMMOBILIZER
SYSTEM KEYS
You can only drive your vehicle using the master
or valet keys which are registered to the INFINITI
Vehicle Immobilizer System components in your
vehicle. These keys have a transponder chip in
the key head.
The master key can be used for all the locks.
The valet key cannot be used for the console box
lock.
To protect belongings when you leave a key with
someone, give them the valet key only.
Never leave these keys in the vehicle.
Additional or replacement keys:
If you still have a key, the key number is not
necessary when you need extra INFINITI Vehicle
Immobilizer System keys. Your dealer can dupli-
cate your existing key. As many as five INFINITI
Vehicle Immobilizer System keys can be used
with one vehicle. You should bring all INFINITI
Vehicle Immobilizer System keys that you have to
your INFINITI dealer for registration. This is be-
cause the registration process will erase the
memory of all key codes previously registered
into the INFINITI Vehicle Immobilizer System. Af-
ter the registration process, these components
will only recognize keys coded into the INFINITI
Vehicle Immobilizer System during registration.
Any key that is not given to your dealer at the time
of registration will no longer be able to start your
vehicle.
Do not allow the immobilizer system key, which
contains an electrical transponder, to come into
contact with salt water. This could affect system
function.
WARNING
● Always have the doors locked while
driving. Along with the use of seat belts,
this provides greater safety in the event
of an accident by helping to prevent
persons from being thrown from the
vehicle. This also helps keep children
and others from unintentionally open-
ing the doors, and will help keep out
intruders.
● Before opening any door, always look
for and avoid oncoming traffic.
● Do not leave children unattended inside
the vehicle. They could unknowingly ac-
tivate switches or controls. Unattended
children could become involved in seri-
ous accidents.
DOORS
Pre-driving checks and adjustments
3-3
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
LOCKING WITH KEY
The power door lock system allows you to lock or
unlock all doors at the same time.
Turning the key toward the front
s
1
of the vehicle
locks all doors.
Turning the key one time toward the rear
s
2
of the
vehicle unlocks that door. From that position,
returning the key to neutral
s
3
(where the key can
only be removed and inserted) and turning it
toward the rear again within 5 seconds unlocks
all doors
s
4
.
Opening and closing windows
The driver’s door key operation allows you to
open and close windows equipped with auto-
matic operation at the same time.
● To open the windows, turn the driver’s door
key toward the rear of the vehicle for longer
than 1 second after the door is unlocked.
● To close the windows, turn the driver’s door
key to the front of the vehicle for longer
than 1 second after the door is locked.
Windows stop when the key cylinder is released.
LOCKING WITH INSIDE LOCK
KNOB
To lock the door without the key, move the inside
lock knob to the lock position
s
1
, then close the
door.
To unlock the door without the key, move the
inside lock knob to the unlock position
s
2
.
Driver’s side
LPD0240
Inside lock
LPD0241
3-4
Pre-driving checks and adjustments
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
LOCKING WITH POWER DOOR
LOCK SWITCH
To lock all the doors without a key, push the door
lock switch (driver’s or front passenger’s side), to
the lock position
s
1
. When locking the door this
way, be certain not to leave the key inside the
vehicle.
To unlock all the doors without a key, push the
door lock switch (driver’s or front passenger’s
side) to the unlock position
s
2
.
Lockout protection
When the power door lock switch (driver’s or
front passenger’s side) is moved to the lock
position with the key in the ignition and any door
open, all doors will lock and then unlock auto-
matically. This helps to prevent the keys from
being accidently locked inside the vehicle.
VEHICLE SPEED SENSING DOOR
LOCK MECHANISM
● All doors will be locked automatically when
the vehicle speed reaches 15 MPH
(24 km/h).
● All the doors will unlock automatically when
the ignition switch is turned to the Off posi-
tion.
● The lock and unlock mechanism work inde-
pendently of each other:
– Both the automatic lock and automatic
unlock feature can be enabled.
– The automatic lock feature can be en-
abled while the automatic unlock is dis-
abled.
– The automatic lock feature can be dis-
abled while the automatic unlock is en-
abled.
– Both the automatic lock and automatic
unlock feature can be disabled.
How to enable and disable the lock
feature
To activate or deactivate the vehicle speed sens-
ing door lock mechanism, perform the following
procedure.
1. Close all doors.
2. Turn the ignition switch to the ON position.
3. Within 20 seconds, push and hold the
power door lock switch to the LOCK posi-
tion for more than 5 seconds.
4. When activated, the hazard indicator will
flash twice. When deactivated, the hazard
indicator will flash once.
WPD0381
Pre-driving checks and adjustments
3-5
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
How to enable and disable the unlock
feature
To activate or deactivate the automatic door un-
lock mechanism, perform the following proce-
dure:
1. Close all doors.
2. Turn the ignition switch to the ON position.
3. Within 20 seconds, push and hold the
power door lock switch to the UNLOCK
position for more than 5 seconds.
4. When activated, the hazard indicator will
flash twice. When deactivated, the hazard
indicator will flash once.
CHILD SAFETY REAR DOOR LOCK
Child safety locks help prevent the rear doors
from being opened accidentally, especially when
small children are in the vehicle.
The child safety lock levers are located on the
edge of the rear doors.
When the lever is in the lock position, the
door can be opened only from the outside.
WARNING
Radio waves could adversely affect elec-
tric medical equipment. Those who use a
pacemaker should contact the electric
medical equipment manufacturer for the
possible influences before use.
The Intelligent Key system can operate all the
door locks using the remote controller function or
pushing the request switch on the vehicle without
taking the key out from a pocket or purse. The
operating environment and/or conditions may af-
fect the Intelligent Key system operation.
Be sure to read the following before using the
Intelligent Key system.
CAUTION
● Be sure to carry the Intelligent Key with
you when operating the vehicle.
● Never leave the Intelligent Key in the
vehicle when you leave the vehicle.
The Intelligent Key is always communicating with
the vehicle as it receives radio waves. The Intel-
ligent Key system transmits weak radio waves.
Environmental conditions may interfere with the
operation of the Intelligent Key system under the
following operating conditions.
LPD0420
INTELLIGENT KEY SYSTEM
3-6
Pre-driving checks and adjustments
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
● When operating near a location where
strong radio waves are transmitted, such as
a TV tower, power station and broadcasting
station.
● When in possession of wireless equipment,
such as a cellular telephone, transceiver,
and CB radio.
● When the Intelligent Key is in contact with or
covered by metallic materials.
● When any type of radio wave remote control
is used nearby.
● When the Intelligent Key is placed near an
electric appliance such as a personal com-
puter.
● When the vehicle is parked near a parking
meter.
In such cases, correct the operating conditions
before using the Intelligent Key function or use
the mechanical key.
Although the life of the battery varies depending
on the operating conditions, the battery’s life is
approximately 2 years. If the battery is dis-
charged, replace it with a new one.
When the Intelligent Key battery is low, an indi-
cator illuminates in the Vehicle Information Dis-
play. See “Vehicle Information Display” in the
“Instrument Control” section.
Since the Intelligent Key is continuously receiving
radio waves, if the key is left near equipment
which transmits strong radio waves, such as sig-
nals from a TV and personal computer, the bat-
tery life may become shorter.
For information regarding replacement of a bat-
tery, see “Battery” in the “Maintenance and do-it-
yourself” section.
Because the steering wheel is locked electrically,
unlocking the steering wheel with the ignition
switch in the LOCK position is impossible when
the vehicle battery is completely discharged. Un-
locking the steering wheel is impossible even if
the Intelligent Key is inserted into the ignition
cylinder. Pay special attention that the vehicle
battery is not completely discharged.
As many as 4 Intelligent Keys can be registered
and used with one vehicle. For information about
the purchase and use of additional Intelligent
Keys, contact an INFINITI dealer.
CAUTION
● Do not allow the Intelligent Key, which
contains electrical components, to
come into contact with water or salt
water. This could affect the system
function.
● Do not drop the Intelligent Key.
● Do not strike the Intelligent Key sharply
against another object.
● Do not change or modify the Intelligent
Key.
● Wetting may damage the Intelligent
Key. If the Intelligent Key gets wet, im-
mediately wipe until it is completely dry.
● Do not place the Intelligent Key for an
extended period in an area where tem-
peratures exceed 140°F (60°C).
● Do not attach the Intelligent Key with a
key holder that contains a magnet.
● Do not place the Intelligent Key near
equipment that produces a magnetic
field, such as a TV, audio equipment and
personal computers.
If an Intelligent Key is lost or stolen, INFINITI
recommends erasing the ID code of that Intelli-
gent Key from the vehicle. This may prevent the
unauthorized use of the Intelligent Key to operate
the vehicle. For information regarding the erasing
procedure, contact an INFINITI dealer.
Pre-driving checks and adjustments
3-7
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
OPERATING RANGE
The Intelligent Key functions can only be used
when the Intelligent Key is within the specified
operating range from the request switch
s
1
.
When the Intelligent Key battery is discharged or
strong radio waves are present near the operat-
ing location, the Intelligent Key system’s operat-
ing range becomes narrower, and the Intelligent
Key may not function properly.
The operating range is within 31.50 in (80 cm)
from each request switch
s
1
.
If the Intelligent Key is too close to the door glass,
handle or rear bumper, the request switches may
not function.
When the Intelligent Key is within the operating
range, it is possible for anyone, even someone
who does not carry the Intelligent Key, to push the
request switch to lock/unlock the doors.
DOOR LOCKS/UNLOCKS
PRECAUTION
● Do not push the door handle request switch
with the Intelligent Key held in your hand as
illustrated. The close distance to the door
handle will cause the Intelligent Key system
to have difficulty recognizing that the Intelli-
gent Key is outside the vehicle.
● After locking with the door handle request
switch, verify the doors are securely locked
by testing them.
● To prevent the Intelligent Key from being left
inside the vehicle, make sure you carry the
key with you and then lock the doors.
SPA2038
WPD0375
3-8
Pre-driving checks and adjustments
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
● Do not pull the door handle before pushing
the door handle request switch. The door
will be unlocked but will not open. Release
the door handle once and pull it again to
open the door.
INTELLIGENT KEY OPERATION
You can lock or unlock the doors without taking
the key out of your pocket or bag.
When you carry the Intelligent Key with you, you
can lock or unlock all doors by pushing the door
handle request switch within the range of opera-
tion.
Locking doors
1. Move the selector to the P (Park) position,
push the ignition switch to the LOCK posi-
tion and make sure you carry the Intelligent
Key with you.
2. Close all doors.
3. Push any door handle request switch while
carrying the Intelligent Key with you.
4. All doors and the rear liftgate will lock.
5. The hazard warning lights flash twice and
the outside buzzer sounds twice.
WPD0424
WPD0417
Pre-driving checks and adjustments
3-9
Z
REVIEW COPY—
2009 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
02/28/08—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст